• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.7
• /
• pp.439-444
• /
• 2012

We studied the characteristics of odor emitted from 40 swine facilities across the country under various conditions like rearing densities, management style, ventilation system and swine manure handling characteristics, based on the olfactory and analytical evaluation. Odor concentrations (D/T) measured from swine facilities were respectively an average 4,055 D/T at liquid manure storage tanks on aeration, an average 913 D/T at slurry manure storage, an average 506 D/T at finishing swine facilities and an average 201 D/T at composting facilities. The higher rearing densities and slurry accumulation volume in finishing swine house, the more odor concentration (D/T) was increased. But The odor concentration (D/T) in finishing swine house did not show significant difference according to application of microbial additives. 9 odor compounds ($NH_3$, $H_2S$, MM, DMS, DMDS, PA, n-BA, n-VA, i-VA) were detected at swine facilities and the main odor compounds were volatile sulfur compounds such as $H_2S$, MM and volatile fatty acids compounds such as n-BA, n-VA, i-VA. 97.5% of swine farms surveyed in this study is located within 300 m of residential area and it is easy to bring odor complaints.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1528-1534
• /
• 2013

This paper proposes the optimal design of stator shape for cogging torque reduction of single-phase brushless DC (BLDC) motor with asymmetric notch. This method applied size and position of asymmetric notches to tapered teeth of stator for single-phase BLDC motor. Which affects the variation of the residual flux density of the permanent magnet. The process of optimal design included the extraction of the sampling point by using Latin Hypercube Sampling(LHS), and involved the creation of an approximation model by using kriging method. Also, the optimum point of the design variables were discovered by using the Genetic Algorithm(GA). Finite element analysis was used to calculate the characteristics analysis and cogging torque. As a result of finite element analysis, cogging torque were reduced approximately 39.2% lower than initial model. Also experimental result were approximately 38.5% lower than initial model. The period and magnitude of the cogging torque were similar to the results of FEA.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.264-272
• /
• 2011

Shipbuilders carry out the operation test to check the conditions of the main propulsion system and auxiliaries for moored vessel in the quoy before the sea trial. The estimation of the thrust and torque for the partially submerged propeller should be prepared to ensure the safety of mooring line and the ship. In this paper, the variations of the thrust and torque according to the shaft submergence and the propeller rotating speed in bollard pull condition are investigated with the model test and the numerical analysis. Based on these resaearch, the empirical formula representing the physical phenomena of the partially submerged propeller is derived and validated through comparison to measurement results of full-scale propellers under the quoy operation test.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.4
• /
• pp.217-225
• /
• 2016

The purpose of the study was to initially investigate the concentration patterns of $PM_1$, $PM_{2.5}$ and $PM_{10}$ in the Seoul subway lines, and then to figure out the PM behaviors of internal and external sources inside subway tunnels. The PMs were monitored by a light scattering real-time monitor during winter (Jan. 8-26 in 2015) and summer (July 2-Aug. 7 in 2015) in tunnel air, in passenger cabin air, and in the ambient air. The daily average $PM_{10}$, $PM_{2.5}$, and $PM_1$ concentrations on these object lines were $101.3{\pm}38.4$, $81.5{\pm}30.2$, and $59.7{\pm}19.9{\mu}g/m^3$, respectively. On an average, the PM concentration was about 1.2 times higher in winter than in summer and about 1.5 times higher in underground tunnel sections than in ground sections. In this study, we also calculated extensively the average PM mass ratios for $PM_{2.5}/PM_{10}$, $PM_1/PM_{10}$, and $PM_1/PM_{2.5}$; for example, the range of $PM_{2.5}/PM_{10}$ ratio in tunnel air was 0.82-0.86 in underground tunnel air, while that was 0.48-0.68 in outdoor ground air. The ratio was much higher in tunnel air than in outdoor air and was always higher in summer than in winter in case of outdoor air. It seemed from the results that the in/out air quality as well as a proper amount of subway ventilation must be significant influence factors in terms of fine PM management and control for the tunnel air quality improvement.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.3
• /
• pp.347-358
• /
• 2018

Objectives: The purpose of this study is to identify the association between oral health status and pulmonary ventilatory defects. Methods: The 6th (2013-2015) National Health and Nutrition Examination Survey data was used. The study subjects were those aged 40-79 who had pulmonary function examination. Complex samples general linear model analysis, Complex samples cross-tabulation analysis, and Complex samples logistic regression analysis were conducted. Results: In terms of restrictive ventilatory defects, the study subjects (8.3%) who recognized that their oral health status was bad outnumbered those who recognized that their oral health status was good (6.1%) (p<0.05). Many of the study subjects who experienced difficulty in biting, chewing and/or speech, and who had an unhealthy periodontal had restrictive ventilatory defects and obstructive ventilatory defects (p<0.05). The association between oral health status and pulmonary ventilatory defects was analyzed. The findings showed that those who had unhealthy periodontal had a 1.33 times higher probability of pulmonary ventilatory defects than those who had a healthy periodontal (p<0.05). After taking into account general characteristics (age, sex, incomes, education, and smoking) of the subjects, the association between oral health status and pulmonary ventilatory defects was analyzed. The result found that only in cases where one experienced dental caries was an association with pulmonary ventilatory defects found. In other words, those who had dental caries showed a 0.73 times higher probability of pulmonary ventilatory defects than those who had no dental caries (p<0.05). Conclusions: Based on the findings of this research, oral health status was found to be associated with pulmonary ventilatory defects. To improve oral health, it is necessary to provide life-cycle stages based oral health education. Therefore, it is required to develop an oral health education program and develop a national oral health policy.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.24-32
• /
• 2007

