• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.30-34
• /
• 2007

Structural integrity of railway vehicles should last for a long period against various and continuous fatigue loadings, and the carbody structures of railway vehicle are manufactured by applying multiform welding types for each material. Since the most of cracks are occurred and proceeded at the vicinity of welding area during the lifetime of carbody structure, the fatigue strength evaluation for welding area of carbody structure should have been carried out. Rotem Company has evaluated lifetime and fatigue strength of carbody structure according to the fatigue analysis based on the international standard and/or inner-official regulation. This study introduces the fatigue analysis method that we have evaluated and calculated the damages for the welding areas of carbody structure under various fatigue loading conditions using cumulative fatigue damage rule(Miner's rule) to verify whether the cumulative damage does exceed unity. This study contains the fatigue test of specimens to derive stress-life relations(S-N curve), sub-modeling analysis and the calculation of cumulative damages under fatigue loading. The fatigue analysis verifies the welding area shall be capable of withstanding under fatigue loading, identifies how critical area shall be selected and presents the principles to be used for design verification.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.197-202
• /
• 2014

In order to operate multiple UAVs for multiple tasks efficiently, we need a task allocation algorithm with minimum cost, i.e.,total moving distance required to accomplish the whole mission. In this paper, we have proposed the MCBAA (Modified Consensus Based Auction Algorithm) which can be suitably applied to the operation of multiple UAVs. The key idea of proposed algorithm is to minimize sum of distance from current location of agents to location of tasks based on the conventional CBAA. Several simulation test performed on three UAV agents with multiple tasks demonstrates the overall efficiency both in time and total distance.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.21-29
• /
• 2012

PURPOSES: This study is to investigate the mechanical performance of the fiber reinforced lean concrete with respect to different types of fibers. METHODS: Increased vehicle weight and other causes from the exposed conditions have accelerated the deteriorations of road pavement. A new multi-functional composite pavement system is being developed recently in order to extend service life and upgrade the pavement. A variety of tests were conducted before and after hardening of the concrete. RESULTS: From the test results, it was found that the use of different types of fibers did not affect the compressive strength development. This might be due to the inherent property of the lean concrete. When steel fibers were used relatively greater flexural strength and flexural fracture toughness were developed. Also addition of fly ash by replacing a part of Portland cement the fracture toughness was slightly increased. CONCLUSIONS: It has been known that the addition of fibers and use of mineral admixture can be positively considered in the development of multi-functional composite pavement system as its required mechanical performance is obtained.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.161-164
• /
• 2007

연료전지의 상용화 시점에 이르러 내구성에 대한 기술 확보가 점점 더 부각되고 있다. 현재 연료전지의 내구성을 감소시키는 1차적인 요인은 핵심부품인 촉매, 전해질막, MEA(Membrane & Electrode Assembly) 등에 의한 것이며 2차적인 요인은 운전 시스템 및 환경 등에 의해 결정되어진다. 특히, 연료전지자동차는 이동용, 가정용, 발전용에 비하여 부하변동이 극심한 조건에서 운전되기 때문에 연료전지 시스템의 내구성 확보에 많은 제어기술이 요구된다. 본 연구에서는 연료전지자동차 운전조건(Driving mode)을 부하변동 기준에 의한 고전류, 중전류, 저전류의 3가지 모드로 분류하였다. 각각의 운전조건에서 일정 cycle마다 성능곡선을 측정하여 10만 cycle 이상의 반복운전을 수행하였으며 측정된 성능곡선을 empirical equation에 적용하여 시간에 따른 overvoltage 인자에 대한 분석을 하였다. 운전시간이 증가함에 따라 고전류 모드의 경우 activation overvoltage 인자 중 current density loss가 증가하여 OCV가 급격히 감소하였으나 내구성은 저전류 모드에 비하여 높게 나타났다. 저전류 모드의 경우 고전류 모드와 상반된 결과를 보였으며 성능감소요인은 activation 및 ohmic overvoltage의 점차적인 증가에 의한 것으로 분석되었다.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.121-130
• /
• 1999

