Objectives: The objective of this study was to evaluate the generating characteristics of VOCs and the exposure effect to chemicals among laundry workers and to identify the current status of occupational safety and health through health check-ups. Methods: During the six-month period from April to September 2015, this study quantitatively measured seven VOCs in ten laundries and carried out health examinations on 35 workers. Results: Comparing the monitoring results for the ten laundries, they were classified into three groups by ventilation system, dry-cleaning and size of shop. The average concentration of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 23.9, 15.6, 5.5, 2.8, 0.9, 0.3 and $1.3{\mu}g/m^3$, respectively. During dry-cleaning, VOC concentrations were 1.3-8.9 times higher than usual. On the other hand, at night the concentrations of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 64.3, 41.5, 12.2, 6.3, 1.1, 1.2 and $6.6{\mu}g/m^3$, respectively. The health checkup results for the 35 workers showed that 13 workers were diagnosed as normal, while 22 workers were diagnosed as requiring continuous monitoring or re-checkup of liver and hematogenous functions. Conclusions: Although the results of exposure evaluation to VOCs did not exceed reference value and items had a low correlation with health checkup items, it is necessary to improve indoor air quality due to VOC volatilization from clothes.
육상 및 해상에서 일어나는 화재를 진압하기 위한 가스계 소화설비 중 이산화탄소 소화설비는 우수한 성능 및 높은 경제성으로 인하여 널리 사용되고 있지만, 고농도 이산화탄소로 인한 질식사고가 빈번히 발생하여 안전문제가 항상 지적되어 왔다. 본 연구에서는 수치해석을 통하여 선박 내 압축기실의 이산화탄소 소화설비 화재 진압 특성을 예측하고, 이산화탄소 소화설비로 인한 질식사고를 방지하기 위한 2중 안전 제어기법을 제시하여, 이산화탄소 소화설비의 안전을 도모하였다. 수치해석 결과로는 4가지 시나리오를 선정하여, 화재발생 후 이산화탄소 소화설비 작동으로 인한 열발생률 변화, 온도변화, 이산화탄소 농도변화, 산소 농도변화 및 화재진압 특성을 고찰하였으며, 방호구역 내 환기팬 용량이 충분하지 않은 경우의 위험성 및 적절한 환기시스템의 필요성을 제시하였다.
Purpose: This study was conducted to investigate the hot air drying characteristics of squash slices depending on the drying conditions (input air velocity, input air temperature, and sample thickness). Methods: The developed drying system was equipped with a controllable air blower and electric finned heater, drying chamber, and ventilation fan. Squash (summer squash called Korean zucchini) samples were cut into slices of two different thicknesses (5 and 10 mm). These were then dried at two different input air temperatures (60 and $70^{\circ}C$) and air velocities (5 and 7 m/s). Six well-known drying models were tested to describe the experimental drying data. A non-linear regression analysis was applied to determine model constants and statistical indices such as the coefficient of determination ($R^2$), reduced chi-square (${\chi}^2$), and root mean square error (RMSE). In addition, the effective moisture diffusivity ($D_{eff}$) was estimated based on the curve of ln(MR) versus drying time. Results: The results clearly showed that drying time decreased with an increase in input air temperature. Slice thickness also affected the drying time. Air velocity had a greater influence on drying time at $70^{\circ}C$ than at $60^{\circ}C$ for both thicknesses. All drying models accurately described the drying curve of squash slices regardless of slice thickness and drying conditions; the Modified Henderson and Pabis model had the best performance with the highest R2 and the lowest RMSE values. The effective moisture diffusivity ($D_{eff}$) changes, obtained from Fick's diffusion method, were between $1.67{\times}10^{-10}$ and $7.01{\times}10^{-10}m^2/s$. The moisture diffusivity was increased with an increase in input air temperature, velocity, and thickness. Conclusions: The drying time of squash slices varied depending on input temperature, velocity, and thickness of slices. The further study is necessary to figure out optimal drying condition for squash slices with retaining its original quality.
