• 설비공학논문집
• /
• 제16권2호
• /
• pp.128-134
• /
• 2004

In order to verify and take measures against a variety of troubles which cannot be predicted in a well-controlled laboratory, it is necessary that solar system should be experimented in an actual situation during a long period. Through this experiment it can be also understood how the load pattern and operational conditions expected in a design process become different to those in the actual running, which can be applied to a new system design. We installed 6 kW solar hot water heating system with a shower facility and operated during 7 months. As a result, average 8.3 persons took a shower a day； solar fraction is 71％ and total collector efficiency is 40％ during the periods from March to September. We confirmed several troubles encountered in the actual situation and considered practical center-measures.

• 설비공학논문집
• /
• 제15권8호
• /
• pp.641-651
• /
• 2003

In order to assess the reliability of a building energy simulation program (TRNSYS) from the standpoint of user, a set of verification experiment and calculation of cooling load for a test space is carried out. This work is a complement of the previous study that dealt with heating load for the same space. The test space is kept airtight to eliminate the source of uncertainties in modeling. A window-mounted, on/off controlled air-conditioner is used for cooling, whose performance has been established a priori. The calculation encompasses two models for evaluating cooling load in TRNSYS: energy rate control and temperature level control. Comparison of the total cooling loads obtained from different sets of experimental data enables to validate the measurements. The experimental result shows that the latent load is fairly large even in the absence of apparent air change in the space, which needs to be clarified. Each of hourly and daily accumulated sensible loads is compared between the experiment and two calculation models. Despite an inconsistency associated with solar irradiation, both of the models agree favorably with the experiment within a tolerance, illustrating their capability of properly predicting space thermal loads.

• Journal of information and communication convergence engineering
• /
• 제19권1호
• /
• pp.42-47
• /
• 2021

Multimedia Authoring Tool is a tool for creating multimedia presentations. With this tool, a user can produce playable multimedia documents. A Multimedia Authoring Tool requires input in the form of a spatial layout and a temporal layout. Users can make many mistakes in creating multimedia presentations and verification is required in the Multimedia Authoring process in order to produce multimedia documents. In this study, two verification phases are proposed: Time Computation and Spatiotemporal Conflict Verification. In the experiment conducted for this study, two kinds of verification were carried out: The use of single-phase verification and the use of double-phase verifications. By using these two types of verification, it became easier to successfully detect errors in the spatial and temporal layouts, and the types of verification have also been successful in increasing the success of error detection.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.46-49
• /
• 2003

The use of confidence measures for word/utterance verification has become art essential component of any speech input application. Confidence measures have applications to a number of problems such as rejection of incorrect hypotheses, speaker adaptation, or adaptive modification of the hypothesis score during search in continuous speech recognition. In this paper, we present a new utterance verification method using vowel string. Using subword HMMs of VCCV unit, we create anti-models which include vowel string in hypothesis words. The experiment results show that the utterance verification rate of the proposed method is about 79.5%.

• 설비공학논문집
• /
• 제14권2호
• /
• pp.153-160
• /
• 2002

As a way to assess the reliability of programs for building energy analysis, verification experiment and calculation of heating load are simultaneously conducted for a well-defined test space. Experimental conditions are carefully set to minimize uncertainties associated with radiation heating, air change, infiltration, and room-to-room interaction. Dyna- mic load calculations using TRNSYS, which are performed for two different computation domains, rely on the energy rate control that represents inherent load characteristics of a space. The predicted instantaneous heating load favorably simulates the overall behavior the measured one, though the latter fluctuates much more rapidly than the former Comparison of the accumulative load between the experiment and calculations shows a close agreement within an engineering tolerance, regardless of the computation model. It is deduced from such findings that the present experimental results along with weather information can serve as a set of reference data for validating load calculation softwares from the users'standpoint. In order to enhance the completeness of this work, a complementary study on the cooling load for the same test space is highly recommended.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.317-322
• /
• 1994

The design and performance verification of collocated capacitance sensor system for magnetic bearing is presented. Noncollocation between actuators and sensors may cause unstable rotor behavior. The capacitance sensor is not affected by magnetic field. PCB type capacitance sensor is installed between magnetic bearing polse. so, collocation of sensors and actuators can be achieved. Experiment of sensor's static and dynamic charactistics is conducted. Modeling of the rotor system supported by magnetic bearing is made. And performance comparison between simulation and experiment is showed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.1-17
• /
• 2017

Mobile Cloud Computing has become a promising computing platform. It moves users' data to the centralized large data centers for users' mobile devices to conveniently access. Since the data storage service may not be fully trusted, many public verification algorithms are proposed to check the data integrity. However, these algorithms hardly consider the huge computational burden for the verifiers with resource-constrained mobile devices to execute the verification tasks. We propose an energy-efficient algorithm for assigning verification tasks (EEAVT) to optimize the energy consumption and assign the verification tasks by elastic and customizable ways. The algorithm prioritizes verification tasks according to the expected finish time of the verification, and assigns the number of checked blocks referring to devices' residual energy and available operation time. Theoretical analysis and experiment evaluation show that our algorithm not only shortens the verification finish time, but also decreases energy consumption, thus improving the efficiency and reliability of the verification.

• 한국화재소방학회논문지
• /
• 제23권4호
• /
• pp.137-144
• /
• 2009

본 논문은 광전식연기감지기 현장점검기기의 문제점에 관한 연구로서 현재 소방점검 시 광전식연기감지기의 성능확인을 위해 사용되는 A Type(향), B Type(디메틸실리콘오일), C Type(탄화수소혼합물)의 점검기기들을 실험대상으로 선정하고, 현장점검기기의 문제점을 도출하고자 신뢰성확인실험 및 성능확인실험, 연기시료에 따른 감지기 성능변화 실험을 실시하였다. 실험결과 소방점검 시 현장점검기기를 이용한 감도실험은 연기농도조건 및 풍속조건, 연기시료의 문제점을 확인할 수 있었으며, 결과적으로 현재 소방점검시 사용되는 광전식연기감지기 현장점검기기의 신뢰성에 문제가 있는 것을 확인할 수 있었다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.216-219
• /
• 2003

Among the techniques to protect private information by adopting biometrics, speaker verification is expected to be widely used due to advantages in convenient usage and inexpensive implementation cost Speaker verification should achieve a high degree of the reliability in the verification nout the flexibility in speech text usage, and the efficiency in verification system complexity. Continuants have excellent speaker-discriminant power and the modest number of phonemes in the category, and multilayer perceptrons (MLPs) have superior recognition ability and fast operation speed. In consequence, the two provide viable ways for speaker verification system to obtain the above properties. This paper implements a system to which continuants and MLPs are applied, and evaluates the system using a Korean speech database. The results of the experiment prove that continuants and MLPs enable the system to acquire the three properties.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.1-8
• /
• 2017

The visual inspection of electronic parts consists of two steps: automatic visual inspection and verification inspection. In the stage of a verification inspection, the human inspector sequentially inspects all the areas which detected in the automatic inspection. In this study, we propose an algorithm to determine the order of verification inspection by Bayes inference well known in the field of machine learning. This is a method of prioritizing a region estimated to have a high probability of defect using experience data of past inspection. This algorithm was applied to the visual inspection of ultraviolet filters to verify its effectiveness. As a result of the comparison experiment, it was confirmed that the verification inspection can be completed 30% of the conventional method by adapting proposed algorithm.