• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.122-134
• /
• 2020

To improve traffic congestion, reduce fuel consumption, and improve the stability of truck operations, truck platooning, in which several trucks are organized in a single platoon, is being actively researched globally. Compared to the operation of a single truck, the operation of a truck platoon requires more caution before the actual operation because an accident of one vehicle in the platoon can lead to an accident with all the vehicles in the platoon. Therefore, this study examined the types of trucks and cargo suitable for truck platooning to prevent safety accidents. The review showed that a closed-van-type truck is appropriate for truck platooning to prevent falling objects during driving. In the case of cargo types, it is necessary to exclude liquids and dangerous goods defined in related laws from truck platooning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2078-2082
• /
• 2007

Recently, according to traffic accident statistics, traffic accidents occurring at night are as frequent as those during daytime, but their death rate is 1.5 times higher than that of daytime traffic accidents. This problem originates that the insufficient range of vision security of a driver causes the inappropriate accident confrontation. Therefore, in this paper, a microcontroller-based digital control method for the superior performance in headlight system is presented for optimal control that can adapt complex transient state, steady state and various environments. Specially in vehicles# headlight, its fundamental purpose is to implement the artificial headlight system which automatically controls the lighting patterns most adaptive to driving, road and weather conditions. Therefore we aimed at the development of headlight system, focused on the implementation of an artificial vehicle, of more advanced convenience and safety for drivers.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2017

This study investigated the causes and problems of train operation impediments through the statistics analysis of 8 years'internal data of Daejeon Metropolitan Express Transit. By evaluating the risks regarding the system, equipment, and parts of high risk group, this study measured the Risk Index Severity, and applied the $5{\times}5$ Risk Assessment Matrix which is a method of risk management to calculate the scale of risk to analyze the safety level and allowance range. As a result, the car sector, the most serious risk, followed by machinery and equipment sector showed that the inherent risk. In particular, the door broken and the door rail signaling and control devices due to defects of the vehicle is high, but also the severity, and frequency are showing very frequent additional potential accidents. PSD also had defects in the machinery sector appeared to be the most dangerous of the PSD poor safety gates, it was found that the glass also involve the risk of mishandling and breakage of the PSD. This study intended to contribute to the transportation benefits through the safety and stable operation of Metropolitan Express Transit.

• Journal of the Korea Convergence Society
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2013

This paper is the product development of environment and safety. In growing society, the bicycle is need to have a common goals for consumers convenience and theft prevention. The bicycle is movable means. But as times passed, that bicycle is strongly recommended to replace other vehicles because that is not produced to air pollution and energy(gas, diesel etc) insufficiency. As workers using a bicycle are increased, road for only bicycle is made by additionary. The bicycles happens to several moving accidents such as car accidents because of signal mismatch between bicycle users. However, using the development products of this paper, many accident problems for bicycle can be solved. As increasing of bicycles numbers, the high cost bicycles are too increased. So, the more theft of bicycle is also happened. The developed products(turn signal system and theft prevention system) through this study kept your bicycles from more convenience and more safe.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.163-170
• /
• 2000

Accident statistics shows that the portion of fatal occupant injuries due to side impacts is considerably high. The side impact usually leads to a severe intrusion of side structure into the passenger compartment. Furthermore, the safety zone for the side impact is relatively small compared to the front impact. Those kinds of physics for side impact frequently result in a fatal injury for the occupant. Therefore, NHTSA and EEVC are trying to intensify the regulation for the occupant protection against side impact. Both the regulation and recent market trends are asking for an installation of side airbag. There are several types of system configuration for side impact sensing. In this paper, we adopt the acceleration-based remote sensing method for the side airbag control system. We mainly focus on the development of hardware and crash discrimination algorithm of remote sensing unit. The crash discrimination algorithm needs fast decision of airbag firing especially for high-speed side impact such as FMVSS 214 and EEVC tests. It is also required to distinguish between low-speed fire and no-fire events. The algorithm should have a sufficient safety margin against any misuse situation such as hammer blow, door slam, etc. This paper introduces several firing criteria such as acceleration. velocity and energy criteria that use physical value proportional to crash severity. We have made a simulation program by using Matlab/Simulink to implement the proposed algorithm. We have conducted an algorithm calibration by using real crash data for 2,500cc vehicle. The crash performance obtained by the simulation was verified through a pulse injection method. It turned out that the results satisfied the system requirements well.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.69-83
• /
• 2009

According to the accident statistics of 2006, it can be recognized that drivers' characteristics and driving behaviors are the most causational factors on the traffic accidents. At present, many recording tools such as digital speedometer or black box are distributed in the market to meet social requests of decreasing traffic accidents and increasing safe driving behaviors. However, it is also true that the system preventing any possible vehicle accidents in advance has not been developed. In this study, we developed critical value for deciding dangerous driving behaviors. The developed critical value could be used to contribute to safety driving management systematization and safety driving behaviors.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.499-510
• /
• 2017