There has been a rapid industrial progress in Korea since 1962 by the success of 5-year economic development plan, and the number of industrial work has also made a rapid increase. Consequently, the management of the occupational health for the purpose of promoting the health of industrial workers and improving the working environment is badly needed in these days. Health services on industrial noisy environment have been provided only for noise-induced hearing loss management until now. But gradually, modem diseases and death have come to be related to the stress and mental health, therefore noise-induced mental disorder, like a stress became very important. Thus, this study has been carried out to analyze the relationship between workers' stress symptoms and the perceived working environment and the perceived working conditions. This study included 786 industrial workers selected from II factories in Buchun. The results were as follows: 1. For demographic characteristics, most of the workers were males(75.7%), the 20~29 years old were 33.8% and those who graduated from high school were 56.1%. The workers whose monthly income ranged from 700,000 to 1,500,000 won were 37.9% and who has a religion were 49.0%. 2. For occupational characteristics, workers who had worked 5~10 years in the factories were 35.8%. Those who felt much for them workload were 42.7% and who worked more than 8 hours a day were 73.7%. Those who were dissatisfied with their pay and job were 51.1 % and 31.2%. The workers who responded ventilation condition of their worksites were bad were 50.4% and the dissatisfied with working environment of their worksites were 43.8%. 3. For the noise exposure level in worksite, workers who were exposed to 70∼90㏈ were 37.4%, 90∼100㏈ were 25.2% and 50∼70㏈ were 18.8%. 4. Workers∼ stress symptoms were significantly related to marital status and their monthly income(P〈0.05). Workers who were single and had lower monthly income showed higher PSI(Psychiatric Symptom Index) scores than those who were married and had higher monthly income. Higher PSI scores were also significantly related to the night-work, workload, dissatisfaction with their job, and bad relationship with their bosses or co-workers. 5. The higher noise exposure level in worksite from 80㏈ was, the more severe stress symptoms including PSI subparts were reported; Anxiety, Anger, Depression, and Cognitive disorder symptom(P〈0.001). 6. According to the results of stepwise multiple regression analysis, factors affecting workers' PSI scores were noise exposure level in worksite(R2=0.150), relationship with coworkers, amount of workload, monthly income and relationship with bosses orderly and the total R2 of this 6 factors was 29.7%.
워터 프런트에 있어서의 집합주택은 전면에 퍼지는 수역의 경관을 얻을 수 있어 사람들의 생활에 윤택이나 안락함 등을 가져다 준다. 그러나 시가지와는 다른 워터프런트만의 환경적 이점을 살릴 계획 수법이 확립되어 있다고는 말하기 어려운 것이 현상이다. 본 연구에서는 일본의 워터프런트(니시노미야하마와 비와코) 거주자를 대상으로 앙케이트 조사를 실시하여 친수 활동, 거주 환경 의식과 거주 선택 이유 등에 대해 비교 분석을 실시하였다. 그 결과 향후의 워터 프런트에 입지하는 집합주택 거주자들의 거주환경에 대한 의식과 거주선택이유의 상이점을 알 수 있었다. 또 각각의 워터프런트지역에서 염해나 해충에 대한 대책 등 지역환경 특성에 맞는 문제점을 경감 대책의 필요성과 수변에의 전망을 확보를 희망하고 있으며 "방의 넓이" "통풍" "전망 채광" "프라이버시의 확보"등 워터프런트에 입지하는 집합주택의 계획수립 시에 상기한 거주환경의 조성이 거주자들의 주거의식에 영향을 미치고 있음을 알 수 있었다.
건설공사에서 공정관리는 기본적으로 가장 중요한 단계이며, 효율적인 공정관리를 위해서는 합리적 공정표 작성이 우선시 되어야 한다. 설계단계에서는 기상조건과 현장 특성을 고려한 다양한 조건과 공법의 비교 검토를 통해 최적의 공사 기간을 산정할 수 있으나, 기획단계에서 기본적인 자료(D/B) 분석만으로는 효율적 공법 선정과 적정한 공사 기간 산정이 어렵다. 따라서, 기획단계에서 기존시가지의 공동구 건설시 표준공기 분석을 위하여, 본 논문에서는 공동구 형식을 개착식 및 터널식으로 구분하고, 각 형식의 특성과 기존시가지의 조건을 고려한 공법을 선정 하도록 하였다. 합리적인 공기 계산을 위하여 외부 공사에 영향을 주는 기상조건을 고려하여 년 간 가동율을 산정 하였으며, 개착식은 RC 공법/터널식은 Shield TBM 공법에 대한 단위공정을 분석하였다. 각 단위공정을 종합하여 연장 1,200m, 환기구 200m 간격으로 가정한 공사의 표준공기를 산정한바, 개착식은 893일, 터널식은 616일이 소요되는 것으로 분석 되었다. 본 연구의 결과는 기획단계에서 보다 쉽게 공동구 형식 선정과 표준공기 산정에 도움이 될 것이며, 추후 설계단계에 연계하면 공정 및 공사비 산정이 용이할 것으로 판단된다.
