• Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.179-190
• /
• 2016

A kind of modified epoxy resin sheet molding compounds of the impeller has been designed. Through the test, the non-metal impeller has a better environmental aging performance, but must do the waterproof processing design. In order to improve the stability of the impeller vibration design, the influence of uncertainty factors is considered, and a multi-objective robust optimization method is proposed to reduce the weight of the impeller. Firstly, based on the fluid-structure interaction, the analysis model of the impeller vibration is constructed. Secondly, the optimal approximate model of the impeller is constructed by using the Latin hypercube and radial basis function, and the fitting and optimization accuracy of the approximate model is improved by increasing the sample points. Finally, the micro multi-objective genetic algorithm is applied to the robust optimization of approximate model, and the Monte Carlo simulation and Sobol sampling techniques are used for reliability analysis. By comparing the results of the deterministic, different sigma levels and different materials, the multi-objective optimization of the SMC molding impeller can meet the requirements of engineering stability and lightweight. And the effectiveness of the proposed multi-objective robust optimization method is verified by the error analysis. After the SMC molding and the robust optimization of the impeller, the optimized rate reached 42.5%, which greatly improved the economic benefit, and greatly reduce the vibration of the ventilation system.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.467-473
• /
• 2017

In this paper, impact characteristics of a water entry gliding vehicle were analyzed using a finite element method. To guarantee the validity of analysis results, a convergence test was performed for several ratios of Euler and Largrange mesh sizes. The impact coefficient was calculated with respect to entry angles and angle of attacks. It can be observed that the impact coefficient was large at a high cross-section gradient and was also affected by cavitation. This study could be useful in the preliminary design stage of a water entry bomb development.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.243-251
• /
• 1993

With the recent issuance of a dynamic side impact test regulation in the Federal Motor Vehicle Safety Standard in the United States of America, many aspects of occupant protection in side impact crashes have been under investigation. Many investigations of real world accidents, crash test results and simulation studies have established that in side impact crashes of passenger cars, thoracic and pelvic injuries of occupant are, large part, caused by occupants' impact against the interior side of the vehicle, primarily the door. This paper is concerned with the development of a lumped mass computer model, which simulates the interaction of a struck car door and an adjacent seated occupant in side impacr, based CTP code which has been successfully used in vehicle and occupant simulation. New model developments include elimination of influence of vehicle side structure stiffness in the occupant injury responses. The model was used to investigated the effect of various door padding characteristics on occupant responses to improve vehicle safety performance. The evaluation of different crush properties of door padding have also focused to understand of behavior of impacted occupant. Results from simulations, The effects of both material coefficients $C_{f}$ and p were illustrated in terms of occupant injury criteria TTI and pelvis.

• Interaction and multiscale mechanics
• /
• 제5권2호
• /
• pp.145-155
• /
• 2012

The thin-plate structure and the box-beam structure are two typical welded structures in railway vehicles. Because of their structure complexity, bigger size and multi-seams, welding residual distortion which occur in welding process bring unfavorable effect on the quality of welding products manufacturing and service. As a result, welding distortion forecasting and control become an important and urgent research topic in railway vehicles. In this paper, three different numerical methods are presented corresponding to three typical types of welded structures of railway vehicles and welding deformation are simulated. Consistence of numerical results and experimental data proves the correctness of models and feasibility of simulation methods.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.720-728
• /
• 2012

It is important for identification of noise and vibration problem of tire to consider influence of interaction between road and tire. A quantification of road noise is a challenging issue in vehicle NVH due to extremely complicated transfer paths of road noise as well as the difficulty in an experimental identification of input force from tire-road interaction. A noise caused by tire is divided into road noise(structure-borne noise) and pattern noise(air-borne noise). Pattern noise is caused by pattern shape of tire, which has larger than 500 Hz, but road noise is generated by the interactions between a tire and a vehicle body. In this paper, we define the quantitative analysis for road noise caused by interactions between tire and road parameters. For the identification of road noise, the chassis dynamometer that is equipped $10mm{\times}10mm $ square cleat in the semi-anechoic chamber is used, and the tire spindle forces are measured by load cell. The vibro-acoustic transfer function between ear position and wheel center was measured by the vibro-acoustic reciprocity method. In this study three tires with different type of mechanical are used for the experiment work.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 학술발표집 지반진동 영향평가
• /
• pp.73-82
• /
• 1993

Ground-borne vibration is one of the main causes of environmental impact from subway systems. The vibration resulting from track-train interaction is transuutted through the tunnel structure and the surrounding ground to adjacent buildings. This paper provides a summary of proposed noise and vibration criteria, a review of the ground vibration propagation mechanism and the theoretical isolation effectivenesss of each of the following underground transit systems : track, tunnel and vehicle itself.

