• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.145-154
• /
• 2009

The main goal of this paper is to develop a methodology for increasing the reliability of truck OD matrices in Seoul Metropolitan Area. We propose a Hybrid Method made up of five processes by using Non-Traffic Assignment and Gradient Method. A Hybrid Method and Gradient Method have applied for comparison and estimation in Seoul Metropolitan Area. Mean Error and Root Mean Square Error of a Hybrid Method present lower than Gradient Method. The findings of this paper show that the new truck OD matrices created by a Hybrid Method are more reliable than the existing truck OD matrices in the Seoul Metropolitan Area.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.63-69
• /
• 2010

Since speed limit enforcement in school zones is the most important to reduce the occurrence of severe child related accidents, school zones typically have a speed limit of 30km/h. However, it is found that the majority of vehicles passing school zones are traveling over 30km/h. This indicates that school zones are not being effectively operated to achieve the main objective which is the reduction of child related accidents. This study aims to identify the factors affecting the violation of speed limits in school zones through the results of field survey from 8 elementary schools. The results showed that time period, the number of lanes, the width of sidewalks, and the status of colored pavement were found to be highly associated with the violation of speed limits in school zones at the 95% significance level. The results of this study may provide some insights for making safe environments around schools.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.75-83
• /
• 2013

PURPOSES: The purpose of study is to understand the characteristic of driving noise from the front and rear tire for effective active noise cancellation application. METHODS : As literature review, noise measurement methods were reviewed. Noise measurement conducted at three kind of section by road slope using CPX(Close Proximity Method). Noise data was compared by total sound pressure level and 1/3 octave band frequency sound pressure level. Also, each section was compared by T-test using SPSS. RESULTS : In the case of the uphill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low and high frequency band. In the case of high slope section of Sangsaek-Ri, the sound pressure level of the front tire was higher than that of the rear tire in high frequency. Also, in the case of the downhill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low frequency band. However, the sound pressure levels of both the front and rear tires were approximately the same in the high slope section of Sangsaek-Ri. The result of T-test showed that total sound pressures of the front and rear tires were not different from each other in the case of high slope and high speed. CONCLUSIONS: Road slope was not an important variable for effective active noise cancellation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.91-98
• /
• 2011

Road signs are part of the traffic facilities intended to guide drivers to their destinations in a safe and comfortable manner. Due to the creation of new routes, changes to the old routes, and the deterioration of road signs, road signs do require efforts to do ongoing field investigations and put the results in a database. The purpose of this study was to propose methodologies to do field investigations and build a database for road signs efficiently. For that purpose, a mobile mapping system was designed for field investigations. The designed mobile mapping system was comprised of three cameras to produce image information about road signs, GPS/IMU/DMI to obtain information about the position and attitude of a vehicle, and a laser scanner to generate information about the locations of road signs and routes. Also proposed in the study was a procedure to automatically detect the areas of road signs in the road signs images and recognize their characters.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.13-21
• /
• 2011

In mobile environment supporting mobility technologies, user requirements have been increased with respect to utilization of location information. In particular, moving object DBMS has consistently posed in order to efficiently maintain traffic information related to location of vehicle which tents to tremendously change over time. Despite the fact that these sorts of researches must be taken into consideration, empirical studies on moving object in terms of map database for lbs service, spatial attribute of which is continuously changed over time, have rarely performed. Therefore, aim of this paper is to suggest efficient spatial index scheme, which is capable of supporting query processing algorithm and location of moving object over time, by developing new empirical model. As a result, we can come to the conclusion that moving object model based on multi-fixed grid index makes it possible to cut down on the number of entity for retrieving. What's more, this model enables hierarchical data to be accessed through efficient spatial filtering on large-scale lbs data and constraints in accordance with level in order to display map.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.767-778
• /
• 2006

