• 대한산업공학회지
• /
• 제14권1호
• /
• pp.119-131
• /
• 1988

Vehicle Scheduling Problem (VSP) is a generic name given to a whole class of problems involving the visiting of "stations" by "vehicles," where a time is associated with each activity. The studies performed to date have the common feature of a single objective while satisfying a set of restrictions and known customer supplies or demands. However, VSPs may involve relevant multiple objectives and probabilistic supplies or demands at stations, creating multicriteria stochastic VSPs. This paper proposes a heuristic algorithm based on goal programming approach to schedule the most satisfactory vehicle routes of a bicriteria VSP with probabilistic supplies at stations. The two relevant objectives are the minimization of the expected travel distance of vehicles and the minimization of the due time violation for collection service at stations by vehicles. The algorithm developed consists of three major stages. In the first stage, an artificial capacity of vehicle is determined, on the basis of decision maker's subjective estimates. The second one clusters a set of stations into subsets by applying an efficient cluster method developed. In the third one, the stations in each subset are scheduled by applying an iterative goal programming heuristic procedure to each cluster.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.203-206
• /
• 2005

The objective of study on composite cylinder for alternative fuel vehicle is to develop safe, efficient, and commercially viable, on-board fuel storage system for the fuel cell vehicle or natural gas vehicle that use highly compressed gaseous fuel such as hydrogen or natural gas. This study presents the whole procedure of development and certification of a type 3 composite cylinder of 207bar service pressure and 70 liter water capacity, which includes design/analysis, processing of filament winding, and validation through various testing and evaluation. Design methods of liner configuration and winding patterns are presented. Three dimensional, nonlinear finite element analysis techniques are used to predict burst pressure and failure mode. Design and analysis techniques are verified through burst and cycling tests. The full qualification test methods and results for validation and certification are presented.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.50-59
• /
• 1996

The computer simulation program that calculates the transient heat load transferred to a passenger vehicle has been developed. Method for modeling mathematically various kinds of the heat load was presented and the derived equations were solved numerically. To find out the accuracy of the simulation program, the correlation of experimental and analytical results was demonstrated. By using this program, the typical characteristics about temperature distribution and instantaneous or of vehicle body color, material of glass, air-conditioning capacity, driving direction, and speed. Under a steady-state condition, the ratios of the heat load, resulting form vehicle body, glass, and interior part, were 35%, 29%, and 36%, respectively.

• Management Science and Financial Engineering
• /
• 제3권1호
• /
• pp.1-14
• /
• 1997

We address the problem of determining the sequence of a vehicle with fixed capacity to visit n nodes at which a predetermined amount is picked up and/or delivered. The objective is to minimize the total travel distance of the vehicle, while satisfying the pick-up/delivery requirements and feasibility at all nodes. Existing methods for the problem allows the vehicle to visit a node twice, which is impractical in many real situations. We propose a heuristic algorithm, in which every node is visited exactly once. Computational results using random problems indicate that the proposed heuristic outperforms existing methods for practical range of the number of nodes in reasonable computation time.

• 한국철도학회논문집
• /
• 제4권4호
• /
• pp.123-130
• /
• 2001

A chevron rubber spring is used in primary suspension system for rail vehicle. The chevron spring support the load carried and reduces vibration and noise in operation of rail vehicle. The computer simulation using the nonlinear finite element analysis program MARC executed to predict and evaluate the load capacity and stiffness for the chevron spring. The appropriate shape and the material properties are proposed to adjust the required characteristics of chevron spring in the three modes of flexibility. Also, several samples of chevron spring are manufactured and experimented. It is shown that the predicted values agree well the results obtained from experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1347-1350
• /
• 2005

Recently, as the road capacity reaches a limit and environmental problems become serious, there exists a gradual increasing need for railway vehicles that are environment-friendly, punctual, reliable and safe. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. Using the developed installed measurement system, the performance characteristics of railway vehicle could be monitored precisely. After recording the input real time data of each signal from railway vehicle to the network line, we could acquire the needed information through post processing program. We could verify the running performances of railway vehicle using this system. As a result, many latent defects have been found and corrected in the prototype train. The measurement systems have contributed to dramatic reduction of the developing period.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.979-983
• /
• 2008

A bi-modal tram can travel in not only dedicated way but also road so as to reduce construction costs and increase vehicle operation efficiency, whose passenger capacity is 2,500 to 7,000 persons/direction/hour. A bi-modal has an electronic guidance system that knows the location and route of the vehicle, and uses magnetic markers in the road surface for reference. Since a bi-modal tram will be operated in the downtown area, there is some possibility that strong wind occurred between high-rise buildings can produce sudden lateral movement (displacement) of the vehicle to influence its automatic operation controlled by electronic guidance system. For bi-modal tram in the automatic operation mode, lateral movements occurred by strong wind were calculated and analyzed in the dynamic model developed by using the ADAMS. Some useful relations among vehicle speeds, wind speeds, and lateral behaviors were discussed in this paper.

• 대한산업공학회지
• /
• 제13권1호
• /
• pp.11-24
• /
• 1987

Automatic Guided Vehicle Systems feature battery powered driverless vehicles with programming capabilities for path selection and positoning. Vehicles serve the machines in shop, following a guide path system installed on the shop floor. The basic problem in the system is to determine a fixed set of vehicle routes of minimal total distance(time) while keeping capacity and distance(time) constraints. In this paper, a heuristic algorithm is presented for scheduling the automatic guided vehicles. The algorithm routes the machines based on their distances and polor coordinate angles, taking into account the structural feature of the system. Computational experiments are performed on several test problems in order to evaluate the proposed algorithm. Finally, a framework for dealing with the case where supplies from the machines are probabilistic is described.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.451-457
• /
• 2023

Global warming is causing abnormal climates such as floods, droughts, and typhoons all over the world. According to some scientists, carbon dioxide emitted from automobiles is the main cause of global warming. To cope with this, each country is making efforts to replace the existing fossil fuel-powered engine-driven cars with electric vehicles. In order to commercialize small electric vehicles in Korea, it is necessary to solve many problems such as improvement of hill climbing capacity and improvement of power performance. In this study, we propose a proprietary model for a continuously variable transmission(CVT) of a small electric vehicle that can be operated on hills, in which a spring is mounted on a driving pulley and a driven pulley. A prototype of the CVT model using a spring was manufactured and attached to a small electric vehicle body.

• 대한교통학회지
• /
• 제30권1호
• /
• pp.75-83
• /
• 2012

동일한 수의 중차량 비율이 도로 용량에 미치는 영향이 고속도로 소통상태가 원활한 서비스수준 A와 그렇지 않은 서비스수준 E의 경우에 따라 같지 않음이 지적되고 있다. 우리나라 고속도로 용량산정 방법 역시 고속도로 운영 상태를 고려하지 않으며 중(重)차량 영향을 반영하고 있다. 본 연구는 고속도로 소통 상태별 중차량 비율이 도로 용량에 미치는 수준을 기초 시험 수준에서 진단한다. 서울 동부간선도로에서 총 15일 (360시간) 자료를 수집하였으며 이를 15분단위로 가공하여 분석하였다. 중차량 비율이 용량에 미치는 영향을 각 서비스수준별로 분석한 결과, 현재의 용량산정방법은 서비스수준 B~C에서 용량이 과소 추정되고, 서비스수준 E에서는 용량이 과대 추정되는 것을 확인하였다. 연구 결과는 현재의 도로용량편람에서 제시한 방안과는 달리 고속도로 소통상태를 반영하여 중차량 보정계수가 적용되어야 함을 의미한다.