• 터널과지하공간
• /
• 제9권3호
• /
• pp.185-193
• /
• 1999

본 연구에서는 2개 터널의 교차부에 설치된 교량에 이동차량하중이 작용될 때 동적해석결과를 제시하였다. 이와 같은 터널내에 위치한 교량은 매우 회귀한 사례로서 구조물의 동적특성은 통상적인 것으로 가정할 수 없을 것이다. 본 연구에서 조사한 교량은 서울 남산1호터널과 남산2호터널의 교차부에 설치된 철근콘크리트교이다. 교차부는 강구조물로된 가시설구조물에 의해 지지되며 이는 2호터널내의 라이닝이 교체되는 기간 동안에 설치될 것이다. 동적해석은 범용유한요소해석 프로그램인 SAP2000을 이용하였다. 이때 구조물, 터널의 라이닝 그리고 주변 암반은 3차원입체요소에 의해 표현되었으며 터널에서 방사되는 탄성파에너지를 모의하기 위하여 외부경계에 점성감쇠장치를 설치하였다. 주행속도에 따른 몇 가지 차량형태를 해석에서 고려하였다. 차량하중을 포함한 유한요소모델은 계측된 속도와 계산된 최대질점속도를 비교하여 검증되었다. 해석으로부터 이 교량에 대한 충격계수는 0.21로 추정되었다. 그러므로 이와 같은 교량구조물의 설계시 충격계수는 설계시방서에서 정한 상한값을 사용할 경우 안전측일 것으로 판단되었다.

• 대한기계학회논문집B
• /
• 제37권5호
• /
• pp.449-457
• /
• 2013

본 논문에서는 FSI(Fluid-Structure Interaction)기법을 이용하여 인체 회전의 영향을 고려한 혈류와 혈관벽의 거동을 이해하기 위한 수치해석을 수행하였다. 혈관은 협착률이 50%이고 편심이 없는 형상이며 인체 회전 효과를 묘사하기 위하여 혈관 주축에 대해 2 ~ 6 rps 의 회전을 가하였다. 협착과 축 회전의 영향으로 나선형, 비대칭 유동이 강체와 FSI 모델에서 모두 나타났다. 그러나 FSI 모델에서 혈관벽 움직임의 영향으로 혈류의 주기적, 과도적 차이가 발생했다. 특히 혈관 내 경화반의 진전과 경화반 위험성을 나타내는 대표적인 인자로 알려진 유동 재순환 영역이 감소하였다. 혈관벽의 움직임은 협착과 회전효과와 마찬가지로 유동 재순환 영역의 생성에 영향을 미친다.

• Ocean Systems Engineering
• /
• 제1권1호
• /
• pp.17-28
• /
• 2011

The purpose of this paper is to demonstrate the efficacy of modeling a surface effect ship's air-cushion flexible seal utilizing a two-dimensional beam under steady state conditions. This effort is the initial phase of developing a more complex three-dimensional model of the air-seal-water fluid-structure interaction. The beam model incorporates the seal flexural rigidity and mass with large deformations while assuming linear elastic material response. The hydrodynamic pressure is derived utilizing the OpenFOAM computational fluid dynamic (CFD) solver for a given set of steady-state flow condition. The pressure distribution derived by the CFD solver is compared with the pressure required to deform the seal beam model. The air pressure, flow conditions and seal geometry are obtained from experimental analysis. The experimental data was derived from large-scale experimental tests utilizing a test apparatus of a canonical surface effect ship's flexible seal in a towing tank over a variety of test conditions.

• 한국지반공학회논문집
• /
• 제31권9호
• /
• pp.29-38
• /
• 2015

이 연구에서는 열차가 교량 접속부를 통과하면서 발생되는 동적상호작용 문제를 유한요소해석프로그램을 이용하여 검토하였다. 해석대상구간에서의 궤도틀림조건은 부등침하량을 삼각함수를 이용하여 이상화하고, 철도공사 선로 보수기준을 만족하는 최대 궤도틀림 한계치를 해석조건으로 설정하였다. 해석대상이 되는 접속부 구조물의 체결장치 아래 부분은 모두 3차원 입체요소로 모형화하였으며, 해석비용을 줄이기 위하여 1/2 궤도부분만을 모형화하였다. 경계조건은 평면변형률상태에 준하는 것으로 차량-궤도 동적상호작용해석을 수행하였다. 국내 콘크리트궤도용 표준 접속부에서의 궤도틀림에 따른 열차 주행시 동적상호작용해석을 수행하여 윤중감소율과 차체수직진동가속도를 살펴보았으며, 접속부의 시멘트 안정처리골재, 일반골재, 일반토사구간에서의 발생된 최대 Mises응력으로 동적거동을 평가하였다.