• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.190-199
• /
• 2003

This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.74-82
• /
• 2002

The present study is aimed to investigate the effect of the safety hat on the balance of body temperature by observation of the physiological response under hot working environment. The experiment was carried out in a climate chamber of 3$0^{\circ}C$, 50%RH for 70 minutes. To compare the two kinds of safety hat, 5 healthy male subjects worn safety hat without hole (called 'without hole') or safety hat with hole (called 'with hole') according to a randomized cross-over design. The main results of this study are as fellows: Rectal temperature and heart rate were significantly lower level in 'with hole'than in 'without hole'. The mean skin temperature was significantly higher in 'without hole'than in 'with hole'. Blood pressure were significantly low in 'with hole'. Sweat rate which was measured by weight loss before and after experiment was higher in 'without hole'. In subjective ratings, subjects replied more hot, more uncomfortable and more wet, they felt more fatigue in condition of 'without hole'. Work ability which was measured by a grip strength dynamometer was higher in 'with hole'. Safety hat which can be used for safety of the brain in work place is meaningful device of behavioral thermoregulatory response under the hot working environment. The safety hat which is designed for proper ventilation and hygiene can maintain the homeostasis of body temperature by releasing body temperature efficiently.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.555-562
• /
• 2006

The objective of this study was to evaluate the effects of dietary cation-anion difference (DCAD) with or without ruminally protected fat and niacin on the thermoregulatory ability, milk yield and milk composition of lactating dairy cows during summer in Korea. Thirty mid-lactating Holstein cows (134±12.4 DIM and 23.4±2.3kg/d of milk yield) were divided into three groups (10 animals/group). Cows were housed in a free-stall barn and were provided with forced- air ventilation (wind velocity = 4 m/s) using 41 cm diameter fans. Diet one was formulated to contain low DCAD (+15 DCAD) while the remaining two diets were higher in DCAD (+30 DCAD). One higher DCAD diet was formulated to contain by-pass fat and the second higher DCAD diet contained the niacin along with by-pass fat. The maximum ambient temperature during July was 28.5℃ which could be seen as a period of mild heat stress. As summer progressed, August was characterized as a severe heat stress condition with maximum ambient temperature (32.4℃) and THI (74.0). Dry matter, crude protein and total digestible nutrients intake was not affected by the DCAD level and supplementation of ruminally protected fat or niacin. Milk production was higher in cows fed diets supplemented with fat and niacin than those fed un-supplemented diet. No difference in milk yield was observed in cows fed diets supplemented with fat or niacin plus fat. Milk fat and rectal temperature were not affected by the DCAD level and supplementation of ruminally protected fat or niacin. However, respiration rate was decreased in cows fed diets supplemented with either fat or fat and niacin compared to those fed. The results of the present study indicated that higher DCAD (+30) and supplementation of fat along with niacin can somehow mitigate the negative effects of heat stress on milk yield and physiology of lactating Holsteins during July and August in Korea. In present study reduced respiration rate and increased milk yield in lactating cows may be attributed to the cooling effect of supplemented fat along with vasodilatory functions of niacin. (Key Words: DCAD, Heat stress, THI, milk yield, Milk fat, Holstein)

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.3
• /
• pp.250-258
• /
• 1993

Background: After general anesthesia, decrease of functional residual capacity and lung compliance, ventilation/perfusion imbalance, and transpulmonary shunting can provoke hypoxemia during postoperative periods. Diaphragmatic dysfunction may be the main cause of these physiological abnormalities. Thus, we evaluated the change of pulmonary function after general anesthesia according to the operative sites, which could suggest clinical course and critical period of respiratory care of postoperative patients. Method: Preoperative portable spirometric evaluation and arterial blood gas analysis were performed at sitting or most-sitting position just previous day of surgery. Pulmonary function tests were also as same condition from postoperative day 1 to day 5. Results: 1) For thoracic surgery, FEV1 and FVC were not recovered at day 5, but FEV1/FVC was not decreased. $PaCO_2$ was slightly elevated at postoperative one day. 2) After upper abdominal surgery, postoperative day 5 did not show the recovery of FEV1 and FVC, but mild hypoxemia was developed at postoperative day 1. 3) Pulmonary function was recovered as preoperative value at postoperative day 5 in lower abdominal operation, but mild hypoxemia was also noted at postoperative day 1. 4) Surgery of peripheral areas did not show significant pulmonary function change and hypoxemia and hypercapnia from postoperative day 1. Conclusion: Surgery involving diaphragm provoke significant postoperative pulmonary function change after day 5. For the operation of peripheral sites adequate respiratory care during operation and postoperative period within 24 hours could prevent patients from respiratory complication.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.239-254
• /
• 1996