축류팬은 여러 산업분야에서 사용되며, 환기 및 제연을 목적으로 사용하는 송풍기의 핵심 요소이다. 유체 운동을 이용하는 축류팬의 연구는 공력성능에 대한 연구가 많이 진행되어 왔다. 본 연구 대상은 100마력의 송풍기에 사용되는 축류팬이며, 직경 1800 mm의 대형 송풍기이다. 송풍기의 축류팬은 블레이드, 허브, 허브 캡, 보스로 구성되어 있으며, 블레이드와 허브는 중요한 구성부품이다. 공력성능에 많은 영향을 미치는 블레이드에 대한 설계는 공력성능 예측 프로그램을 이용해 3차원 점 데이터를 추출하여 이를 3D 모델링 형상을 생성하게 된다. 중요 구성부품이 절삭가공을 이용해 가공하게 되면 제품의 수정이 용이하다. 하지만, 블레이드와 허브는 다이캐스팅이나 중력주조를 통해 제작하는 환경으로 인해 금형 제작 전에 구조안전에 대한 연구가 필요하게 되었다. 본 연구에서는 축류팬 정격운전속도와 그 이상의 운전속도에서 주요 구성부품에 대한 구조안전성에 대한 특성과 취약부위에 대한 해석결과는 최대응력과 안전계수를 통해 검증하고 설계시 반영된 여유간극은 블레이드의 회전과 다른 부품과의 간섭 여부를 확인하기 위해 변위 결과를 도출하여 축류팬의 구조안전성에 대해 검증하고자 한다.
Jong Eun Lee;Jinwoo Kim;Minhee Hwang;Yun-Hyeon Kim;Myung Jin Chung;Won Gi Jeong;Yeon Joo Jeong
Korean Journal of Radiology
/
제25권5호
/
pp.481-492
/
2024
Objective: To evaluate the clinical and imaging characteristics of SARS-CoV-2 breakthrough infection in hospitalized immunocompromised patients in comparison with immunocompetent patients. Materials and Methods: This retrospective study analyzed consecutive adult patients hospitalized for COVID-19 who received at least one dose of the SARS-CoV-2 vaccine at two academic medical centers between June 2021 and December 2022. Immunocompromised patients (with active solid organ cancer, active hematologic cancer, active immune-mediated inflammatory disease, status post solid organ transplantation, or acquired immune deficiency syndrome) were compared with immunocompetent patients. Multivariable logistic regression analysis was performed to evaluate the effect of immune status on severe clinical outcomes (in-hospital death, mechanical ventilation, or intensive care unit admission), severe radiologic pneumonia (≥ 25% of lung involvement), and typical CT pneumonia. Results: Of 2218 patients (mean age, 69.5 ± 16.1 years), 274 (12.4%), and 1944 (87.6%) were immunocompromised an immunocompetent, respectively. Patients with active solid organ cancer and patients status post solid organ transplantation had significantly higher risks for severe clinical outcomes (adjusted odds ratio = 1.58 [95% confidence interval {CI}, 1.01-2.47], P = 0.042; and 3.12 [95% CI, 1.47-6.60], P = 0.003, respectively). Patient status post solid organ transplantation and patients with active hematologic cancer were associated with increased risks for severe pneumonia based on chest radiographs (2.96 [95% CI, 1.54-5.67], P = 0.001; and 2.87 [95% CI, 1.50-5.49], P = 0.001, respectively) and for typical CT pneumonia (9.03 [95% CI, 2.49-32.66], P < 0.001; and 4.18 [95% CI, 1.70-10.25], P = 0.002, respectively). Conclusion: Immunocompromised patients with COVID-19 breakthrough infection showed an increased risk of severe clinical outcome, severe pneumonia based on chest radiographs, and typical CT pneumonia. In particular, patients status post solid organ transplantation was specifically found to be associated with a higher risk of all three outcomes than hospitalized immunocompetent patients.
