• 오토저널
• /
• 제8권3호
• /
• pp.46-54
• /
• 1986

Driving pattern of gasoline passenger car was measured and analyzed at some areas(6urban area routes, 4 radial routes, 4 circular routes)in Seoul city. Measured items were vehicle speed, engine speed, intake manifold vacuum, and fuel consumption. Driving pattern data were reappearanced with engine dynamometer. Results of this investigation might be summarized as below; 1. When we compared urban area route with radial or circular route in rush hour, it was found that the average vehicle speed was measured to be lower about 25% and fuel consumption to be higher about 12% in urban area route. 2. Average vehicle speed was measured to be higher about 30% and driving resistance output to be higher about 25% in non-rush hour, but average fuel economy was increased a little. 3. On the bases of average fuel economy and characteristics of exhaust emissions, optimum driving vehicle speed was found about 60 km/h in the 4th(top)and about 40km/h in the 3rd in driving of experimental engine. 4. Idling frequency and exhaust emissions of CO,HC were related to idling closely. But exhaust emission of NOx, which had nothing to do with idling frequency, had relation to acceleration time ratio.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.402-408
• /
• 2021

기계 설계를 기반으로 제작한 자동차에 의한 사고 발생 시 차량 공학적인 분석은 심도 있게 조사하지 않고 조사자의 주관적인 경험 지식을 토대로 분석하는 경우가 있다. 본 연구는 실제 발생한 중앙선 침범 사고 자료를 토대로 캐드(CAD) 프로그램을 이용하여 현장 상황을 도면화하고, 도면화 한 자료를 시뮬레이션 프로그램(PC-Crash)에 적용하여 250번의 충돌 상황을 반복적으로 수행하여 최종 정지 위치 및 최종 정지 자세와 부합하는 충돌 속도, 진행 자세, 조향 작동 여부 및 제동 여부 등의 상관 관계를 분석했다. 충돌 속도가 낮을수록 이탈각의 영향을 크게 받지 않고 속도가 높은 차량의 속도에 영향을 크게 받고 충돌 이후에는 유효 충돌 속도와 같이 속도가 낮은 차량은 높아지고, 속도가 높은 차량은 낮아진다. 본 연구의 시뮬레이션 결과는 마이티가 중앙선을 넘은 자세로 오르막 좌커브 구간을 진행하다가 마주오던 포터를 인지하고 자기 진행 차로로 복귀하는 과정과 포터의 전면 좌측면이 충돌하여 포터가 우대각선 방향으로 밀려나 전면이 약 11시 방향을 향해 최종 정지하는 것을 규명하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.47-52
• /
• 1996

Interior noise, engine speed and vehicle speed are measured under road-load condition and interior noise signal is transformed by using the transient signal analysis methods such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise criteria such as the loudness, noisiness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running mode can be discussed in the viewpoint of noise quality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.871-873
• /
• 2001

The switched reluctance motor (SRM) is gaining much interest as a candidate for electric vehicle for its simple and rugged construction, ability of extremely high-speed operation. This paper is to design and investigate the capabilities of the SRM for low speed electric vehicle (LSEV).

• 소음진동
• /
• 제6권4호
• /
• pp.499-502
• /
• 1996

Interior noise, engine speed and vehicle speed are measured under transient road-load condition and interior noise signal is transformed by using the transient signal analysis methods, such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise metrics such as the loudness, sharpness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running modes can be discussed in the viewpoint of noise quality.

• 한국군사과학기술학회지
• /
• 제23권1호
• /
• pp.18-27
• /
• 2020

In order to estimate the launch point of a high-speed vehicle, predicting the various characteristics of the vehicle's movement, such as drag and thrust, must be preceded by the estimation. To predict the various parameters regarding the vehicle's characteristics, we build the IMM filter specialized in predicting the parameters of the post-launch phase based on flight dynamics. Then we estimate the launch point of the high-speed vehicle using Inverse Dynamics. In addition, we assume the arbitrary error level of the radar for accuracy of the prediction. We organize multiple-dimensioned IMM structures, and figure out the optimal value of parameters by comparing the various IMM structures. After deriving the optimal value of parameters, we verify the launch point estimation error under certain error level.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.25-32
• /
• 2013

차량이 곡선도로를 선회함에 있어 차량 내부적 요소인 차량의 진입속도, 차량에 작용하는 횡가속도, 전복과 관련된 롤 각, 그리고 외부적 요소인 노면과 타이어와의 마찰 및 도로의 구조는 중요한 요소이다. 본 연구에서는 교통사고 재현을 위한 PC-Crash프로그램을 이용하여 차량의 진입속도와 도로의 편경사, 노면상태에 따른 마찰계수를 변수로 두어 선회 시 차량의 상태변화를 분석하였다. 그 결과로, 곡선도로 선회시 한계속도 설정에 관해 도로구조와 노면상태에 따른 마찰계수가 중요한 요소가 된다는 것을 확인하였다.

• 자동차안전학회지
• /
• 제7권3호
• /
• pp.30-34
• /
• 2015

This study examined the Korean drivers' acceptance of SAS(Speed Assistance systems) and traffic sign conditions in Korea roads for SLIF(Speed Limit Information Function) that is a part of SAS. Exceeding the speed limit is a factor in the severity of many road accidents and SAS would help the driver to observe a speed limit by warning and/or effectively limiting the speed of the vehicle. SAS are in the initial phase in Korea, Korean drivers could not be familiar with automatical speed limiting during driving, SAS interface design would be considered to be more readily acceptable to the public. And advanced SAS have been introduced onto the market which are able to inform the driver of the current speed limit based on camera and/or digital maps based SLIF. These systems are based on external data using sensors, so environmental conditions are an important factor which could cause malfunction of SLIF functions.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.339-345
• /
• 2016

This paper presents a robust speed control of an autonomous vehicle using a disturbance observer. For the purpose, the transfer function of speed dynamics of an autonomous vehicle is identified using step response data. Based on the identified transfer function, model based PID (Proportional-Integral-Derivative) control is designed. In order to design a robust control against load variations on the vehicle, a disturbance observer (DOB) based control is devised. The performance of the designed DOB based control is demonstrated by real experiments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.25-29
• /
• 2010

Safety of railroad is result of reliability which is received from test & evaluation of system. Railroad system is consisted of various sub system such as vehicle, supply of electric power, signal, communication, rail track construction, operation. To secure safety of railroad, evaluation about parts, assembly, sub system, whole system etc.. that compose railroad is essential. In this paper, I wish to describe for results that analyze korean tilting vehicle's derailment coefficient developed by national research achievement. Confirmed that is possible even if speed up, curved line department running speed that estimate korean tilting vehicle's running safety in curved line track of Jungang Line about 20 km/h than present operating speed.