• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.160-168
• /
• 2006

This study was performed to evaluate the effect of the addition of vegetable oils on Fenton treatment of PAHs-contaminated soil. Fenton reaction can be proceeded in the soils contaminated with PHAs only in the presence of $H_2O_2$ because of Fe content in the soil. In this case, optimum $H_2O_2$ concentration was 3%. When 17.5 mM $FeSO_4$(III) was added with 3% $H_2O_2$, the removal rate was increased up to 25%, whereas 19% of PAHs was removed with $H_2O_2$ alone. The addition of 1% of olive oil to the contaminated soil before the Fenton reaction or simultaneously increased the removal rate about 15%, compared to the case of Fenton reaction only. There were no significant differences in the removal rates of PAHs, regardless of different kinds and concentration of oils. (olive oil, soybean oil, and used-vegetable oil). The used-vegetable oils were not different from the new, expensive oils in the removal rate, so their use will be desirable in saving the money. In addition of 1% of olive oil after the reaction of 3% $H_2O_2$ and 2.5 mM $FeSO_4$(III), the removal rates of 3~4 and 5~6 ring compounds were increased 13% and 17%, respectively, compared to the case of Fenton reaction only.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.241-250
• /
• 2011

The most part of vegetable oils is accumulated as storage lipid, triacylglycerol (TAG) in seed and used as energy source when seed is germinated. It is also used as essential fatty acids and energy source for human and animal. Recently, vegetable oils have been more and more an important resource because of the increasing demand of vegetable oils for cooking and industrial uses for bio-diesel and industrial feedstock. In order to increase vegetable oils using biotechnology, over-expressing or repressing the regulatory genes involved in the flow of carbon into lipid biosynthesis is critical during seed development. In this review, we described candidate genes may influence oil amount and investigate their potential for oil increase. Genes involved in the regulation from biosynthesis of fatty acids to the accumulation oils in seed can be classified as follows: First, genes play a role for synthesis precursor molecules for TAG. Second, genes participate in fatty acid biosynthesis and TAG assembly. Lastly, genes encodes transcription factors involved in seed maturation and accumulation of seed oil. Because factors/genes determining oil quantity in seed is complex as mentioned, recently regulation of transcription factors is being considered more favorable approach than manipulate multiple genes for increasing oil in transgenic plants. However, it should be figured out the problem that bad agricultural traits induced by the overexpression of transcription factor gene.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.495-501
• /
• 2016

Mineral oil has been widely used as an insulating oil for electrical transformers for a long time, but the necessity of employing new insulation oil such as vegetable oil has been increased due to urgent needs for the biodegradability when it leaks and also for the thermal stability at a higher operation temperature. Although specific periods are required between the production and consumption, there are still short of the data to prove the insulation oils' storage stability depending upon various circumstances and their resources. Thus, this paper demonstrates the insulation oils' oxidation characteristics of both mineral and vegetable oils when each was exposed to different environments for 12 weeks. From this test, some properties including total acid number, water content and dielectric breakdown were changed under specific conditions and resources. Vegetable oils showed higher hydrophilicity and water saturation than those of mineral oils due to their molecular compositions. Under sunlight exposure condition, all insulation oils oxidized and changed their properties when exposing to the direct light, regardless of the resource used.

• Nutrition Research and Practice
• /
• v.7 no.4
• /
• pp.256-261
• /
• 2013

The aim of this study was to examine the effects of perilla oil as well as several vegetable oils, including flaxseed oil, canola oil, and rice bran oil on plasma levels of cardioprotective (n-3) polyunsaturated fatty acids in mice by feeding each vegetable oil for a period of eight weeks. Concentrations of docosapentaenoic acid (DHA) and eicosapentaenoic acid (EPA), fish-based (n-3) polyunsaturated fatty acids, showed an increase in the plasma of mice fed perilla and flaxseed oils compared to those of mice in the control group (P < 0.05), whereas rice bran and canola oils did not alter plasma DPA and EPA concentrations. Arachidonic acid concentration was increased by feeding rice bran oil (P < 0.05), but not canola, flaxseed, or perilla oil. In addition, oleic acid, linoleic acid, and docosahexaenoic acid concentrations were altered by feeding dietary rice bran, canola, perilla, and flaxseed oils. Findings of this study showed that perilla oil, similar to flaxseed oil, is cardioprotective and could be used as an alternative to fish oil or even flaxseed oil in animal models.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.342-349
• /
• 2020

The rapidly increasing threats to the environmental has increased the demand for biodegradable lubricants. Vegetable oils, such as olive, coconut, and sunflower oils, are readily obtainable and are not harmful, unlike synthetic and mineral oils. The tribological characteristics of these oils should be adequately examined for industrial applications. In this study, the lubrication characteristics of olive oil is investigated using a pin-on-disk-type tribometer under 500 gf of normal force, and the examination results are compared and analyzed with those of commercial synthetic lubricants for friction and wear. In addition, stearic acid, which is a type of saturated fatty acid, is mixed with olive oil as an additive to improve its lubrication characteristics. Olive oil with stearic acid additive is thus observed to exhibit the lowest friction coefficient for rotational speeds of 200 to 800 rpm. According to the wear analysis, a minimal amount of wear is observed when no additive is used. Hence, olive oil is able to effectively reduce friction and wear at relatively low speeds. These low friction and wear characteristics of olive oil are attributed to its compatibility with the substrate.

