• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.256-260
• /
• 2005

For the structure of AVLS is required to the GPS-MDT for realtime acquisition the position reporting of vehicle and traffic management S/W. It is necessary that the MODEM using VHF transceiver base on GPS and monitoring program for display base on GIS the traffic status by vehicles position report in management system. The other wise, vehicles among management system that is required the automatic communications protocol for GPS information and mobile's ID. In this paper have studied the VHF modem for transmission the voice and data at same time and S/W for management system using GIS-tool.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.31-39
• /
• 2014

In KSLV-I launch mission, real-time data from the tracking stations are acquired, processed and distributed by the Mission Control System to the user group who needed to monitor processed data for safety and flight monitoring purposes. The processed trajectory data by the mission control system is sent to each tracking system for target designation in case of tracking failure. Also, the processed data are used for decision making for flight termination when anomalies occur during flight of the launch vehicle. In this paper, we propose the processing mechanism of slaving data which plays a key role of launch vehicle tracking mission. The best position data is selected by predefined logic and current status after every available position data are acquired and pre-processed. And, the slaving data is distributed to each tracking stations through time delay is compensated by extrapolation. For the accurate processing, operation timing of every procesing modules are triggered by time-tick signal(25ms period) which is driven from UTC(Universial Time Coordinates) time. To evaluate the proposed method, we compared slaving data to the position data which received by tracking radar. The experiments show the average difference value is below 0.01 degree.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.179-187
• /
• 2014

As an Accident data recorder (ADR) is a system to record a vehicle's status and dynamics information on the before and after of accident, Traffic accident investigation agencies and parts developers have a lot of interest to analyze an accident objectively and develop automotive safety devices by using real accident data, This study is to analyze an accident objectively and scientifically on the basis of traffic accident reconstruction with the use of output data of an event data recorder. This study is conducted double lane change test six times and slalom test one time as a field driving test and simulation. Based on the vehicle speed, the longitudinal and transverse acceleration, steering angle, driving path, and other kinds of information obtained from the field driving test, this study performed a simulation with PC-Crash program of reenacting and analyzing a traffic accident. The simulation was performed twice in the acceleration-steering angle input method and in the acceleration-driving path input method. By comparing the result of the field driving test with the results of the two simulations, we drew an analysis method with the optimal path reconstruction.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.1
• /
• pp.35-48
• /
• 2023

In this study, we introduced the development status and the government policy of the Chinese automobile industry under the rapidly changing global economic environment. We conducted a consumer trend survey on automobile purchases by consumers in China. Despite the Chinese government's strong national emission control policy and stricter standards for manufacturing and selling internal combustion engine vehicles, 59.6% of respondents saying they would choose an internal combustion engine vehicle when purchasing a vehicle in the future for various reasons. It was confirmed that there is a significant gap between government policies and consumer perceptions. In addition, we have discovered the recent declining trend of automobile sales in China, and used the monthly sales volume from January 2010 to December 2020 as training set, and the sales volume from January 2021 to November 2022 as a test set. We proposed and evaluated a time-series model for predicting future automobile demand in China. Then, we showed the monthly sales forecast for 2023 when each model was applied.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.6
• /
• pp.583-591
• /
• 2015

In order to evaluate the performance of TAS applied to the hybrid vehicle of the soft belt driven, acceleration performance and fuel consumption performance is to be superior to the existing vehicle. The key components of belt driven TAS(Torque Assist System), such as the engine, the motor and the battery, The key components of the driven belt TAS, such as the engine, the motor, and the battery, have a significant impact on fuel consumption performance of the vehicle. Therefore, in order to improve the efficiency at the point of view based on the overall system, the study of the power distribution algorithm for controlling the main source powers is necessary. In this paper, we propose the power distribution algorithm, applied the homogeneous analysis method in terms of fuel equivalent, for minimizing the fuel consumption. We have confirmed that the proposed algorithm is contribute to improving the fuel consumption performance satisfied the constraints considering the vehicle status information and the required power through the control parameters to minimize the fuel consumption of the engine. The optimization process of the proposed driving strategy can reduce the trial and error in the research and development process and monitor the characteristics of the control parameter quickly and accurately. Therefore, it can be utilized as a way to derive the operational strategy to minimize the fuel consumption.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.31-39
• /
• 2020