Traffic accident fatalities in Korea in 2016 was 4,292 and 1,732 cases were deaths of elderly people. In spite of this, the researches on behaviors of the elderly when crossing roads, are rather limited. The purpose of this study is to investigate and analyze road crossing behavior characteristics of the elderly, when crossing roads, especially focusing on the characteristics of pedestrians and vehicles. Cross-sectional data was collected from six different sites in two regions and the following results was identified. First, at road crossings, 528 cases(84.3%) out of 626 conflict situations of the elderly and 303 cases(63.3%) out of 478 conflict situations of the non-elderly pedestrians were found to be dangerous, respectively. The elderly tend to face a statistically significant risk of 3.11 times higher than that of non-elderly people. Second, 519 cases(82.9%) of jaywalking occurred in 626 conflict cases of the elderly and 375 cases(78.5%) of jaywalking in 478 conflict events of non-elderly persons, which indicates the elderly's 1.34 times higher trend compared with the non-elderly's. Third, the pedestrian safety margin (PSM) analysis showed that the PSM of the elderly and the non-elderly were 3.33 seconds and 4.04 seconds respectively, which is 17.5% high. Fourth, the difference in pedestrian safety interval was examined by dividing the speed of approaching vehicle into less than 30km/h, above 30km/h and less than 50km/h, and over 50km/h. There was no significant difference between the PSM of coming vehicles with the speed less than 30km/h and the PSM of approaching with the speed 30km/h~50km/h, but the conflicts with vehicle of the speed above 50km/h show significantly lower PSM than with vehicle speed of 30km/h~50km/h. Finally, when the risk threshold is set to less than 2.5 seconds, the analysis shows that older pedestrians tend to cross roads dangerously 1.59~2.53 times than younger pedestrians. The results set forth here can be used as a basis for constructing the elderly safety measures at present and a potential basis for autonomous vehicle safety application in the future for solving the issue of the difference in crossing behavior between elderly and non-elderly pedestrians.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.70-77
• /
• 2023

In response to climate change, each country is proposing a goal to reduce greenhouse gases in its energy supply and demand plan, and the use of hydrogen gas is a topic that is always prioritized as an energy resource for implementation. A popular way to use this hydrogen gas is the use of hydrogen fuel cell vehicles, and expansion of hydrogen charging stations is essential for using these hydrogen fuel cell vehicles. However, there are several limitations to the expansion of hydrogen refueling stations, the most representative of which is resident acceptance. Most of the hydrogen charging stations currently built in Korea are located in the outskirts with low population density, so the inconvenience to hydrogen fuel cell vehicle users has not been resolved, and as a result, there has been no progress in the spread of hydrogen fuel cell vehicles. In this paper, we analyzed the consequences of accident damage to determine the risks of constructing a hydrogen charging station on a railroad site frequently used by citizens. The target hydrogen charging station site was a railroad depot in Busan, and there are trains, national highways, and commercial facilities around this site. Assuming the worst-case scenario, we would like to consider the safety of the hydrogen refueling station site by analyzing the area affected by the accident and its consequence.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.115-136
• /
• 2008

The development of the aviation technology is beyond the people's imagination. For example, with some exaggeration, If the autopilot engage upon take off, You will realize that you are on the centerline of the foggy JFK runway 13R after 15 hours with only once or twice of intervention. But the more aviation technology develops, the more responsible the pilot will be who has the final authority of the aviation safety. In the JAL 706 accident caused by unidentified reason, the pilot increased pitch abruptly and overrode the control from the autopilot. The result of this process made the death of a flight attendant and some injuries of a few passengers. The district court found the pilot not guilty at the first trial on the ground that the control override was not connected to the possibility of foresight and avoidance of the human death. The pilot was proved to be innocent through the analysis of the DFDR and ADAS that the override did not precede the unidentified pitch up motion. The judicial precedent related to aviation accidents in Korea requires pilots' absolute and extended care compared to the ordinarily prudent or reasonably careful behaviors in the vehicle and medical accidents. Although there is some controversy about the standard care, the care required in the actual operation of high tech aircraft by a pilot should include objective and standard care and be judged by analysis of the scientific data. Although the pilot maintained the unusual hi speed that doesn't have safety margin and descended under turbulence in case of the JAL 706 accident, the court negatived its relation to the cause of pitch up. Also, the override of the control after initial pitch up might have caused the possibility of the death and injury, but the court denied it. Because of this complex cause of the aviation accidents, it is important for a court to figure out the core reason of the event and casual relationship with the pilot Now, It is required that the judgement of negligence in the aviation accidents should include an objective care with scientific data from simulated circumstances(or a simulator) as the Japanese court not from the theory of vehicle's negligence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.622-629
• /
• 2019

Recently, the government is taking new approaches to change the fact that the accident rate and accident death rate of the construction industry account for a high percentage of the whole industry. Especially, it is investing heavily in the development of construction technology that is fused with ICT technology in line with the current trend of the 4th Industrial Revolution. In order to cope with this situation, this paper proposed a concept to recognize and share the work situation information between the construction machine driver and the surrounding worker to enhance the safety in the place where construction machines are operated. In order to realize the part of the concept, we applied image processing technology using camera based on artificial intelligence to earth-moving work. Especially, we implemented an algorithm that can recognize the surrounding worker's circumstance and identify the risk situation through the experiment using the compaction equipment. and image processing algorithm based on YOLO-v3. This algorithm processes 15.06 frames per second in video and can recognize danger situation around construction machine with accuracy of 90.48%. We will contribute to the prevention of safety accidents at the construction site by utilizing this technology in the future.