Health services on industrial noisy environment have been provided only for noise-induced hearing loss management until now. But gradually, modem diseases and death have come to be related to stress and mental health deeply, therefore noise-induced mental disorder, like a stress became very important. In this point, the purpose of this study was to analyze the relationship between noise exposure level in worksite and workers' stress symptoms. This study included a survey of 786 manual workers selected from 89 worksites in 21 factories in Puchon. The results were as follows: 1. For demographic characteristics, most of the workers were males(80.8%), the $20\sim29years$ old were 34.5% and those who graduated from high school were 65.3%. The workers whose monthly income ranged from 100,000 to 800,000 won were 37.5% and who have a religion were 47.9%. 2. For occupational characteristics, workers who had worked $1\sim5$ years in the factories were 33.0%. Those who were much for them workload were 43.9% and who worked more than 8 hours a day were 73.9%. Those who were disatisfied with their job and pay were 31.9% and 50.6%. The workers who responsed ventilation condition of their worksites were bad were 51.9% and the dissatisfed with working environment of their worksites were 45.9%. 3. Workers who were suffering from tinnitus were 53.3% and those who perceived hearing loss were 50.1%. Persons who reported they always wore earplugs at work were 35.4%. Those who felt earplugs bigger than their ears were 30.6% and those who experienced eardiseases caused by earplugs were 25.6%. 4. For the noise exposure level in worksite, workers who were exposed to $80\sim90dB$ were 30.3%, $90\sim100dB$ were 26.4% and $50\sim70dB$ were 19.2%. 5. Workers' stress symptoms were significantly related to marital status and their monthly income(p<0.05). Workers who were single and had lower monthly income showed higher PSI (Psychiatric Symptom Index) scores than those who were married and had higher monthly income. Higher PSI scores were also significantly related to $1\sim2$ days hight-work per week, much for them workload, dissatisfaction with their job, and bad relationship with their bosses and coworkers. 6. Higher PSI scores were significantly related to severe tinnitus and perceived hearing losso(p<0.001). Workers who felt the earplugs they use did not fit their ears showed significantly higher PSI scores(p<0.01). Workers who reported that they did not feel they need earplugs showed. significantly higher PSI scores (p<0.05). Increased experience of eardisease caused by earplugs that did not fit were also significantly related to higher PSI scores(p<0.01). 7. The higher noise exposure level in worksite from 80dB was, the more severe stress symptoms including PSI subparts were reported; Anxiety, Anger, Depression, and Cognitive disorder(p<0.001). 5. According to the results of stepwise multiple regression analysis, factors affecting workers' PSI scores were perceived hearing loss$(R^2=0.160)$, noise exposure level in worksite$(R^2=0.110)$, realtionship with coworkers, amount of workload, monthly income and relationship with bosses orderly and the total $R^2$ of this 6 factors was 0.371. 9. The most significant factors that have impact on manual workers' stress symptoms were perceived hearing loss and noise exposure level in worksite, especially noise exposure level in the worksite was the most affective factor on the depression symptom.