In order to study the effect of welding fume exposure upon the pulmonary function test, we examined 131 shielded arc welding workers, and 152 $CO_2$ arc welding workers as cases and 177 control workers for their general characteristics, and forced vital capacity (FVC), forced expiratory volume in one second $(FEV_{1.0})$, forced expiratory volume in one second as a percent of FVC $(FEV_{1.0}%)$, and maximal mid-expiratory flow (MMF) were obtained from the spirogram. In shielded arc welding group and $CO_2$ arc welding group, FVC, $FEV_{1.0},\;FEV_{1.0}%$, and MMF were significantly decreased than control group, especially marked in the MMF finding. The distribution of workers below normal range was as follows. in the shielded arc welding group, 2 workers(1.5%) for FVC, 17 workers(13.0%) for $FEV_{1.0}$, 5 workers(3.8%) for $FEV_{1.0}%$, 28 workers(21.4%) for MMF, and in the $CO_2$ arc welding group, 3 workers(2.0%) for FVC, 25 workers(16.4%) for $FEV_{1.0}$, 8 workers(5.3%) for $FEV_{1.0}%$, and 37 workers(24.3%) for MMF, and significant increase by exposure duration was found in MMF. The distribution of workers who had ventilation impairment was as follows: 5 workers(3.8%) for obstructive type, 2 workers(1.5%) for restrictive type in the shielded arc welding group, and 7 workers(4.6%) for obstructive type, 2 workers(1.3%) for restrictive type, and 1 worker(0.6%) was combined type of the $CO_2$ arc welding group. In the respect of these results, the significant pulmonary function and ventilatory impairment were observed in welding fume exposed workers who had not abnormal finding in chest X-ray, and MMF considered as the most sensitive pulmonary function index by welding fume exposure. Therefore even if it is hard to doing pulmonary function test in the first health examination of workers according to the Industrial Safety Health Act in the welding fume exposure workers, it is desirable to consider doing PFT. Also evaluating the ventilation impairment, it is necessary, to observe the change of MMF that marker of effort-independent portion.
국내 중고교 엘리트 사이클 선수를 대상으로 점진부하 운동 시 유산소반응과 폐환기 반응을 분석하는데 목적을 두었다. 남자 사이클 선수($17{\pm}1$ 세, $175{\pm}5\;Cm$, $70{\pm}9\;kg$) 12명이 신체계측, 점진부하 운동 검사, 폐기능 검사에 참여하였다. 사이클 에르고미터를 이용한 점진부하 운동 중 이들의 최대산소섭취량($VO_2max$)과 최대파워 (Wmax), 환기량, 산소 및 이산화탄소호흡당량($V_E/VO_2$, $V_E/VCO_2$), 호흡율, 일회호흡량 등이 측정되었다. 호흡반응의 시간변인으로 흡기시간(Ti), 호기시간(Te), 일회호흡시간(Tb), 흡기의무사이클(Ti/Tb), 흡기율($V_T$/Ti)이 분석되었다. 폐기능으로는 폐활량, 일초호기량, 일초율, 최대호기량 등이 측정되었다. 선수들은 최대운동시 $57.5{\pm}3.9\;ml{\cdot}kg^{-1}{\cdot}min^{-1}$의 $VO_2max$, $194.1{\pm}8.6\;beat{\cdot}min^{-1}$의 최대심박수를 보였으며, Wmax 는 평균 452 W에 도달하였다. $VO_2max$은 신체계측 변인들과 상관관계를 보이지 않았다. 대부분의 환기반응은 운동강도가 점차적으로 증가하면서 동반 증가하였다. 운동강도의 증가와 함께 Ti, Te, Tb는 감소하였으며, Ti/Tb는 대략적으로 일정하게 유지되었다. 250 W 이하에서 신장, 체중, 신체질량지수, 체표면적은 $V_T$/Ti 그리고 Ti/Tb 와 높은 상관관계를 나타냈다(p<0.05). 결과적으로, 엘리트 사이클 선수들의 최대유산소능력은 성인에 비해 낮은 것으로 보이며, 이는 성인과 호흡조절 양상이 다른 것으로 추정된다. 신체계측 변인은 $VO_2max$와 상관성이 존재하지 않았다. 호흡반응의 시간 변인은 운동강도 250 W 이하에서만 체격과 연관성을 가지는 것으로 보인다. 흡기율은 어린 선수들의 운동지속시간과 연관 있어 보이지만, 흡기의무사이클은 성인과 유사한 것으로 보인다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.