• Journal of the Korean Dietetic Association
• /
• v.4 no.1
• /
• pp.14-19
• /
• 1998

This study was designed to investigate the role of onion as a natural antioxidant. Onion was distinguished as yellow onion peel and onion flesh. Onion samples were extracted with 5 different kinds of solvents such as water, 70% ethanol, 99.9%ethanol, 99.9% methanol, and 96% butanol in order to select optimal extraction solvents, In this part of study linoleic acid was used s an model system for the purpose of determining the antioxidant activities. The optimal extraction rate of various solvents containing onion samples was determined by measuring extraction yield, electron donating ability(EDA), thiobarbituric acid(TBA), and thiocyanate, which are common methods for measuring activity. As a result 70% ethanol was shown as the most effective solvent.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.965-970
• /
• 2008

The separation of sulfone components using light cycle oil(LCO) after oxidation was carried out by solvent extraction method using various polar solvents such as water, n-methyl-2-pyrrolidone(NMP), dimethyl sulfoxide, ethyl acetate, acetonitrile, dimethyl formamide, and methyl alcohol. It was found that phase separation between LCO layer and solvent occurred under mixed solvent adding a proper amount of water. The mixture solvent of NMP and water was a promising extraction solvent due to the selective removal and high distribution coefficient of sulfone component in LCO. 99.5% over of sulfur contents in LCO can be removed by 4 stages equilibrium extraction.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.103-107
• /
• 1999

Even if odorous compounds remain very low concentration in water, it cause strong odor. Because Geosmin and most of odorous compound had very low vaporization, those were difficult to analyze with GC/MSD and Purge & Trap. So, we needed pre-treatment method for decreasing amounts of extracting solvents, improving recovery efficiencies and increasing analytical efficiencies. This study developed efficient technology for analyzing odorous compounds, using various adsorbents and extracting solvents. The optimum adsorbent was XAD resins. Especially, XAD-2, XAD-7 and XAD-2010 were superior, but XAD-2 of these and the optimum extraction solvent is MTBE. Other extraction solvents' efficiency is in order of MTBE>Dichloromethane>n-Hexane>Diethylether. The optimum NaCl dosage for increasing efficiency is 5 g in liquid-liquid extraction method. The shaking time(0~24hr) has no concern with adsorption efficiency. The optimum adsorbent is XAD-2 resin and extraction solvent is MTBE. Dosing NaCl, adsorption efficiency is increased in liquid-liquid extraction method, but NaCl has no effect on liquid-solid extraction method. In this experimental results, this algae toxins(Mycrocystin, Anatoxin etc.).

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.595-606
• /
• 2000

In order to compare analytical conditions for measuring PAHs(polycyclic aromatic hydrocarbons) in ambient air, a series of experiment were conducted using three different types of extraction methods that include:(1) accelerated solvent extraction (ASE), (2) soxhlet, and (3) sonification methods. Efficiency and relevant analytixal parameters for each of these methods were examined on five different types of solvents that include:(1) 10% diethyl ether in n-hexane(v/v), (2) dichloromethane, (3)cyclohexane.(4) toluene, and (5) Benzene: ethanol (4:1). Comparison of extraction efficiency for various combinations between methods and solvents was made through an application of both internal and external standard calibration techniques. The extraction efficiency tests, when checked using both internal and external standards, allowed us to derive meaningful comparison among different techniques and among solvents.

• Journal of the Korean Society of Tobacco Science
• /
• v.36 no.1
• /
• pp.26-33
• /
• 2014

Simultaneous determination of crop protection agents(CPAs) in food are done with multi-residue methods, which are composed of sample clean-up, concentration, chromatographic separation and detection. Stir Bar Sorptive Extraction(SBSE) technique is used for sample preparation of various analytes in several fields. The aim of this study was to develop a sensitive and fast method based on SBSE followed by thermal desorption - gas chromatography - mass spectrometry(TD - GC/MS) to determine CPAs in tobacco sample. For the analysis of tobacco sample prior to the SBSE method, solvent extraction or ultrasound-assisted solvent extraction was performed. methanol was used as the extraction solvent. The extract was then diluted with water. Finally, the sample was subjected to SBSE. A method for fast screening of crop protection agents in tobacco using SBSE-TD - GC/MS has been developed. About 17 CPAs including organochlorine, organophosphorous and others were identified and quantified. This method showed good linearity and high sensitivity for most of the target CPAs. The method was applied to the determination of CPAs at ng/mL levels in tobacco sample. This method is simple, rapid and may be applied in detection of other components.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.41 no.2
• /
• pp.36-44
• /
• 2020