This study was carried out to evaluate the temporal variations of VOCs at an urban site, and to compare the concentrations of VOCs at an urban site in Daegu with those at a suburban site in Gyeongsan. Three hourly VOC samples in the ambient air were collected using a sequential tube sampler (STS 25, Perkin Elmer) throughout two weeks during May and July representing spring and summer seasons, respectively. The VOC concentrations were determined by an automatic thermal desorption apparatus with GC/MS analysis. A total of 12 VOCs of environmental concern were determined, which are chloroform, benzene, trichloroethylene, toluene, tetra-chloroethylene, ethylbenzene, m+p-xylenes, o-xylene, styrene, 1,3,5- and 1,2,4-trimethylbenzenes. Among 12 target VOCs, the most abundant compound appeared to be toluene, being followed by xylenes. The mean concentrations at the urbn site were 1.2 pub for benzene and 20.4 ppb for toluene (n=221) while the mean levels at the suburban site were 0.9 ppb and 4.3 ppb for benzene and toluene (n=96), respectively. The urban site concentrations were typically several-fold higher than those measured at the suburban site. It was found that general trends of VOC levels were significantly dependent on traffic conditions at the sampling site since VOC concentrations were at their maximum during rush hours, i.e. $9{\sim}12a.m$ and $6{\sim}9p.m$. Statistical investigations were conducted to investigate any significant relationships between VOC concentrations and affecting factors. Calculated correlation coefficients among VOCs were positively significant at a level of 0.05 in most cases. Increased concentrations of toluene in the urban site were estimated to reflect the effect of large industrial sources, mainly from textile industry.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.167-175
• /
• 1993

This article contains three objectives. First it is to revise unnecessary procedures of a transportation models and transform results of a model into an image. Second objectives is to develop an operational structures which automatically input all data needed from arc-node topology to link-node topology of transportation network. By solving the network discrepancy, time and money for constructing to transportation can be saved. In addition, the rate of errors that my caused during data input process can be reduced. Conclusively, it is found that the integration package may provide user friendliness and reduce the rate of errors. The package can extract informations such as distance between zones and nodes, lane numbers, and hierarchy from arc-node topology for executing SDI. Another advantage of integration is the ability of spatial analysis. The integrated package may provide adequate arrangements of traffic facilities and checking systems of the shortest path. Finally, the database function of GIS package provides various information about study area for transportation analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.188-195
• /
• 2012

Many systems are developing for the realization of NCW(Network Centric Warfare). UAV(Unmanned Aerial Vehicle) Network is attracting attention in a lot of military applications. In general, UAVs have the potential to create an ad-hoc network and greatly reduce the hops from source to destination. However, UAV networks exhibit unique properties such as high mobility, high data rate, and real time service. The routing protocols are required to design the multi-hop routing protocols that can dynamically adapt to the requirements of UAV network. In this paper we analyse Geographic Routing Protocol is based on geographical distance between source and destination for efficient and reliable transmission. Geographic Routing Protocol is evaluated in video service scenarios with TDMA model in our simulation. The simulation results show that the performance of Geographic Routing Protocol is better than the MANET Routing Protocol in terms of packet received ratio, end to end delay, and routing traffic sent.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2011

The safety applications based on the IEEE 802.11p, periodically transmit the safety-related information to all surrounding vehicles with high reliability and a strict timeline. However, due to the high vehicle mobility, dynamic network topology and limited network resource, the fixed beacon scheduling scheme excess delay and packet loss due to the channel contention and network congestion. With this motivation, we propose a novel beacon scheduling algorithm referred to as spatial-aware(SA) beacon scheduling based on the spatial context information, dynamically rescheduling the beaconing rate like a TDMA channel access scheme. The proposed SA beacon scheduling algorithm was evaluated using different highway traffic scenarios with both a realistic channel model and 802.11p model in our simulation. The simulation results showed that the performance of our proposed algorithm was better than the fixed scheduling in terms of throughput, channel access delay, and channel load. Also, our proposed algorithm is satisfy the requirements of vehicular safety application.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.94-102
• /
• 2012

Recently entered into an aging socity as the number of elderly drivers is increasing. Traffic accidents of elderly drivers are caused by driver inattentions such as poor vehicle control due to aging, visual information retrieval problems caused by presbyopia, and objects identifying problems caused by low contrast sensitivity. In this paper, detection method of ROIs on the road is proposed. The proposed method creates the saliency map to detect the candidate ROIs from the input image. And, the input image is segmented to obtain the ROIs boundary. Finally, selective visual attention regions are detected according to the presence or absence of a segmented region with saliency pixels. Experimental results from a variety of outdoor environmental conditions, the proposed method presented a fast object detection and a high detection rate.