• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.473-493
• /
• 2019

5G vehicular communication is one of key enablers in next generation intelligent transportation system (ITS), that require ultra-reliable and low latency communication (URLLC). To meet this requirement, a new hybrid vehicular network structure which supports both centralized network structure and distributed structure is proposed in this paper. Based on the proposed network structure, a new vehicular network utility model considering the latency and reliability in vehicular networks is developed based on Euclidean norm theory. Building on the Pareto improvement theory in economics, a vehicular network uplink optimization algorithm is proposed to optimize the uplink utility of vehicles on the roads. Simulation results show that the proposed scheme can significantly improve the uplink vehicular network utility in vehicular networks to meet the URLLC requirements.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.111-116
• /
• 2012

Vehicular communication is one of main convergence technologies which combines information and communication technology (ICT) with vehicle and road industries. In general, vehicular communication adopts IEEE 802.11p standard which is commonly referred as wireless access in vehicular environments (WAVE). In this paper, we investigate a multi-hop communication scheme for IEEE 802.11p based communication systems which support both vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communications. First, we briefly overview the performance of IEEE 802.11p based communication systems. Then, a multi-hop communication scheme is introduced for both broadcast and unicast. The performance of proposed scheme is presented via experimental measurements.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1229-1234
• /
• 2012

Vehicular communications have been receiving much attention in intelligent transport systems (ITS) by combining communication technology with automobile industries. In general, vehicular communications can be used for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments (WAVE). WAVE system transmits signal in 5.9GHz frequency band with orthogonal frequency division multiplexing (OFDM) signaling. In this paper, we consider physical layer issues in vehicular communications. We first overview the physical (PHY) layer of WAVE standard and properties of 5.9GHz signals, and then physical layer issues to provide reliable communication link are discussed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1057-1062
• /
• 2014

Vehicular communications can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In this paper, we represent measurement results of radio characteristics of vehicular communications using IEEE 802.11p based system in urban environments. Radio characteristics are based on the packet error rate (PER) and received spectrum mask. Using measurement results, we discuss implementation issues of vehicular communication systems for supporting reliable services.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1589-1594
• /
• 2013

Vehicular communication is one of representative convergence technology which combines information technology and vehicle industry. Wireless Access in Vehicular Environments (WAVE) technology is vehicular communication standard which is widely used in the world. In this paper, we introduce service realization of WAVE based vehicular communication systems in the practical testbed. We review the overall WAVE based systems in brief and introduce the testbed. Then, we investigate various applications using vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications. Based on realization of systems, we discuss practical implementation issues and the convergence area of WAVE systems.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.207-216
• /
• 2013

Vehicular ad-hoc networks (VANETs) are self-organizing, self-healing networks which provide wireless communication among vehicular and roadside devices. Applications in such networks can take advantage of the use of simultaneous connections, thereby maximizing the throughput and lowering latency. In order to take advantage of all radio interfaces of the vehicle and to provide good quality of service for vehicular applications, we developed a seamless flow mobility management architecture based on vehicular network application classes with network-based mobility management. Our goal is to minimize the time of flow connection exchange in order to comply with the minimum requirements of vehicular application classes, as well as to maximize their throughput. Network simulator (NS-3) simulations were performed to analyse the behaviour of our architecture by comparing it with other three scenarios. As a result of this work, we observed that the proposed architecture presented a low handover time, with lower packet loss and lower delay.

• Journal of KIISE:Information Networking
• /
• v.37 no.1
• /
• pp.66-71
• /
• 2010

This paper proposes mobility management schemes providing Internet session continuity to moving vehicles in the V2I (Vehicle-to-Infrastructure) environment of the vehicular communication networks. Since PMIPv6 is localized mobility management protocol, PMIPv6 can not be directly applied to the vehicular communication network requiring global mobility coverage. Therefore, in this paper, we derive two scenarios of applying PMIPv6 to vehicular communication network environment and propose PMIPv6-based global mobility management schemes for those scenarios. Through simulations, we show that the proposed schemes can significantly decrease the Internet service discontinuity.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.243-250
• /
• 2010

Vehicular communication networking is one of the most important building blocks of Intelligent Transportation System (ITS). The vehicular communication network is a wireless communication system enabling vehicles to communicate with each other as well as with roadside base stations. Mobility management of vehicles which move at high speeds and occasionally make a long journey is an interesting research area of vehicular communication networks. Recently, The Proxy Mobile IPv6 (PMIPv6) protocol is proposed for network-based mobility management to reduce the overhead of mobile nodes. PMIPv6 shifts the burden of the mobility management from mobile nodes to network agents to decrease the overhead and latency for the mobility management. In this paper, we derive the scenario of deploying PMIPv6 in vehicular communication networks and propose a new LMA handover mechanism for realizing the scenario. By carrying out the ns-2 based simulations, we verify the operability of the proposed mechanism.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.183-189
• /
• 2018

With the recent advancement of vehicle wireless communication technology, many vehicular clouds have been proposed. The existing research focused on cloud services through data collection based on vehicular networks of mobile V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In this paper, we present a vehicular datacenter model that utilizes the vehicle in the parking space as a resource for the datacenter. Also, we derive resource allocation strategy based on the expected execution time considering the leave rate of each vehicle in our vehicular datacenter model. Simulation results show that our proposed resource allocation strategies outperform the existing strategy in terms of mean execution time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.62-65
• /
• 2018

This paper comes out with the study on sensing data collection strategy in a Software-Defined Mobile Edge vehicular networking. The two cooperative data dissemination are Direct Vehicular cloud mode and edge cell trajectory prediction decision mode. In direct vehicular cloud, the vehicle observe its neighboring vehicles and sets up vehicular cloud for cooperative sensing data collection, the data collection output can be transmitted from vehicles participating in the cooperative sensing data collection computation to the vehicle on which the sensing data collection request originate through V2V communication. The vehicle on which computation originate will reassemble the computation out-put and send to the closest RSU. The SDMEVN (Software Defined Mobile Edge Vehicular Network) Controller determines how much effort the sensing data collection request requires and calculates the number of RSUs required to support coverage of one RSU to the other. We set up a simulation scenario based on realistic traffic and communication features and demonstrate the scalability of the proposed solution.