• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.348-359
• /
• 2022

Interest in electric vehicle is on the rise due to global eco-friendly policies. To improve the efficiency of electric vehicles, it is essential to reduce weights of components. Since electric vehicles have various electronic equipment, the research on stray current corrosion is required. In this research, a galvanostatic corrosion experiment was performed on 6061-T6 Al alloy for electric vehicle battery housing using chloride concentration and applied current density as variables in a solution simulating an acid rain environment. As a result of the experiment, when chloride concentration and applied current density were increased, corrosion damage became larger. In particular, pitting damage was dominant at an applied current density of 0.1 mA/cm². Pitting damage over the entire surface was found at a current density of 1.0 mA/cm². In conclusion, chloride concentration had a relatively large effect on localized corrosion. The applied current density had a great effect on uniform corrosion. However, in the case of applied current density, localized corrosion was also greatly affected by interaction with chloride.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.66-78
• /
• 1995

In this paper, we address vehicle modeling and dynamic analysis of four wheel steering systems (4WS). 4WS is one of the devices used for the improvement of vehicle maneuverability and stability. All research done here is based on a production vehicle from a manufacturer. To study actual system response, a three dimensional, full vehicle model was created. In past research of this type, simple, two dimensional, bicycle vehicle models were typically used. First, we modelled and performed a dynamic analysis on a conventional two wheel steering(2WS) vehicle. The modeling and analysis for this model and subsequent 4WS vehicles were performed using ADAMS(Automatic Dynamic Analysis of Mechanical Systems) software. After the original vehicle model was verified with actual experiment results, the rear steering mechanism for the 4WS vehicle was modelled and the rear suspension was changed to McPherson-type forming a four wheel independent suspension system. Three different 4WS systems were analyzed. The first system applied a mechanical linkage between the front and rear steering mechanisms. The second and third systems used, simple control logic based on the speed and yaw rate of the vehicle. 4WS vehicle proved dynamic results through double lane change test.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제11권2호
• /
• pp.31-46
• /
• 2005

본 연구는 운전 중 발생하는 청각 자극의 유형 및 정도가 운전자가 지각하는 주관적 속도감에 어떠한 영향을 미치는지를 알아보고자 수행되었다. 본 연구에서 사용된 청각 자극은 엔진 소음과 음악 소리였으며 전자는 자동차의 속도에 따라 함께 변하는 청각 단서인 반면 후자는 자동차의 속도와는 무관하게 변화하는 비단서 소음으로 사용되었다. 엔진 소음의 강도만 조작되어 제시된 실험 1에서는 엔진 소음의 크기에 따라 운전자가 느끼는 주관적 속도감이 다르게 나타나 운전자들은 엔진 소음이 작을수록 기준속도보다 더 빨리 주행한 반면 엔진 소음이 클수록 더 천천히 주행하는 것이 관찰되었다. 실험 2에서는 엔진 소음과 음악 소리를 모두 들려주었는데, 그 결과 엔진 소음의 크기변화에 따른 주관적 속도감의 차이는 여전히 나타났으나 음악 소리의 크기변화에 따른 속도감의 차이는 보이지 않았다. 또한 실험 1과 2를 통합하여 음악 소리의 유무효과를 분석해 본 결과 음악 소리가 엔진 소음을 차폐시킬 만큼 크고 엔진 소음이 작을 경우에는 음악 소리가 없는 경우보다 속도를 더 내는 것으로 나타났다. 이는 음악 소리가 속도감에 영향을 주는 직접요인은 아니지만 간접적으로 영향을 미친다는 가능성을 시사한다.

• 한국지반공학회논문집
• /
• 제34권6호
• /
• pp.49-59
• /
• 2018

차량의 엔진성능에 따라 구동성능이 결정되는 도로주행차량과 달리, 포장되지 않은 지반 위를 주행하는 야지궤도차량의 구동성능은 지반-궤도 접지면에서 발생하는 지반의 전단 및 침하현상에 의해 제한된다. 특히 차량의 중량에 의해 발생하는 정적침하 및 슬립에 의해 유발되는 슬립침하는 지반-궤도 접지면에서 지반저항력을 발현시켜 야지궤도 차량의 구동을 직접적으로 방해하는 요소로 작용한다. 따라서 야지궤도차량의 구동성능을 확보하기 위해서는 정적침하 및 슬립침하를 평가하고 제한할 필요가 있다. 본 연구에서는 야지궤도차량의 중량 및 구동지반의 특성이 슬립침하에 미치는 영향을 종합적으로 평가하기 위하여, 다양한 연직하중 및 지반조건에서 모형궤도시험을 수행하였다. 모형 시험 결과, 모든 시험조건에 대해 슬립율이 증가할수록 슬립침하가 증가했지만, 그 증가량은 점차 감소하는 것으로 나타났다. 또한 궤도시스템에 재하 된 상부 연직하중이 크고 모형지반의 상대밀도가 작을수록 슬립침하가 커지며 이에 따라 지반저항력도 증가하는 것으로 평가되었다. 추가적으로, 평가된 슬립침하를 각 시험조건 별로 산정된 정적침하로 정규화 시킨 뒤 이를 슬립율에 관한 함수로 나타내어 야지궤도차량의 침하량 및 지반저항력 산정 시 활용 가능하도록 하였다.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.374-379
• /
• 2017