According to lessons learned from an accident of Fukushima Daiichi nuclear power plant, it is advisable to make a comprehensive radiation survey by the accident phase for efficient response and risk management using diverse survey platforms. This study focuses on the technical status of environmental radiation monitoring using a UAV (Unmanned aerial vehicle) and the performance test of developed aerial survey system based on two detectors with an high energy resolution through the field application to contaminated areas. Finally, the performance of aerial survey at diverse flight heights was successfully achieved by introducing the correction factor to represent the results into ambient dose rate at 1m above the ground.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.12
• /
• pp.653-662
• /
• 2016

This paper describes a test case generation algorithm for Simulink/Stateflow models based on the Rapidly exploring Random Tree (RRT) algorithm that has been successfully applied to path finding. An important factor influencing the performance of the RRT algorithm is the metric used for calculating the distance between the nodes in the RRT space. Since a test case for a Simulink/Stateflow (SL/SF) model is an input sequence to check a specific condition (called a test target in this paper) at a specific status of the model, it is necessary to drive the model to the status before checking the condition. A status maps to a node of the RRT. It is usually necessary to check various conditions at a specific status. For example, when the specific status represents an SL/SF model state from which multiple transitions are made, we must check multiple conditions to measure the transition coverage. We propose a unique distance calculation metric, based on the observation that the test targets are gathered around some specific status such as an SL/SF state, named key nodes in this paper. The proposed metric increases the probability that an RRT is extended from key nodes by imposing penalties to non-key nodes. A test case generation algorithm utilizing the proposed metric is proposed. Three models of Electrical Control Units (ECUs) embedded in a commercial vehicle are used for the performance evaluation. The performances are evaluated in terms of penalties and compared with those of the algorithm using a typical RRT algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.85-87
• /
• 2012

This paper, UAVs of the secondary communication link that applies to the analysys of time-division communication system and communication method proposed algorithm has been developed. UAVs of the important characteristics of the data link latency and throughput, the frequency is availability, weight. The data needed to operate UAVs vehicle control data, status data, there is an acquisition. Control and data acquisition will require real-time communication. Based on the requirements being applied to the secondary communication link communication method were compared and analyzed. The results of analysis of ground-base TDD method is suitable.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.115-126
• /
• 2018

A new urban paradigm that moves from a vehicle-centric to pedestrian-centric culture should be considered to improve the quality of the pedestrian environments for women, children, senior citizens, and disabled persons as well as to promote community unification by providing general movement rights to everyone. This study was implemented to provide decent alternatives to improve street spaces. The street spaces around the Commercial and Residential Area No.1 located in the Administrative-Centered City, Sejong Special Autonomic City, were selected to analyze and define the status of the walkways and the street spaces. Satellite imagery and numerical maps were used to collect geographic data. Practical and actual surveys for the selected sites were performed to analyze the street status and the pedestrian status. Based on the all collected data, analysis results, and literature reviews, the questionnaire was made, and 315 inquiries qualified for analysis. The physical status of all four study sites was the highest level, Grade A, and green open spaces were relatively sufficient. As a result, the factors obtained from the factor analysis have an impact on the satisfaction of the pedestrian streets in the commercial area. The factors are as followed Design > Convenience > Roadside trees and rest areas > Safety > Safety protective facilities > Transportation and information facilities > Continuity > Basic state of road surfaces > Comfortability, and in the residential area: Transportation and information facilities > Basic state of road surfaces > Comfort > Convenience > Continuity > Design > Illumination and crime prevention facilities > Safety > Roadside trees and rest areas.

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.139-147
• /
• 2011

There is a growing tendency toward a vehicle demand and a utilization of traffic information systems. Due to various kinds of traffic information systems and increasing of communication data, the traffic information service requires a very high IT infrastructure. A cloud computing environment is an essential approach for reducing a IT infrastructure cost. And the traffic information service needs a provisioning scheduling method for managing a resource. So we propose a provisioning scheduling with conditional probability inference (PSCPI) for the traffic information service on cloud environment. PSCPI uses a naive bayse inference technique based on a status of a virtual machine. And PSCPI allocates a job to the virtual machines on the basis of an availability of each virtual machine. Naive bayse based PSCPI provides a high throughput and an high availability of virtual machines for real-time traffic information services.