• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.680-687
• /
• 2006

An overview is given to optimize the solid state processes toward phase pure and well-crystallized fine particulates of mixed oxides, serving as electroceramic materials in various genres. Elevation of the reactivity and preservation of stoichiometry of the starting mixture are of universal importance. Mechanical activation is versatile for these purposes, particularly when an oxygen atom as a hinge promotes formation of hetero-bridging bonds between dissimilar cationic species prior to calcination. Case studies carried out recently in the author's laboratory are displayed and compared for ferroelectric materials, i.e. $PbMg_{1/3}Nb_{2/3}O_3$ $xPbTiO_3$(PMN-PT), $(1-y)Pb(Zn_xMg{1-x})_{1/3}$ $yNb_{2/3}O_3$ (PZN-PMN), $BaBi_2Ta_2O_9$ (BBT), $Ba(Mg_{1/3}Ta_{2/3})O_3$ (BMT), and ferromagnetics, i.e. M-, Y-, and Z-phases of Ba-hexaferrites.

• 공업화학
• /
• 제16권3호
• /
• pp.440-448
• /
• 2005

폐 유리병을 비롯한 폐 유리들을 대상으로 이들을 세척 또는 불순물의 분리 등 전처리를 하지 않고 건축용 단열재로서 발포유리 제조를 위한 원료로서의 적용 가능성 여부를 타진하기 위하여 폐 병유리, 폐판유리 및 LCD 유리 등의 물리화학적 특성을 조사하였다. 이를 위해서 폐 유리의 화학적 성분 분석, 열분석, 결정학적 분석, 점성, 유변학적 분석을 시행하였으며 이 결과를 바탕으로 정성적인 발포유리 제조도 시도하였다. 모든 분석 및 검토의 결과 및 폐 유리병 및 판유리는 발포유리의 제조 원료로서 충분한 사용가능성을 보여 주었다.

• Computers and Concrete
• /
• 제5권6호
• /
• pp.573-597
• /
• 2008

Among artificial intelligence-based computational techniques, adaptive neuro-fuzzy inference systems (ANFIS) are particularly suitable for modelling complex systems with known input-output data sets. Such systems can be efficient in modelling non-linear, complex and ambiguous behaviour of cement-based materials undergoing single, dual or multiple damage factors of different forms (chemical, physical and structural). Due to the well-known complexity of sulfate attack on cement-based materials, the current work investigates the use of ANFIS to model the behaviour of a wide range of self-consolidating concrete (SCC) mixture designs under various high-concentration sodium sulfate exposure regimes including full immersion, wetting-drying, partial immersion, freezing-thawing, and cyclic cold-hot conditions with or without sustained flexural loading. Three ANFIS models have been developed to predict the expansion, reduction in elastic dynamic modulus, and starting time of failure of the tested SCC specimens under the various high-concentration sodium sulfate exposure regimes. A fuzzy inference system was also developed to predict the level of aggression of environmental conditions associated with very severe sodium sulfate attack based on temperature, relative humidity and degree of wetting-drying. The results show that predictions of the ANFIS and fuzzy inference systems were rational and accurate, with errors not exceeding 5%. Sensitivity analyses showed that the trends of results given by the models had good agreement with actual experimental results and with thermal, mineralogical and micro-analytical studies.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.262-267
• /
• 2000

To tap the possibility of exploiting the precipitates as flux-pinning center in the Bi-2223 superconducting system, as-received Bi-2223/Ag tapes with the starting composition of Bi$_{1.8}$Pb$_{0.4}$Sr$_2$Ca$_{2.2}$Cu$_3$O$_8$ were post-annealed at various temperature, oxygen partial pressure, and annealing time. The 2$^{nd}$ phases in the annealed specimen were analysed with XRD, SEM, TEM, and EDS. The size and the distribution of the precipitates such as (Ca,Sr)$_2$(Pb,Bi)O$_4$ and Bi$_{0.5}$Pb$_3$Sr$_2$Ca$_2$CuO$_{12+{\delta}}$ (3221) in the Bi-2223 matrix was controllable by varying heat-treatment condition without breaking the connectivity of the 2223 grains. The nano-size precipitates within the 2223 grains are conjectured as working as flux-pinning sites, resulting in increased J$_c$ value.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.395-399
• /
• 2011

In this study, micro gas sensors for ammonia gas were prepared by adopting MEMS technology and using a sol-gel process. Three types of sensors were prepared via different synthesis routes starting with W sol and Ru sol mixture. This mixture was deposited on a MEMS platform and the platform was subsegueny heated to a temperature of $350^{\circ}C$. The topography and crystal structure of the sensing film were studied using FE-SEM and XRD. The response of the gas sensor to $NH_3$ gas was examined at various operating temperatures and gas concentrations. The sensor response increased almost linearly with gas concentration and the best sensing response was obtained at $333^{\circ}C$ for 5.0 ppm $NH_3$ for the specimen prepared by coating $WO_3$ powders with the Ru sol mixture.

