• Journal of Communications and Networks
• /
• 제15권2호
• /
• pp.173-178
• /
• 2013

It is a concern that eco-driving vehicles, because their driving behavior differs from other vehicles due to e.g. e-start, may inhibit smooth traffic flow. Therefore, it is necessary to study the cooperative eco-driving done by a vehicle group, putting "vehicle-to-vehicle communication" and "road-to-vehicle communication" into perspective. Based on these factors, this study aimed to: 1) Analyze fuel consumption rates and driving behaviors of more than one vehicle following an Eco-Driving vehicle. 2) Examine the effect of information on the fuel consumption rate of the preceding vehicles on the following vehicles. As a result, the following findings were obtained: 1) By providing information to multiple following vehicles, the fuel consumption rate of the second vehicle was not lowered, while that of the third one was. 2) It is possible that, when information on fuel consumption of a preceding vehicle is provided to the following one, an inter-vehicular distance is shortened during deceleration to contribute to smooth traffic flow. From the above results, it is suggested that, when targeting a vehicle group, sharing the information on preceding vehicles is effective.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1448-1453
• /
• 2015

In this paper, we propose an alternative method of communication to improve the reliability of in-vehicle networks by jointly using wireless communication networks. Wired Communication networks have been used in vehicles for the monitoring and the control of vehicle motion, however, the disconnection of wires or hardware fault of networks may cause a critical problem in vehicles. If the network manager detects a disconnection or faults in wired in-vehicle network like the Controller Area Network(CAN), it can redirect the communication path from the wired to the wireless communication like the Zigbee network. To show the validity and the effectiveness of the proposed in-vehicle network architecture, we implement the Electronic Stability Control(ESC) system as ECU-In-the-Loop Simulation(EILS) and verify that the control performance can be kept well even if some hardware faults like disconnection of wires occur.

• 디지털산업정보학회논문지
• /
• 제14권1호
• /
• pp.15-25
• /
• 2018

ISO/IEC 15118 is a standard for communications and services for electric vehicle charging infrastructure. Although this standard deals only with data communication between an electric vehicle and a charge station, communication with the outside is essential for establishing an authentication system for vehicle certification and V2G service for electric power transmission. In this study, it was designed to verify the information of electric car charging infrastructure in electric power system through communication link between ISO/IEC 15118 electric vehicle model and IEC 61850 standard MMS protocol. This is demonstrated in the field so that the electric vehicle communication data is linked with the micro grid management system. This could be used as an element technology in other distributed power sources as well as electric cars in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2690-2692
• /
• 2005

CAN communication can minimize the interfacing lines between equipments because it is composed of only the input and output lines, also is used for automatic system including vehicle, aircraft, railway vehicles and robot because the reliability of data is high by the capability of data-related error detect and correcting function. It can also improve the low-reliable and inefficient system which is composed of the existing Wiring Harness(W/H), so in case of vehicle, it is used in place of the present ECU as the new electro-control unit. In this paper, we constructed the electro-control unit of vehicle by using CAN communication and implemented system that could monitor the condition of vehicle through the web or mobile by connecting the electro-control unit to imbedded system. Such a system is expected to be helpful to the intelligent vehicle and the adoption of ACC(Adaptive Cruise Control).

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.969-976
• /
• 2003

A remote control strategy for vehicles in Intelligent Vehicle Highway System (IVHS) is considered. An optimal scheduling of a limited communication channel is proposed for lead vehicle control in a platoon. The optimal scheduling problem is to find the optimal communication sequence that minimizes the cost obtained inherently by an optimal control without the communication constraint. In this paper, the PID control law which guarantees the string stability is used for the lead vehicle control. The fact that the PID control law is equivalent to the approximately linear quadratic tracker allows to obtain the performance measure to find an optimal sequence. Simulations are conducted with five maneuvering platoons to evaluate the optimality of the obtained sequence.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.67-74
• /
• 2009