• Journal of Chest Surgery
• /
• v.35 no.11
• /
• pp.826-830
• /
• 2002

Prosthetic valve thrombosis(PVT) may be a life-threatening complication requiring prompt intervention. This is a case report of thrombolytic therapy for thrombosis of prosthetic mitral valve. A 47 year-old male admitted to the emergency room for abrupt onset of dyspnea. He had undergone mitral valve replacement(On-Ⅹ valve, 29mm) for mitral stenosis 8 months ago. The patient's international normalized ratio(INR) on admission was 1.09. The mechanical clicks were muffled and rales were heard in both lung fields. A transesophageal echocardiography(TEE) revealed prosthetic valve thrombosis with increased transvalvular pressure gradient(34 mmHg). The patient's condition needed to intubation for mechanical ventilation due to hemodynamic compromise, however his wife and relatives refused the surgical intervention due to financial problems. The patient was transferred to the cardiac care unit and we decided to perform thrombolytic therapy. A bolus of 1,500,000 IU of urokinase was given, followed by a drip of 1,500,000 IU for 1 hour. The patient did not improved hemodynamically; therefore, we gave 100 mg of tissue plasminogen activator(t-PA) for over 2 hours. During that time mechanical clicks were audible and hemodynamics of the patient improved progressively. A TEE showed disappearance of thrombus and decreased pressure gradient(1.7 mmHg) after 6 hours of thrombolytic therapy. The patient was recovered without any neurologic sequale and was discharged with administration of warfarin.

• Journal of Chest Surgery
• /
• v.32 no.4
• /
• pp.373-378
• /
• 1999

Background: Minimally invasive technique for various cardiac surgeries has become widely accepted since it has been proven to have distinct advantages for the patients. We describe here the results of our experiences of minimal incision in cardiac surgery. Material and Method: From February 1997 to November 1998, we successfully performed 31 cases of minimally invasive cardiac surgery. Male and female ratio was 17:14, and the patients age ranged from 1 to 75 years. A left parasternal incision was used in 9 patients with single vessel coronary heart disease. A direct coronary bypass grafting was done under the condition of the beating heart without cardiopulmonary bypass support(MIDCAB). Among these, one was a case of a reoperation 1 week after the first operation due to a kinked mammary artery graft. A right parasternal incision was used in one case of a redo mitral valve replacement. Mini-sternotomy was used in the remaining 21 patients. The procedures were mitral valve replacement and tricuspid annuloplasty in 6 patients, mitral valve replacement 5, double valve replacement 2, aortic valve replacement 1, removal of left atrial myxoma 1, closure of atrial septal defect 2, repair of ventricular septal defect 2, and primary closure of r ght ventricular stab wound 1. The initial 5 cases underwent a T-shaped mini-sternotomy, however, we adopted an arrow-shaped ministernotomy in the remaining cases because it provided better exposure of the aortic root and stability of the sternum after a sternal wiring. Result: The operation time, the cardiopulmonary bypass time, the aorta cross-clamping time, the mechanical ventilation time, the amount of chest tube drainage until POD#1, the chest tube indwelling time, and the duration of intensive care unit staying were in an acceptable range. There were two surgical mortalities. One was due to a rupture of the aorta cannulation site after double valve replacement on POD#1 in the mini-sternotomy case, and the other was due to a sudden ventricular arrhythmia after MIDCAB on POD#2 in the parasternal incision case. Postoperative complications were observed in 2 cases in which a cerebral embolism developed on POD#2 after a mini-sternotomy in mitral valve replacement and wound hematoma developed after a right parasternal incision in a single coronary bypass grafting. Neither mortality nor complication was directly related to the incision technique itself. Conclusion: Minimally invasive surgery using parasternal or mini-sternotomy incision can be used in cardiac surgeries since it is as safe as the standard full sternotomy incisions.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.134-153
• /
• 2015

