• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.147-154
• /
• 2013

PURPOSES: To analyze the specific factors of drivers behaviors that amount of cause the greenhouse gas emissions per vehicle. METHODS: Drivers behaviors at intersections are analyzed on the conditions of acceleration and deceleration. RESULTS : First, it is resulted greenhouse gas emissions per vehicle is produced more at intersections than at the main lines of highway. Second, it is resulted that the average speed, the average acceleration rate and the maximum speed are three major factors to produce greenhouse gas per vehicle in acceleration sections. Third, it is resulted that rapid deceleration 20m before entering intersections is the major factor to produce greenhouse gas per vehicle in deceleration sections. CONCLUSIONS: At intersections, sudden acceleration and deceleration is not good for greenhouse gas emissions. Thus, and the average speed, the average acceleration rate and the maximum speed are the chosen as factors to be controlled for drivers' behavior to reduce vehicles' greenhouse gas at intersections.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1587-1591
• /
• 2009

Safety of railroad is result of reliability which is received from test & evaluation of system. Railroad system is consisted of various sub system such as vehicle, supply of electric power, signal, communication, rail track construction, operation. To secure safety of railroad, evaluation about parts, assembly, sub system, whole system etc.. that compose railroad is essential. In this paper, I wish to describe for results that analyze korean tilting vehicle's derailment coefficient developed by national research achievement. Result that evaluation korean tilting vehicle's running safety, verified that secure even if speed-up 30 km/h than operating speed of present in curved track.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.443-446
• /
• 2002

A vehicle oversteered or cornering at excessive speed leaves tire yaw mark on the road surface. A yaw mark is a sign that the tire was sideslipping and exceeded its frictional limit because of centrifugal force. Problems exist with the traditional equation, “critical speed formula (CSF)”, that limits its practical use in traffic accident reconstruction. A major problem is that the equation dose not account for vehicle dynamics and interface between tire and road. The literature refers to that the accuracy of the critical speed formula varies with several factors. New equations that account for vehicle dynamics are introduced in this paper. A comparison of the accuracy of the new method and the traditional method in the calculation of speed is conducted.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.993-1001
• /
• 2007

An analysis model has been developed to assess running safety of railway vehicle passing curves. By using ADAMS/Rail, a computer analysis has been conducted by changing various parameters according to the track conditions. Analysis results show as follows: A derailment coefficient of left wheel was increased according to increase of cant at low speed, while it was decreased as increase of cant at high speed. A unload rate of left wheel was also increased according to increase of cant at low speed, while it was decreased as increase of cant at high speed. A wear number of left wheel was increased according to increase of cant at all speed, but only at 35 m/s, it was decreased as increase of cant. A friction coefficient of left wheel was Increased according to increase of cant at all speed, but only at 35 m/s. it was decreased as increase of cant.

• 산업기술연구
• /
• 제30권A호
• /
• pp.31-35
• /
• 2010

In this paper, a speed estimation method at coasting operation in an induction motor speed sensorless control for railway vehicle traction systems is presented. At coasting operation, there is no information obtaining rotor speed since all switches of an inverter are turned off. The inverter frequency should be synchronized with the rotor frequency for repowering at coasting condition. The proposed method injects DC current to the induction motor during a short time, then the flux angle and rotor speed needed for control can be estimated rapidly.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.58-64
• /
• 2007

As the concerns regarding global worming were increased, the pressure of greenhouse gas(GHG) emission reduction on mobile source was also increased. Carbon dioxides contribute over 90% of total GHG emission and the mobile source occupies about 20% of this $CO_2$ emission. Therefore automotive exhaust is suspected to be one of the major reasons of the rapid increase in greenhouse effect gases in ambient air. In this study, in order to investigate $CO_2$ emission characteristics from gasoline passenger cars(PC), which is the most dominant vehicle type in Korea, 106 vehicles were tested on the chassis dynamometer. $CO_2$ emissions and fuel efficiency were measured. The emission characteristics by displacement, gross vehicle weight, vehicle speed and CVS-75/vehicle speed mode were discussed. Test modes were vehicle speed modes and CVS-75 mode that have been used to develop emission factors and to regulate for light-duty vehicle in Korea. It was found that $CO_2$ emissions showed higher large displacement, heavy gross vehicle weight, low vehicle speed and CVS-75 mode than small displacement, light gross vehicle weight, high vehicle speed and vehicle speed mode, respectively. From these results, correlation between $CO_2$ emission and fuel efficiency was also determined. The results of this study will contribute to domestic greenhouse gas emissions calculation and making the national policy for climate change.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.593-596
• /
• 2018