• 한국분말재료학회지
• /
• 제25권6호
• /
• pp.482-486
• /
• 2018

Despite numerous advances in the preparation and use of GaN, and many leading-edge applications in lighting technologies, the preparation of high-quality GaN powder remains a challenge. Ammonolytic preparations of polycrystalline GaN have been studied using various precursors, but all were time-consuming and required high temperatures. In this study, an efficient and low-temperature method to synthesize high-purity hexagonal GaN powder is developed using sub-micron $Ga_2O_3$ powder as a starting material. The sub-micron $Ga_2O_3$ powder was prepared by an ultrasonic spray pyrolysis process. The GaN powder is synthesized from the sub-micron $Ga_2O_3$ powder through a nitridation treatment in an $NH_3$ flow at $800^{\circ}C$. The characteristics of the synthesized powder are systematically examined by X-ray diffraction, scanning and transmission electron microscopy, and UV-vis spectrophotometer.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.624-633
• /
• 2014

This study separated the crude extract (70% ethanol) of and its three fractions (hexane, chloroform and ethyl acetate extracts) on the basis of polarity indexes, and examined for their insecticidal activities against aphid (Uroleucon lactucicola). For crude extraction, the 70% ethanol extract showed the best extract yield (58.0%) and insecticidal activity (69.0%) among the various concentrations tested (water, 30% ethanol, 50% ethanol, 70% ethanol and 95% ethanol). The major chemical compounds of different fractions (hexane, chloroform and ethyl acetate extracts) were identified as eugenol by head space-GC-MS analysis. The hexane extract showed the highest eugenol content (43.7%) and insecticidal activity (80.0%). The insecticidal activity is accordingly believed to be attributable to the eugenol component. This may provide a useful starting point for the development of bio-pesticides.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.124-129
• /
• 2005

Copper oxide, CuO, are very important components include of high temperature super- conductors, and widely used. The properties of sintered materials were affected by the size and shape of copper oxide with starting materials in the solid-phase reaction. A homogeneous and fine CuO powder was prepared by thermal decomposition of the copper oxalate precursor. Copper oxalate was precipitated by the addition of copper nitrate solution to an oxalic acid solution. The influence of various factors such as temperature, pH, concentration as well as ultrasonic irradiation in the solution were investigated.

• 대한화학회지
• /
• 제32권2호
• /
• pp.149-155
• /
• 1988

ZSM-5, ZSM-8, ZSM-11 및 실리카라이트를 포함하는 펜타실 제올라이트들을 여러가지 유기양이온과 실리카졸을 사용하여 합성하고 반응온도, 교반, 숙성시간 등 합성조건을 변화시키므로서 균일한 크기와 모양을 갖는 결정을 얻었다. TEA-OH(수산화 사에틸암모늄), TPA-OH, TBA-OH 및 Choline이 유기양이온으로 사용되었으며 콜로이달 실리카(Snowtex)를 실리카원으로 사용했다. 합성 실험은 $2{\ell}$ 압력 반응기 (parr제품)와 자체 제작된 자석식 반응기를 사용하였으며, 반응물 조성(실리카/알루미나 비), 반응온도 등이 펜타실 제올라이트 합성의 중요한 인자임을 알았다.

• 한국분말재료학회지
• /
• 제11권5호
• /
• pp.391-398
• /
• 2004

Calcium phosphate powders were successfully synthesized by using re-cycled eggshell and phosphoric acid. The crystallization behavior and powder morphologies of the synthesized powders were dependent on the starting condition of the eggshell, the mixing ratio and method of the eggshell and phosphoric acid, and calcination temperature. In general, $\beta$-tricalcium phosphate was stably synthesized at about $900^{\circ}C$ for 1h at each proper mixing ratio. And, the synthesized powders showed the similar microstructures to the morphology of original eggshell with uniform particle sizes. In this study, the calcium phosphate powders were synthesized with eggshell in various processing method. And their unique microstructures obtained from the eggshell were also. observed. The crystalline developments and microstructures of the synthesized powders were examined by X-ray diffractometer and scanning electron microscopy.