• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.361-366
• /
• 2016

In this paper, we propose a technique for drowsiness detection using the histogram and edge information of eyes. The drowsiness of vehicle drivers is the main cause of many vehicle accidents. Therefore, the checking of eye images in order to detect the drowsiness status of a driver is very important for preventing accidents. In our suggested method, we analyze the changes of the histograms and edges of eye region images, which are acquired using a CCD camera. The experimental results show that our proposed method enhances the accuracy of detecting drowsiness to nearly 99%, and can be used for preventing vehicle accidents caused by the driver's drowsiness.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.183-189
• /
• 2014

A recent trend of 'Smart Technology' has changed the simple and normal car into smart vehicle. Smart vehicle has a complex aspects of technologies and Wireless Access in Vehicular Environment (WAVE) is the technology that is mentioned for the communication infrastructure of Smart Vehicle. The current status about WAVE in Korea, however, is not good to be used in smart vehicular communication. The reason for that is that the frequency band for WAVE is not assigned or allocated in Korea. In this paper, we will explore the current status of technology standard for WAVE and investigate the way of frequency allocation for WAVE with the survey analysis from the smart vehicle industry.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.259-266
• /
• 2005

In this paper, we developed a vehicle condition monitoring system that checks vehicle conditions, and transmits and displays them to a driver for safety and effective maintenance. We used a CAN controller and transceiver to establish the CAN communication that has been used commonly inside an actual vehicle for the collection of vehicle's status information. To validate the operation of the developed system, we have confirmed the accuracy and stability of data transmission and reception of vehicle information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.378-381
• /
• 2000

A lot of convenient services have been recently developed under favor of rapid development of information technology and Internet The vehicle control technology which services the real-tine tracking of the location and status of the vehicles has been studied mainly by some pioneers such as research institute and company. Now the vehicle control technology is in a practical stage. The postal business is now going to change the processing architecture so that they are trying to archive two goals : (1) more efficient postal management, (2) more fast and safe delivery for mail. However there are not only many items which should be considered in order to do, but also problems which stem from the innate characteristics of postal business. In this paper, we introduce the current postal business architecture as well as the vehicle control technology. We also suggest not only the effectiveness of the vehicle technology in postal business, but also some important face what one should be taken into account about it.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.16-24
• /
• 2013

Some GM (General Motors) vehicles are using a GMLAN (General Motors Local Area Network) communication protocol for control and diagnostics. The airbag control module uses vehicle speed information from the GMLAN to record the vehicle speed as pre-crash information. In order to use the vehicle speed information for crash reconstruction purposes, it helps to be able to understand the accuracy of the data. The actual vehicle speed is not expected to be the same as the GMLAN indicated speed in some situations like a spin or if there is hard braking. This paper compares the actual vehicle speed and vehicle speed information during specific vehicle maneuvers. Actual vehicle speed is calculated from a GPS sensor, while GMLAN vehicle speed is calculated from transmission output sensor by the Engine control module (ECM). Vehicle maneuvers defined as Mode #1, Mode #2, Mode #3. The Mode #1 maneuver simulates wheel lock-up and skidding f by hard-braking at a specific speed. The Mode #2 maneuver simulates a 90degree turn using a J-turn maneuver at a specific speed. The Mode#3 maneuver simulates a 180 degree turn using a spin type of maneuver at a specific speed. The study then compares the GMLAN speed and GPS speed to see what speed difference exists between them. The results of this paper are applicable to GM vehicles only. This paper catalogs the performance and limitations of two vehicles as useful reference for crash reconstructions where there is a need to understand the speed indicated in the pre-crash section of the SDM data.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.317-324
• /
• 2016

This paper proposes a message transfer application using smartphone with NFC(Near Field Communication) and GCM(Goolge Cloud Messaging) technology for prevention of personal information leakage. In implementing for the proposed system, we design a NFC-based vehicle status alerts service which make it possible to communicate with smartpone message without phone-number between a car driver and an unspecified person. The application provides message communication mechanism without exposing the real phone number, using the NFC tag written with the driver's smartphone device ID and GCM push messages. Through the evaluation result of the actual implemented application, the proposed system can be efficient technology in protection for leakage of personal information such as personal phone- number in daily life.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.343-346
• /
• 2012

Today, According to it widely used that third generation mobile networks service, WCDMA module development technology and its utilization is expanding increasingly and thus to IT Convergence industries is a trend that a lot of appears. This paper, OBD-II communications to bring a vehicle information use and data to an external server transfer and it was developed that vehicle status monitoring from other external devices can be system. From the various sensors inside a vehicle using the OBD-II connector read the information, after converting the user easier to see, WCDMA module using the car status monitoring system to transfer to an external data server was implemented. Developed to test the performance of the system using virtual's state vehicle simulator, which occurs in the real car that will generate the data. It was sent to the OBD-II connector to be occurred data, vehicle status monitoring system was confirmed that Data was received without error. In addition, When this data using WCDMA transmit data to an external server the same data was confirmed that it was received without error. In the future, this technology using the OBD-II vehicle IT convergence technology can be used in a wide range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.541-548
• /
• 2012

On this paper, we proposed a design rule of charger monitoring system which allow us to watch the charging status and verify it for building the electric chargers infrastructure by spread of electric vehicle. Gathering the charging status of battery by proposed system makes us to enhance the charging algorithm, to interface with BMS(Battery Management System) of electric vehicle, to control the charging process with users. Because the technology of rapid charging is dependant upon various factors such as a performance and stability of battery. We proposed the monitoring system of rapid charger based on CAN protocol that can watch a working status of rapid charger including the charging status of battery with real time and can reduce the charging time of battery with optimized status. We also implement it and evaluate its performance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.4
• /
• pp.80-95
• /
• 2019

Recently, with the development of sensor and communication technology, researchers at home and abroad have actively conducted research on methodologies for determining maintenance through diagnosis and prediction techniques by collecting information on the status of equipment or systems. Based on the status of vehicle parts at this point in time, this study presented a system framework for making maintenance decisions by predicting the change in vehicle part status to a future date based on the current state of vehicle parts. In addition, condition diagnosis and predictive data adjustment was configured through tracking the status of vehicle parts before and after maintenance activities. We hope that the application of the results of this study will contribute a little to the safety of citizens using public buses and to the activation of the condition-based maintenance system of vehicles.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.906-911
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent contorl system to be wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steening, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR (Infrared) modem. Epecially it is possible to easily network to use not an exclusive controller of AGV but