• Journal of Plant Biotechnology
• /
• v.41 no.3
• /
• pp.107-115
• /
• 2014

Vegetable oils (triacylglycerols) produced mainly in seeds of plants are used for valuable foods that supply essential fatty acids for humans as well as industrial raw materials and biofuel production. As the demanding for vegetable oils has increased, plant metabolic engineering to produce triacylglycerols in biomass such as leaves has been considered and explored for alternative source of vegetable oils. Leaves are genetically programmed to supply the fixed carbon by photosynthesis to other organs for plant development and growth. Therefore, in order to produce and accumulate triacylglycerols in leaves, one should take account of multiple metabolic pathways such as carbon flux, competition of carbohydrate and fatty acid biosynthesis, and triacylglycerols turnover in leaves. The recent metabolic engineering strategy has showed potential in which the co-expression of three genes WRINKLED1, DGAT1, and OLEOSIN involved in the critical step for increasing the fatty acid synthesis, accumulating triacylglycerols, and protecting triacylglycerols, respectively produced higher amount of vegetable oils in leaves. Developing of genetically engineered plants producing vegetable oil in biomass at non-agricultural lands will be promising to the future success of the field.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1987.11a
• /
• pp.28-38
• /
• 1987

The effective use of rolling oils in the metalworking industry is generally regarded as an art rather than a science. With variations in the quality of some of the raw materials used e.g. vegetable oils, it was often difficult to predict the performance of a product from one batch to another. However, with the increasing use of synthetically produced components and better understanding of the rolling process itself, more consistent and predictable results can now be obtained.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.2
• /
• pp.191-195
• /
• 1999

Bioconversion of fumarate to succinate by Enterococcus sp. RKY1 was enhanced when Tween surfactant, organic solvent, and vegetable oil were added to the fermentation medium. The maximum amount of succinate produced was 80.4 g/l after a 24 h incubation when Tween 80 was added to the culture to a final concentration of 0.1 g/l. Triton X-l00 was observed to damage the enzymes and inhibit the formation of succinate. The addition of 10 ml/l acetone increased the production of succinate by 110%. Vegetable oils used were found to be effective for succinate production as well as for the cell growth. Similar productivity increases were obtained with corn oil and Tween 80 plus biotin with the total productivity being 3.6 g/l/h, and 3.5 g/l/h, respectively, which was approximately 25% greater than that of the control. Therefore, these results indicate that com oil can be considered the most appropriate agent for the production of succinate where succinic acid was primarily used in the production of food, medicine, and cosmetics.

• Journal of ILASS-Korea
• /
• v.14 no.4
• /
• pp.153-162
• /
• 2009

The use of inedible vegetable oils as substitute for diesel fuel in compression ignition engine is of significance because of the great need for edible oil as food, and the reduction of biodiesel production cost etc. Jatropha curcas oil which is a leading candidate for the commercialization of inedible vegetable oils is selected in this study for reviewing the application in CI engine as an alternative fuel. The important properties of jatropha oil (JO) and JO biodiesel are summarized from the various sources in the literature. It is found that five different types of alternative fuel from JO such as neat JO, JO blends with diesel or other fuel, neat JO biodiesel, JO biodiesel blends with diesel or other fuel and degummed JO were extensively examined in the diesel engine. Two different application types of alternative fuels from JO such as preheating and dual fuelling were also tested, It should be pointed out that most of these applications are limited to single cylinder conditions. The systematic study for the selection of effective application method is required. It is clear that the blends of JOME and diesel can replace diesel fuel up to 10% by volume for running the existing common rail direct injection systems without any durability problems. The systematic assessment of spray characteristics of different types of JO and its derivatives for use as diesel engine fuel is also required.

• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.316-324
• /
• 2014

Milk fat is an important food component, and plays a significant role in the economics, functional nutrition, and chemical properties of dairy products. Dairy products also contain nutritional resources and essential fatty acids (FAs). Because of the increasing demand for dairy products, milk fat is a common target in economic fraud. Specifically, milk fat is often replaced with cheaper or readily available vegetable oils or animal fats. In this study, a method for the discrimination of milk fat was developed, using FAs profiles, and triacylglycerols (TGs) profiles. A total of 11 samples were evaluated: four milk fats (MK), four vegetable oils (VG), two pork lards (PL), and one beef tallow (BT). Gas chromathgraphy analysis were performed, to monitor the FAs content and TGs composition in MK, VG, PL, and BT. The result showed that qualitative determination of the MK of samples adulterated with different vegetable oils and animal fats was possible by a visual comparision of FAs, using C14:0, C16:0, C18:1n9c, C18:0, and C18:2n6c, and of TGs, using C36, C38, C40, C50, C52, and C54 profiles. Overall, the objective of this study was to evaluate the potential of the use of FAs and TGs in the detection of adulterated milk fat, and accordingly characterize the samples by the adulterant oil source, and level of adulteration. Also, based on this preliminary investigation, the usefulness of this approach could be tested for other oils in the future.