When making urban planning, it is important to understand climate effect caused by urban structural changes. Seoul city applies UPIS(Urban Plan Information System) which provides information on urban planning scenario. Technology for analyzing climate effect resulted from urban planning needs to developed by linking urban planning scenario provided by UPIS and climate analysis model, CAS(Climate Analysis Seoul). CAS develops for analyzing urban climate conditions to provide realistic information considering local air temperature and wind flows. Quantitative analyses conducted by CAS for the production, transportation, and stagnation of cold air, wind flow and thermal conditions by incorporating GIS analysis on land cover and elevation and meteorological analysis from MetPhoMod(Meteorology and atmospheric Photochemistry Meso-scale model). In order to reflect land cover and elevation of the latest information, CAS used to highly accurate raster data (1m) sourced from LiDAR survey and KOMPSAT-2(KOrea Multi-Purpose SATellite) satellite image(4m). For more realistic representation of land surface characteristic, DSM(Digital Surface Model) and DTM(Digital Terrain Model) data used as an input data for CFD(Computational Fluid Dynamics) model. Eight inflow directions considered to investigate the change of flow pattern, wind speed according to reconstruction and change of thermal environment by connecting green area formation. Also, MetPhoMod in CAS data used to consider realistic weather condition. The result show that wind corridors change due to reconstruction. As a whole surface temperature around target area decreases due to connecting green area formation. CFD model coupled with CAS is possible to evaluate the wind corridor and heat environment before/after reconstruction and connecting green area formation. In This study, analysis of climate impact before and after created the green area, which is part of 'Connecting green network across the north and south in Seoul' plan, one of the '2020 Seoul master plan'.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.144-149
• /
• 2018

The eggs are incubated for 18 days through the generator and incubated in the developing incubator. During the developmental period, the weight loss of the fetus is correlated with the ventricular formation, and the proper ventricular formation is also associated with the healthy embryonic hatching and the egg hatching rate. However, in the incubator period of the domestic hatchery, it is a reality to acquire the resultant side by the Iranian standard weight measurement with the experience of the hatchery and the person concerned and the development period without the apparatus for measuring the present weight. As a result, prevalence of early mortality, hunger and illness during hatching are frequent. Monitoring the reduction of weaning weight is crucial to obtaining chick quality and hatching performance with weight changes within the development machine. Water loss is different depending on the size of eggs, egg shell, and elder group. We can expect to increase the hatching rate by measuring the weight change in real time and optimizing the ventilation change accordingly. There is a need to develop a real-time measurement system that can control 10 to 13% reduction of the total weight during hatching. The system through this study is a way to check the one - time directly when moving the existing egg, and it is impossible to control the measurement of the fetal water evaporation within the development period. Unlike systems that do not affect the hatching rate, four load cells are connected in parallel on the Arduino sketch board and the AT-command command is used to connect the mobile phone and computer in real time. The communication speed of Bluetooth was set to 15200 to match the communication speed of Arduino and Hyper-terminal program. The real - time monitoring system was designed to visually check the change of the weight of the fetus in the artificial incubator. In this way, we aimed to improve the hatching rate and health condition of the hatching eggs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.60-67
• /
• 2017

The purpose of this study was to evaluate the influence of landscaping shade materials' porosity on the Mean Radiant Temperature (MRT) of summer outdoors. The MRTs were measured under seven different types of black membranes with holes of 8mm diameter at different intervals applied on the top of wooden boxes, and compared with those of four additional control plots with or without shade and lateral boxes. The applied porosities were 0.5, 1, 2, 4, 8, 16%, and 32%, and three groups of three shades were compared sequentially from August 13 to September 8, 2016. The MRTs under the shade without lateral block, no shade with lateral block, and shade with lateral block were $33.08^{\circ}C$, $45.80^{\circ}C$, and $42.3^{\circ}C$, respectively, while that of no-shaded no-lateral screen was $44.26^{\circ}C$, based on records from 11:00 AM to 3:00 PM on the days with a peak globe temperature higher than $30^{\circ}C$. An ANCOVA analysis showed that the MRTs under the shades with 0.5, 1, 2, 4, 8, 16%, and 32% porosities were calculated as 43.40, 43.10, 41.49, 40.43, 39.61, $37.91^{\circ}C$, and $38.12^{\circ}C$, respectively, while that in the no shaded control box was $45.8^{\circ}C$. The curve fitted between MRTs and the porosity showed a U-shaped quadratic function with the minimum MRT at 16% practically or 22.5% statistically.