• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.67-74
• /
• 2009

본 연구에서는 임베디드 시스템과 지그비(Zigbee) 무선통신을 기반으로 지능형 자동차를 위한 모니터링 및 제어가 가능한 임베디드 웹서버를 구축하였다. 자동차의 모든 정보를 담고있는 ECU(Electronic Control Unit)에 주제어기와 임베디드 시스템을 인터페이스 시켜 자동차의 운행정보를 모니터링하고, 자동차의 내, 외부에 추가된 센서신호는 지그비 통신을 이용해 임베디드 시스템에 전달하도록 하였다. 임베디드 시스템을 이용해 웹서버를 구축했기 때문에 개인용 컴퓨터 및 모바일 기기를 이용하여 차량에 접속할 수 있으며, 자동차의 상태를 실시간 감지하고 제어할 수 있다.

• 대한임베디드공학회논문지
• /
• 제10권5호
• /
• pp.273-279
• /
• 2015

The vehicle has lots of embedded systems. Each of systems has its own role. In case of the vehicle, simple failure of system can be critical to driver. Therefore all of embedded system should be managed based on importance factors to be effective. In this paper, we consider the resilience as the importance factor for the driving system with ACC(Adaptive Cruise Control). We propose metrics to calculate the resilience of the embedded system. To get the resilience of system, we calculate the reliability and the resilience of nodes in the system using its failure rate. The resilience of whole system can be presented by the resilience of nodes and its weight. We calculate the resilience and compare the centralized structure and the distributed structure.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.69-72
• /
• 2008

본 연구에서는 자동차의 내부에 네트워크 구성을 통하여 점점 증가하는 기기들의 인식을 쉽게하도록 하였으며, 블루투스 통신을 활용하여 기기들의 확장에도 특별한 설정 없이 인식이 가능하게 하였다. 또한 임베디드 웹서버가 설치된 임베디드 시스템에 인터페이스 시켜 인터넷을 이용해 자동차에 접속할 수 있도록 하여 자동차의 상태를 감시하고 제어할 수 있고 차량내부에서는 블루투스가 내장된 이동기기로도 웹에 접속없이 운전자가 자동차의 주행제어 설정 및 차량의 이상 유무를 확인할 수 있는 자동차 관리시스템을 구현하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.243-245
• /
• 2009

In recent years, a development of automotive embedded systems called Intelligent Vehicle are used for control and communication with CAN protocol. But as various devices and protocols are developed for Vehicle communication and control, it becomes difficult to manage the systems that contain limitation of bandwidth and various control requirement. To solve these problems, we introduce a research of automotive embedded systems which is considered the automotive real time operating system, automotive communications, and control systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.413-416
• /
• 2004

The tracking antenna system must be always pointed to a satellite for data link among moving vehicles. Especially, for an antenna mounted on a moving vehicle, it needs the stabilized the antenna system. So, software and hardware, signal processing of motion detection sensors, real-time processing of vehicle dynamics, trajectory estimation of satellite, antenna servo mechanism, and tracking algorithm, are unified in the antenna system. The purpose of this paper is to design the embedded tracking antenna control system for satellite communication. The embedded OS(Operating System) based stabilization and tracking algorithm was implemented. The performance of the designed embedded control system was verified by the real satellite communication test.

• 대한임베디드공학회논문지
• /
• 제3권3호
• /
• pp.167-174
• /
• 2008

This paper presents the technology trend of various active safety systems for vehicle. The safety system is applied to various industry fields and is expected to be spread all over the market. So far, good examples of the developed active safety systems are ACC(Adaptive Cruise Control), CMS(Collision Mitigation Systems) and APSS(Active Pedestrian Safety Systems). And, a basic operation principle, system model and detection performance in a UWB radar for vehicle is investigated.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.27-31
• /
• 2005

Vehicle detector system based on image processing technology is a significant domain of ITS (Intelligent Transportation System) applications due to its advantages such as low installation cost and it does not obstruct traffic during the installation of vehicle detection systems on the road[1]. In this paper, we propose architecture for vehicle detection by using image processing. The architecture consists of two main parts such as an image processing part, using high speed FPGA, decision and calculation part using CPU. The CPU part takes care of total system control and synthetic decision of vehicle detection. The FPGA part assumes charge of input and output image using video encoder and decoder, image classification and image memory control.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.295-301
• /
• 2005

It is not easy to apply fault-tolerant techniques which are used in conventional computer systems successfully to the field of embedded computing system directly. In this paper, we study on the way of minimizing hardware and/or software backups for vehicle embedded computing systems. First, we group parts that constitute vehicle embedded systems and next feature subset is determined using the grouping information derived. The possibility of implementing graceful degradation capability in vehicle embedded systems is verified.

• 대한임베디드공학회논문지
• /
• 제9권5호
• /
• pp.293-297
• /
• 2014

ITS services are quickly evolving due to the convergence of ICT technologies. WAVE technology based on IEEE802.11p specification has been introduced for the high speed vehicle communication and applied into the transportation system for driving safety and convenience. Recently, WAVE technology as a inter vehicle communication is used for cooperative driving application. In this paper, the implemented inter vehicle communication system is introduced and suggested as a solution for V2X communication. The performance of the implemented inter vehicle communication system is tested and analyzed under various conditions.

• 대한임베디드공학회논문지
• /
• 제17권2호
• /
• pp.85-92
• /
• 2022

Currently, various researches on electric vehicle battery systems have been conducted from the viewpoint of safety and performance for SoC, SoH, etc. However, it is difficult to build a precise electrical model of a battery system based on the chemical reaction and SoC prediction. Experimental measurements and predictions of the battery SoC were usually performed using dynamometers. In this paper, we construct a simulation model of an electric vehicle system using Matlab Simulink, and confirm the response characteristics based on the vehicle test driving profiles. In addition, we show that it is possible to derive the correlation between the SoC, voltage, and current of the battery according to the driving time of the electric vehicle in conjunction with the BMS model.