Conductive rubber material was molded in a belt shape to measure respiration. Its resistivity was approximately $0.03{\;}{\Omega}m$ and the resistance-displacement relationship showed a negative exponent. The temperature coefficient was approximately $0.006{\;}k{\Omega}/^{\circ}C$ negligible when practically applied on the abdomen. The conductive rubber belt was applied on a normal male's abdomen with the dimensional change measured during resting breathing. The abdominal signal was differentiated ($F_{m}$) and compared with the accurate standard air flow rate signal ($F_{s}$) obtained by pneumotachometry. $F_{m}$ and $F_{s}$ differed in waveform, but the start and end timings of each breaths were clearly synchronized, demonstrating that the respiratory frequency could be accurately estimated before further processing of $F_{m}$. $F_{m}-F_{s}$ loop showed a nonlinear hysteresis within each breath period, thus 6 piecewise linear approximation was performed, leading to a mean relative error of 14 %. This error level was relatively large for clinical application, though customized calibration seemed feasible for monitoring general variation of ventilation. The present technique would be of convenient and practical application as a new wearable respiratory transducer.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.1
• /
• pp.97-105
• /
• 2008

An IPA model was used to evaluate customer service encounters at a large food court; also the gaps between importance and performance from were also evaluated from both perspectives. The findings of this study will be applied in order to improve service quality at various large food service operations. A total of 298 customers from a large shopping mall food court completed the study questionnaire, asking them to evaluate the important and performance attributes of service. Seven underlying dimensions were identified and labeled by factor analysis: factor 1 was "safety": factor 2 "time": factor 3 "atmosphere": factor 4 "quality of food": factor 5 "menu attributes": factor 6 "comfort": and the last and seventh factor was "comprehension". As a result of IPA analysis the overall mean scores between the importance attributes and performance attributes showed significant differences by independent t-tests(p<0.001). Quadrant I was classified with unnecessary items including interior design, proper lighting, suitable chairs, and proper room temperature. In quadrant II thirteen variables showed high scores for both importance and performance, such as various menu choices, hygienic food, dishes, chairs, food court, kitchen, and employees; proper ventilation, employee kindness, waiting time to order, and received food; automatic system for ordering-serving. Quadrant III included eight variables identified as low priority, including appearance of food, nutrient content of food, proper portions, new menu, proper music, proper location of cashier, services for children and efficiency of movement. In quadrant IV six variables were included as areas to focus management's efforts, such as food taste, proper food temperature, use of safe food materials, maintenance of food quality, existence of preferred foods, and proper food prices. These results suggest that food court customers have interests that are distinct from restaurant customers and may need to be treated differently. It is anticipated that this data will be useful to the foodservice industry in order to segment customer characteristics by different dinning behaviors.

• Land and Housing Review
• /
• v.6 no.4
• /
• pp.231-237
• /
• 2015

Recently, It has been much interest in modular housing construction. so, The purpose of this study was to investigate the characteristics of the indoor air quality in modular mock-up housing. We measured indoor air quality(formaldehyde, benzene, toluene, ethylbenzene, xylene, styrene) of two modular mock-up units that built-in furniture is installed and uninstalled. As a result, the pollutants of built-in furniture installed unit were emitted more than built-in furniture uninstalled unit. But after bake-out and ventilation, emission concentrations of two modular mock-up units were similar and were below Indoor Air Quality recommendation standards. Built-in furniture is likely to affect the emission concentration of toluene

• Korean Institute of Interior Design Journal
• /
• no.11
• /
• pp.45-56
• /
• 1997

In the process of modermization the problem of environment destruction has become a worldwide issue. And now this problem is a concern for all branches of science, including that of architectural desigv. This thesis tries to find the meaning of ecological architectural space, one that encreases the organic relationship, and communication, between architectrual space and urban environmental space, between human beings and architecture, and between human beings and their environment. As an example, we will take a look at the architectural space-design of Frei Otto, who offers diverse creative ecological architectural forms. His concept of architecture has the critical character when compared with the traditionan conventional concept of architecture. The ecological characteristics of his architectural spacedesign can be summarized as follows: The first characteristic is his ample use of natural objects in the architectural structure. An ample use of living things like trees and plants as well as of inanimate thing like water, wind as architectural elements enhances the functional efficiency of architecture. The second characteristic is its ecological architectural system, which saves energy faciliates ventilation by changing the position and direction of the building, by systematically applying the materials, and by efficiently arranging the inner space. The third characteristic is the dematerialization of architecture and the use of materials that are economical and appropriate for the circulation system of nature. The use of natural elements and recycling natural objects, makes it possible to reuse materials of the destroyed building. In short, the ecological architecture of Frei Otto, which shows the relation between human beings and architecture, presents diverse possibilities of the archtectural space as a complex natural system, which is more than a simple combination of separatge elements.

• Atmosphere
• /
• v.17 no.4
• /
• pp.407-420
• /
• 2007

Optical characteristics of aerosols in Seoul are investigated from the measurements of sky radiance by Skyradiometer at Yonsei University from December 2005 to November 2006. Aerosol optical depth (AOD) shows a maximum in June due to weak ventilation and particle growth by aging process and hygroscopic effect. Single scattering albedo (SSA) and Angstrom Exponent (AE) show the lowest value in spring due to the Asian dust. It is clear that coarse mode is dominant in spring and fine mode is dominant in summer from the volume size distribution measured in this study. The explanations on the changes of aerosol loadings are provided through the correlation between AOD and AE, while the pattern of wavelength dependency related to particle size is shown through the correlation between SSA and AE. Backward trajectory analysis by HYSPLIT provides information about origin of aerosol, which allows us to classify the case according to the source region and the path distance. Although the direction of backward trajectory traces back mostly to west, coarse mode particle is dominant in the case of long pathway and fine mode particle is dominant in the case of short pathway. This discrepancy is caused by the regional difference of emitted particles.