In vehicle to pedestrian accidents, cracks occur in the vehicle laminated glass due to impact of a pedestrian's head. In this study, FMH(Free Motion Headform) was used to experiment on and analyze the crack patterns on a vehicle laminated glass that collides with an adult headform at speeds of 20 km/h, 30 km/h, and 40 km/h, respectively. Applying the acquired experimental data and material property of the vehicle laminated glass to the structural analysis program LS-Dyna, we could develop the FE model of vehicle laminated glass similar to real vehicle laminated glass. We could estimate the head impact velocity and pedestrian's vehicle impact velocity using the Madymo program.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1170-1177
• /
• 2006

We apply VRP(Vehicle Routing Problem) to sludge collection system in this study. Sewage stores of villages are located in each village around a multipurpose dam. Sludge which is produced in sewage store of village is transported from the sewage store of village to the sewage treatment plants by the special purpose vehicle such as the tank lorry. In this paper, we propose sludge collection strategies which allocate each sewage store of village to sewage treatment plants and decide the schedule of sludge collection in order to collect sludge efficiently. The strategies aim to decrease transportation cost with deciding proposed vehicle routing and scheduling the sludge collection. When we decide route of vehicles, we consider the collection time in sewage store of village, distance between sewage store of villages and vehicle information as average velocity of vehicle, operation time of vehicle driver. We also develop the SCMS(Sludge Collection Management System) based on windows system with real data which is used in certain circumstance. And we experiment to figure out vehicle route and transportation cost throughout changing input data.

• 한국멀티미디어학회논문지
• /
• 제15권8호
• /
• pp.996-1003
• /
• 2012

본 논문은 차량용 전방 카메라를 이용하여 근거리 옆 차선의 차량을 검출하는 방법을 제안한다. 근거리 옆 차선의 차량은 상대적 위치에 따라 형태의 변화가 심하기 때문에 기존의 방법들은 대부분 움직임 정보를 이용하여 근거리 옆 차선 차량을 검출한다. 그러나 이러한 움직임 정보에 기반한 방법들은 자가 차량을 앞지르는 차량만 검출할 수 있다는 문제가 있다. 이러한 문제를 해결하기 위해 제안하는 방법은 움직임 정보를 사용하는 대신 근거리 옆 차선 차량이 존재하는 관심 영역의 특징을 이용한다. 이로 인해 근거리 옆 차선의 추월 차량 뿐 아니라 정지해 있거나 나란히 주행하는 차량들 또한 검출이 가능하다. 실험 결과, 제안하는 방법은 다양한 날씨 및 도로 환경에서 근거리 옆 차선 차량을 효과적으로 검출하였으며 실시간 처리 속도를 보여주었다.

• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.86-92
• /
• 2014

In this paper, prediction of separation trajectory for Two-stage-To-Orbit space launch vehicle has been numerically simulated by using an aerodynamic database based on steady state analysis. Aerodynamic database were obtained for matrix of longitudinal and vertical positions. The steady flow simulations around the launch vehicle have been made by using a 3-D RANS flow solver based on unstructured meshes. For this purpose, a vertex-centered finite-volume method was adopted to discretize inviscid and viscous fluxes. Roe's finite difference splitting was utilized to discretize the inviscid fluxes, and the viscous fluxes were computed based on central differencing. To validate this flow solver, calculations were made for the wind-tunnel experiment model of the LGBB TSTO vehicle configuration on steady state conditions. Aerodynamic database was constructed by using flow simulations based on test matrix from the wind-tunnel experiment. ANN(Artificial Neural Network) was applied to construct interpolation function among aerodynamic variables. Separation trajectory for TSTO launch vehicle was predicted from 6-DOF equation of motion based on the interpolated function. The result of present separation trajectory calculation was compared with the trajectory using experimental database. The predicted results for the separation trajectory shows fair agreement with reference[4] solution.

• 대한본초학회지
• /
• 제30권2호
• /
• pp.19-24
• /
• 2015

Objectives : The experiment was performed to investigate promotive effects of haeae-tang (HET) extract, a traditional Korean medicinal recipe, on hair growth, protein and gene expression in hair-removed C57BL/6. Methods : In experiment, animals were divided into 3 groups including normal (vehicle), HET ethanol extract and 5% minoxidil-treated groups (Minoxidil, positive control). The vehicle or testing samples were daily treated with 0.2ml per on hair-shaved dorsal skin of C57BL/6mice for 15 days. Effects of testing samples on hair growth was monitored through phototrichogram analysis by folliscope on the initial, $5^{th}$, $10^{th}$, $15^{th}$ day, respectively. Also, gene and protein expressions of vascular endothelial growth factor (VEGF) and Insulin like growth factor-1 (IGF-1), relevant to hair growth, were examined. Results : Hair density and hair thickness of Minoxidil treated-group was significantly increased compared to that of vehicle application on the $15^{th}$day, respectively. Dorsal hair density of HET treated-group was significantly increased compared to that of vehicle application on the $15^{th}$day. In addition, the Minoxidil group significantly increased the expression of cutaneous IGF-1 protein and mRNA compared to that of the vehicle-applied group on the $15^{th}$ day. And HET-treated group significantly increased the expression of dorsal VEGF protein compared to that of the vehicle-applied group on the $15^{th}$ day. Conclusions : These results suggest that this Korean medicinal recipe, HET has promoting activity on hair growth in an Alopecia animal model thus it can be used as a material of agent or products for improvement or prevention of alopecia.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1543-1544
• /
• 2011