본 연구에서는 임베디드 시스템과 지그비(Zigbee) 무선통신을 기반으로 지능형 자동차를 위한 모니터링 및 제어가 가능한 임베디드 웹서버를 구축하였다. 자동차의 모든 정보를 담고있는 ECU(Electronic Control Unit)에 주제어기와 임베디드 시스템을 인터페이스 시켜 자동차의 운행정보를 모니터링하고, 자동차의 내, 외부에 추가된 센서신호는 지그비 통신을 이용해 임베디드 시스템에 전달하도록 하였다. 임베디드 시스템을 이용해 웹서버를 구축했기 때문에 개인용 컴퓨터 및 모바일 기기를 이용하여 차량에 접속할 수 있으며, 자동차의 상태를 실시간 감지하고 제어할 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.117-125
• /
• 2012

최근 자동차 시장은 기존의 기계 위주의 기술에서 차량 정보화 및 전자화 기술로 빠르게 패러다임 변화가 이루어지고 있다. 특히, 텔레매틱스 분야는 자동차 제조사 및 이동통신 업체 간의 긴밀한 협조체제를 구축하여 차량 정보화 서비스를 위한 기술 개발을 가속화하고 있다. 그러나 텔레매틱스 서비스는 기지국과 차량, 차량 대 차량 간에 무선통신에 의해 정보교환이 이루어지고 있으므로 전파 간섭에 의한 서비스 품질의 저하를 피할 수 없다. 이에 본 논문에서는 무선통신기반의 차량 네트워크 환경에서 차량과 무선 통신 상호간 간섭을 분석할 수 있는 장비를 설계 구현하고, 시뮬레이션과 실제 차량의 실측실험을 통하여 차량 내 외부에 발생하는 간섭을 감소시켜 통신 품질을 높일 수 있는 방법을 제시한다.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.16-22
• /
• 2023

This paper presents a proactive longitudinal motion planning algorithm for improving the safety of an automated bus. Since the field of view (FOV) of the autonomous vehicle was limited depending on onboard sensors' performance and surrounding environments, it was necessary to implement vehicle-to-vehicle (V2V) communication for overcoming the limitation. After a virtual V2V-equipped target was constructed considering information obtained from V2V communication, the reference motion of the ego vehicle was determined by considering the state of both the V2V-equipped target and the sensor-detected target. Model predictive control (MPC) was implemented to calculate the optimal motion considering the reference motion and the chance constraint, which was deduced from manual driving data. The improvement in driving safety was confirmed through vehicle tests along actual urban roads.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.554-559
• /
• 2010

Recently, various in-vehicle networks have been developed respectively in order to accomplish their own purpose such as CAN and MOST. Various electronic devices for vehicle are controllable by the advent of networks attached to the vehicle. However, the networks also come with a variety of unique features in each network-specific communication which creates difficulty using and supporting the interoperable services among the networks. To solve this problem, each network needs a standard integration framework. In this paper, a framework is proposed and implemented. It consists of a standard protocol using XML to improve compatibility and portability. The framework makes each network interoperable by applying unique information and messages of the network in the XML standard document. The results obtained by implementation show that the framework supports the efficient communication of data between heterogeneous invehicle networks.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2527-2534
• /
• 2010

최근차량내의 각 네트워크 간 통신 및 확장을 위한 표준 형식의 필요성이 대두되고 있다. 그 이유는 차량은 다양한 차량 네트워크로 구성되지만 각 네트워크는 고유의 프로토콜을 사용하므로 네트워크간의 호환이 어렵기 때문이다. 그리고 이기종 차량 네트워크 간 다양한 서비스 제공이 어렵다. 이 논문에서는 차량 네트워크 기반 지능형 서비스 제공을 위한 XML 스키마를 표준 프로토콜을 기반으로 설계하여 이기종 차량 네트워크 간 메시지의 호환성 및 확장성을 만족시킨다. 그리고 XML 빌드 도구 및 파서 도구를 구현하여 기존 차량 네트워크 기반 메시지가 지능형 서비스에 원활히 대응될 수 있음을 보여주었다.