The speed of vehicles has remained a significant factor that influences the severity of accidents and traffic accident rate in many parts of the world including South Korea. This behavior where drivers drive at speeds which exceed a posted safe threshold is known as 'speeding'. Over the past twenty years, the Korean National Police Agency (NPA) has become aware of an increased frequency of drivers who are speeding. Therefore, fixed-type ASE systems [1] have been installed on hazardous road sections of many highways. These system monitor vehicle speeds using a camera. However, the use of ASE systems has changed the behavior of the drivers. Specifically, drivers reduce speed or avoid the route where the cameras are mounted. It is not practical to install cameras at every possible location. Therefore, it is challenging to thoroughly explore the location where speeding occurs. In view of these problems, the author of this paper designed and implemented a prototype visualization system in which point and color are used to show vehicle location and associated over-speed information. All of this information was used to create a comprehensive visualization application to show information about vehicle driving. In this paper, we present an approach detecting vehicles moving at speeds which exceed a threshold and visualizing the points those violations occur on a map. This was done using vehicle trajectory data collected in Daegu city. We propose steps for exploring the data collected from those sensors. The resulting mapping has two layers. The first layer contains the dynamic vehicle trajectory data. The second underlying layer contains the static road networks. This allows comparing the speed of vehicles on roads with the known maximum safe speed of those roads, and presents the results with a visualization tool. We also compared data about people who drive over threshold safe speeds on each road on days and weekends based on vehicle trajectories. Finally, our study suggests improved times and locations where law enforcement should use monitoring with speed cameras, and where they should be stricter with traffic law enforcement. We learned that people will drive over the speed limit at midnight more than 1.9 times as often when compared with rush hour traffic at 8 o'clock in the morning, and 4.5 times as often when compared with traffic at 7 o'clock in the evening. Our study can benefit the government by helping them select better locations for installation of speed cameras. This would ultimately reduce police labor in traffic speed enforcement, and also has the potential to improve traffic safety in Daegu city.

• 대한토목학회논문집
• /
• 제30권1D호
• /
• pp.1-10
• /
• 2010

고속도로 영업소의 경우 하이패스차량과 일반TCS이용차량간의 혼용 및 차로변경으로 인한 상충이 발생하는 구간으로 안전성에 대한 검토가 필요한 구간이다. 본 연구에서는 영업소 진출부에 설치된 중앙하이패스 이용차량과 일반차로 이용차량간의 상충 및 사고위험성을 현장비디오촬영 및 상충분석을 통해 알아보았다. 차량속도와 상대속도 및 상충으로 인한 차량 감속시간 등을 분석한 결과 하이패스이용차량과 일반TCS이용차량간의 상대속도가 클수록 상충으로 인한 차량 급감속이 발생한다는 문제점을 파악하였으며, 중앙 하이패스 설치시 상충 발생 위치 및 차로 운영형태에 따라 상충빈도 및 상대속도가 다름을 확인할 수 있었다. TA(Time to Accident)분석 결과, 고속도로 영업소 중앙 하이패스 설치시 차량간 상대속도, 상충위치 및 빈도에 따른 상충시 하이패스 차량의 급감속 및 감속시간이 큼에 따라 사고위험이 높은 것으로 분석되었다. 또한 합류 시점부가 영업소 진출부와 가까울수록 TA분석값이 낮은 것으로 분석되어 전반적으로 속도차이를 줄여 안전성을 증대시켜야 함을 알 수 있었다. 본 연구에서는 영업소 진출부 중앙 하이패스 설치로 발생하는 상대속도차에 의한 상충으로 급감속 및 사고를 억제함으로서 영업소 중앙 하이패스 차로 설치시 안전성을 높여줄 수 있을 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.528-535
• /
• 2011

According to railway safety regulations for securing the railway vehicle's quality and performance, it can be partly exempted that the performance tests and production inspections on the railway vehicles which are produced and assembled for the purpose of test and research. The reasons of this exemption are for ensuring maximum autonomy and for saving time considered the development period of railway vehicle. However, it was continuously demanded the necessity of supplementation on the confirmation about railway vehicle's quality & performance. Therefore, we added "The monitoring step" which is for securing the quality and performance in high speed railway vehicle's subsystem & compartment to supplement those tests & inspections in development. In this paper, based on a standard ABS(Activity Breakdown Structure) of railway vehicle and a WBS(Work Breakdown Structure) of the railway vehicle system, we investigate the necessity of monitoring in the High speed railway vehicle development. And by comparing and analyzing the essential requirements of international standard, IRIS(International Railway Industry Standard) & TSI(Technical Specification for Interoperability), we try to examine a standard monitoring procedure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.49-52
• /
• 2004

High-speed trains with the maximum speed of 300 km/h have started revenue services since April 2004. A large portion of the 'Kyung-Bu' line is comprised of tunnels or bridges, which may cause excessive noise in a vehicle. The vibration generated by the trains propagates into the structure of the tunnel and the vehicle and it can be radiated as noise inside the vehicle interior. This noise can usually be heard as low frequency structure-borne noise. Measurement of the noise and vibration inside the KTX vehicle confirmed that the noise comprises of frequencies below 250 Hz with a couple of broad peaks.