Generally, A Dynamic Absorber by using Active viscous Damping is highlighted for effective suspension system, such as improved ride comfort and handling in the market. Lately, this system based on the Sky-Hook damper theory is introduced by the name of "Active Dynamic Absorber" to us. This system has an excellent performance in contrast to Passive. Adaptive Dynamic Absorber, besides having low cost components of system, low energy consumption. light weight of system. In this viewpoint. most of car-maker will adopt this system in the near future. For this reason, we developed Dynamic Absorber by using Active viscous Damping which is equipped with continuously variable Dynamic Absorber and Control logic consisting Filter and Estimator. control apparatus of Dynamic Absorber operated by 16-bit microprocessor of high performance. variable device of viscous Damping. G-sensor so on. In this paper. several important points of development procedure for realizing this system will be described with results in which is obtained from experiment by simulation and Full car test in Proving ground. respectively.pectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.333-338
• /
• 2011

This paper describes the design process of floor damping material optimization to reduce structure borne noise. This process uses finite element analysis(FEA) along with experimental techniques to complement each other. The objective of this approach was to develop an optimized damping material application layout and thickness at the initial design stage. The first step is to find the sensitivity areas of vehicle body without damping material applied using FEA. In order to determine the high vibration areas of the floor panel, the velocity was measured using a scanning laser vibrometer from 20 Hz to 300 Hz. To excite the floor panel vibration, shaker was placed at the front suspension attachment point. The second step is the optimization process to determine the light weight solution of damping material. The design guideline of damping material was suggested that the lightweight solution was verified using test result of road noise. Design engineer could efficiently decide the design variable of damping material using parameter analysis results in early design stage.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.118-124
• /
• 2005

An automotive bushing is a device used in automotive suspension systems to reduce the load transmitted from the wheel to the frame of the vehicle. A bushing is a hollow cylinder, which is bonded to a solid steel shaft at its inner surface and a steel sleeve at its outer surface. The relation between the force applied to the shaft and the relative deformation of a bushing is nonlinear and exhibits features of viscoelasticity. In this paper, an automotive bushing is regarded as nonlinear viscoelastic incompressible material. Instron 8801 equipment was used for experimental res earch and ramp-to-constant displacement control test was used for data acquisition. Displacement dependent force relaxation function was obtained from the force extrapolation method and expressed as the explicit combination of time and displacement. Pipkin-Rogers model, which is the direct relation of force and displacement, was obtained and comparison studies between the experimental results and the Pipkin-Rogers results were carried out.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.556-561
• /
• 2006

Most of auto-body members are composed of stamping parts. These parts have the non-uniform thickness and plastic work hardening distribution during the forming process. This paper is concerned with the side impact analysis of the ULSAB-AVC model according to the US-SINCAP in order to compare the crashworthiness between the model with and without considering the forming effect. The forming effect is ca]ciliated by one-step forming analysis for several members. The crashworthiness is investigated by comparing the deformed shape of the cabin room the energy absorption characteristics and the intrusion velocity of a car. The result of the crash analysis demonstrates that the crash mode, the load-carrying capacity and energy absorption can be affected by the forming effect. It is noted that the design of an autobody should be carried out considering the forming effect for accurate assessment of crashworthiness.

• Journal of Veterinary Clinics
• /
• v.32 no.1
• /
• pp.56-61
• /
• 2015

The object of this study was to find out the immunomodulatory effects of Ginger Aqueous extracts, as compared with that of ${\beta}$-glucan well-known an immune modulator, on the cyclophosphamide (CPA) induced immunosuppress mice. To induce immunosuppress, 150 and 110 mg/kg of CPA were dissolved in saline and injected intraperitoneally at 3 or 1 day before start of test article administration, respectively. ${\beta}$-glucan or gingers (125, 250, 500 mg/kg) were dosed, 4 times at 12-hr intervals starting 24hrs after last CPA-treatment. Distilled water was used as a vehicle and each groups were used 10 mice. As results of twice intraperitoneal CPA treatment, decreases in the body weight and gain, weight of thymus, spleen. However these CPA-induced immunosuppress changes were inhibited by treatment of three different dosages of ginger or ${\beta}$-glucan as compared with CPA control. Similar favorable inhibitory activities on weight and histopathological change of spleen and thymus induced CPA treatment were detected between ${\beta}$-glucan and ginger 250 mg/kg treated groups.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.33-42
• /
• 2010

Travel speed is an important parameter in measurement of road traffic. UTIS(Urban Traffic Information System) was developed as a type of section detector. However, UTIS incur errors caused by irregular vehicle trajectories, wireless communication range and so on. This paper suggests a new model that use an error-filtering algorithm to improve the accuracy of travel speed measurements. In the field test, the variance of the percent errors measured by the new model was reduced. Therefore, it can be concluded that the proposed model significantly improves travel speed measuring accuracy.