• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.30-37
• /
• 2014

The Electronic Toll Collection System based on Free-Flow Multi-Lane is needed to solve some yearly problems such as traffic congestion, safety accident, maintenance by hold-up of one way hi-pass system. The hi-pass communication system is first-in, first-out method in one way environment so, it can't handle various running patterns such as vehicle platoon, switching lane and passing in multi-lane environment. In this thesis we compared and analyzed the communication system of foreign countries ETCS operating system and domestic hi-pass communication system, then studied communication system which can run in multiple-way accepting existing hi-pass OBU. And we formed the communication system of Free-Flow Multi-Lane environment as a plan using incoherent of IR antenna and coherent of RF antenna. The communication system in Free-Flow Multi-Lane environment can be used not alone in parking garages but in expressways of ETCS and toll roads from now on.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.63-70
• /
• 2019

The number of vehicle-to-barrier collisions has increased due to improved driving environments. In addition, it is reported that the number of accidents led to impact severity larger than current capacity of a median barrier has increased. It is required to develop a high performance median barrier in order to secure expressway safety. This paper aims at proposing impact loading model and locations for a high performance median barrier based on analysis of median-barrier-related accident history. The SB6 test level (Impact severity: 420 kJ, Mass: 25 ton, Impact speed: 80 km/h, Impact angle: $15^{\circ}$) was suggested for target impact severity based on statistical data analysis. The suitable locations also were proposed from investigation of driver behaviors for installation and rehabilitation of high performance median barrier.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.299-307
• /
• 2018

Automatic announcement systems and emergency lights are necessary to prevent urban railway vehicles from accident, according to the emergency response guideline of domestic railroad. When emergency situation occurs, safety regulations and standards for urban railway vehicles specify that the emergency lights must be turn-on over 30 minutes as well as that the announcement should be provided by an attendant. However, as the current emergency systems use different units without a standard and system maintenance and management is not well performed, it is difficult to know the operation status. In this paper, modularized structures are given to standardize the emergency systems. The modularized structures analyzed from emergency scenarios of railway can substitute the existing broadcasting and lighting system. As a result, the optimized modular system considering cost and maintenance can be proposed by comparing all modularizations.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.25-31
• /
• 2021

Moving toward an aged society, traffic accidents involving elderly drivers have also attracted broader public attention. A rapid increase of senior involvement in crashes calls for developing appropriate crash-severity prediction models specific to senior drivers. In that regard, this study leverages machine learning (ML) algorithms so as to predict the severity of vehicle-pedestrian collisions induced by elderly drivers. Specifically, four ML algorithms (i.e., Logistic model, K-nearest Neighbor (KNN), Random Forest (RF), and Support Vector Machine (SVM)) have been developed and compared. Our results show that Logistic model and SVM have outperformed their rivals in terms of the overall prediction accuracy, while precision measure exhibits in favor of RF. We also clarify that driver education and technology development would be effective countermeasures against severity risks of senior driver-induced collisions. These allow us to support informed decision making for policymakers to enhance public safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.97-104
• /
• 2016

In Korea, the number of crash accident victims per 100,000 population is three times higher than the average of OECD. In particular, 60% of it occurs on the community road. Thus, this study intends to analyze the causes of such accidents through a pedestrian and vehicle traffic survey. The purpose is to establish practical safety enhancement measures for community roads. In recent years, lots of changes have occurred in the pedestrian environment. A traffic survey shows that 65% of pedestrians walk on the right and 17% of people use smart-phones while walking. An eye camera experiment shows that the operation load of drivers on the community roads is more than 4 times higher than those in urban roads. According to a speed survey, 62% of vehicles drive at 30km/h or above. The characteristics of accidents on community roads are as follows. First, the ratio of accidents on the edge of the road is 2.3 times as high as those on other roads. Second, when people walk on the right, the ratio of accidents is 2.5 times as high as that of walking on the left. Third, it becomes more dangerous when people cross the road from the right to the left. The majority of accidents is caused by unsafe driving (84.4%). When a vehicle makes a left turn, the likelihood of accidents is 2.3 times as high as those caused by a right turn. The ratio of accidents caused by vehicles going backwards is 14% among all accidents. In community roads, the focus of drivers should be at least 4 times higher than those on urban roads. Thus, walking in the opposite direction of vehicles and careless behaviors are highly likely lead to accidents.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.190-198
• /
• 2020

The development in smartphone technology has brought convenience to the life of the mankind, but an excessive use of smartphones sometimes causes various accidents. This research tried to propose an application service 'Smombie Safe Go' UI(User Interface) that allows the prevention of such accident while using smartphones when walking. For this, after research and user observations, produced walker journey maps and derived necessary main functions needed for safety, and the result showed that transparent interface, obstacle location alert, warning of dangers functions were necessary. To make the contents of the service more detailed, hazardous situations faced during smartphone use when walking were classified into 3 situations : 1. Obstacle appearing in front, 2. traffic lights on crosswalks 3. No traffic lights on crosswalks. Scenarios by hazardous situation were written, and the flow and UI of the app service that warns its users in each situation of hazards were designed. it is predicted that 'Smombie Safe Go' may be possible to be utilized as an app service that provides a safe walking experience for not only regular pedestrians but also the blind population.

• International Journal of Railway
• /
• v.1 no.4
• /
• pp.149-156
• /
• 2008

During maintenance or construction works in or at the tracks of railways, high risks for passengers and railway staff, especially for the workers on the construction site exist. The high risks result out of the movement of rail vehicles, like trains or construction vehicles, which must be faced by using any available technical and operational technologies for securing them against the environment. Therefore, it is necessary to evaluate the level of protection continuously and to identify new and innovative methods and technologies for the protection of the gang (construction worker, machines and material). Especially on construction sites at line sections with two or more parallel tracks but also with single tracks, there are still a lot of incidents and accidents mostly with seriously injured persons or fatalities. These were mainly gang members that breach the railway-loading gage. By using proper warning or protection systems, the avoidance of such accidents must be achieved. The latest developments. in gang protection systems concern on the one hand fixed barriers in the middle between the construction site and the operated track and on the other hand construction vehicles equipped with automatic warning systems. The disadvantage of such protection methods is that the gang can be warned against an approaching train but a monitoring of the gang members cannot be performed. Only one part of a potential dangerous situation will be detected. If the gang members will overhear the acoustic warning signal of the security staff and the workers will not leave the danger zone in the track, the driver of the approaching train had no chance to react to the dangerous situation. An accident is often inevitable. While the detection of acoustic warning signals by the gang members working on a construction site is very difficult, the acoustical planning of an automatic warning system has to be designed for an acoustic short range level of one meter besides the construction vehicle. The decision about the use of today's technical warning system (fixed systems, automatic warning systems, etc.) must be geared to the technical feasibility and the level of safety which is needed. Criteria for decision guidance to block a track should be developed by danger estimation and economical variables. To realize the actual jurisdiction and to minimize the hazards of railway operations by the use of construction vehicles near the tracks further developments are needed. This means, that the warning systems have to be enhanced to systems for protection, which monitor the realization of the warning signal as a precondition for giving a movement authority to a train. This method can protect against accidents caused by predictable wrongdoing. The actual state of the art technique of using a collective warning combined with additional security staff is no longer acceptable. Therefore, the Institute of Transportation System of the German Aerospace Center in Braunschweig (Germany) will develop a gang warning and protection system based upon imaging methods, with optical sensors such as video in visible and invisible ranges, radar, laser, and other. The advantage of such a system based on the possibility to monitor both the gang itself and the railway-loading gauge either of the parallel track or of the same track still in use. By monitoring both situations, the system will be able to generate a warning message for the approaching train, that there are obstacles in the track, so that the train can be stopped to prevent an accident. And also the gang workers will be warned, while they breach their area.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.1-12
• /
• 2007

Roads in Korea can be classified into four types according to their responsible authorities. For example, Motorway is constructed, managed, and operated by the Korea Highway Corporation. Ministry of Construction and Transportation is in charge of National Highway, and Province Roads are run by each province government. Urban/county Roads are run by corresponding local government. This study analyses the trends of road accidents for each road type. For this purpose, the numbers of accidents, fatalities, and injuries are compared for each road type for last 15 years. The result shows that Urban/County Roads are the most dangerous, while Motorways are the safest, when we simply compare the numbers of accidents, fatalities, and injuries. However, when we compare these numbers by dividing by total road length, National Highway becomes the most dangerous while Province Roads becomes the safest. In the case of road accidents, fatalities, and injuries per vehicle km, which is known as the most objective comparison measure, it turns out that National Highway is the most dangerous roads again. This study also developed time series models to estimate trends of fatalities for each road type. These models will be useful when we set up or evaluate targets of national road safety.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.47-56
• /
• 2022

The safe driving reward system aims to reduce the loss of life and property by reducing the occurrence of accidents by motivating safe driving and encouraging active participation by providing direct reward to vehicle drivers who have performed safe driving. In the case of the existing digital tachograph, the goal is to limit dangerous driving by recording the driving status of the vehicle whereas the safe driving reward system is a support measure to increase the effect of accident prevention and induces safe driving with financial reward when safe driving is performed. In other words, in an area where accidents due to speeding are high, direct reward is provided to motivate safe driving to prevent traffic accidents when safe driving instructions such as speed compliance, maintaining distance between vehicles, and driving in designated lanes are performed. Since these safe operation data and reward histories must be managed transparently and safely, the reward evidences and histories were constructed using the closed blockchain Hyperledger Fabric. However, while transparency and safety are guaranteed in the blockchain system, low data processing speed is a problem. In this study, the sequential block generation speed was as low as 10 TPS(transaction per second), and as a result of applying the acceleration function a high-performance network of 1,000 TPS or more was implemented.

• Composites Research
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2023

Although the development of transportation means has realized the right to mobility for the disabled who have difficulty in moving, it can be said that the improvement of the safety of passengers with disabilities that can occur in a car accident is lower than that of ordinary passenger seats. In particular, in the case of a rear-end collision that can occur suddenly, it is a reality that disabled passengers are vulnerable to head and neck injuries. Therefore, in this study, a multi-layer headrest foam that divides the headrest into three parts in the coronal plane was proposed to improve the head and neck injury index of disabled passengers in the vehicle in the event of a rear-end collision of a wheelchair transport vehicle. A range of stress scale factors was selected to give various compressive characteristics of the foam through low-speed rear-end collision analysis through a simple model, and GA optimization was performed by specifying the range as a parameter. Through the optimization result, the phase relationship between HIC and NIC was analyzed according to the compression characteristics of the layers. HIC responded most sensitively to the compression characteristics of the front layer and NIC responded to the compression characteristics of the mid layer, and the compression characteristics of the rear layer showed the lowest. A normal headrest and an optimized multi-layer headrest were placed in the validation model to analyze the low-speed rear-end collision sled test, and HIC and NIC were derived lower in the multi-layer headrest than in the general headrest. The compression behavior of the multi-layer headrest was also clearly shown, and it was verified that the multi-layer headrest was effective in improving the injury index of the head and neck compared to the general headrest.