Mulberry root bark is one of potential plant sources for antioxidant materials which can be used for the relief of oxidative stress. To explore the effects of solvent type and temperature on the structural characteristics and antioxidant activity of the root bark extracts, we prepared various extracts of mulberry root bark (Morus alba L.) using 0 - 100 % ethanol (EtOH) at RT - 100℃. EtOH concentration and temperature critically affected the extraction yields, the content of bioactive components, and antioxidant activity of the extracts. Use of high content of EtOH solvent and low temperature resulted in the low extraction yield. Meanwhile, it was revealed that the extract prepared using absolute EtOH at room temperature contained polyphenols and flavonoids with the highest contents among other extracts. Interestingly, the temperature differently affected the polyphenol and flavonoid contents according to the solvent types. In the case of 30% EtOH solvent, polyphenol and flavonoid contents increased with an increase in temperature, whereas in the case of 70 and 100 % EtOH, these contents decreased. Using the radical scavenging assay, it was confirmed that the 100% EtOH extracts had higher antioxidant activity compared to distilled water (DW) extracts regardless of temperature. Also, heating might extract more antioxidant components from the root bark. Especially, the extract prepared using 30% EtOH solvent at 100℃ showed the highest antioxidant activity. Taken together, these experimental results imply that the extraction parameters should be designed carefully considering the productivity, the extracted bioactive components, and antioxidant activity.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.58-61
• /
• 2012

The solvent extraction of platinum (IV) metal from hydrochloric acid media using 4-(4-ethoxybenzylideneamino)-5-methyl-4H-1,2,4-triazole-3-thiol (EBIMTT) in chloroform was studied as a function of several variables, such as reagent, acid and metal ion concentration, effect of various diluents, and diverse ions. The proposed method was further applied for the separation of platinum (IV) from binary mixtures, synthetic mixtures, alloys and commercially available samples.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.502-505
• /
• 2005

This study was concentrated to investigate the dependency of recovery yield on the extraction conditions. From fruiting body, the extracted amount of polysaccharide was studied with various solvent. In order to maximize the yield, the optimum extraction conditions were elucidated with respect to solvent, temperature and time. In addition, the dialysis was applied to obtain the higher purity of polysaccharide with varying the exposure time.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.299.2-300
• /
• 2003

Various bupivacaine-Ioaded microspheres were prepared with poly (d,l-Iactide) (PLA) by solvent extraction method. The internal solution of polymer(PLA R104) and drug in glacial acetic acid was introduced into the external phase of polyvinylpyrrolidone (PVP K-30) in polyethyleneglycol (PEG), and emulsified to be an oil-in-oil (o/o) emulsion. The o/o emulsion was poured to the buffer solution. (omitted)

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.871-877
• /
• 2012

This study investigated the effects of temperature, solvent concentration, and pH on the ${\beta}$-glucan extraction. Oat bran ${\beta}$-glucan was extracted with different extraction conditions, using various combinations of experiment factors, such as temperature (40, 45, 50, 55, and $60^{\circ}C$), ethanol concentration (0, 5, 10, 15, and 20%), and pH (5, 6, 7, 8, and 9). Under the various extraction conditions, ${\beta}$-glucan extraction rate and overall mass transfer coefficient of oat bran ${\beta}$-glucan, and viscosity of oat bran extracts were investigated. As increasing the extraction time, the extraction rate of ${\beta}$-glucan increased. The overall mass transfer coefficient of ${\beta}$-glucan ranged from $3.36{\times}10^{-6}$ to $8.55{\times}10^{-6}cm/min$, indicating the lowest at the extraction condition of $45^{\circ}C$, 15% and pH 8, and the highest at $50^{\circ}C$, 0% and pH 7. It was significantly greater with increasing extraction temperature and decreasing ethanol concentrations of extraction solvent, except for solvent pH. There were positive correlations among the overall mass transfer coefficient, the extraction rate of ${\beta}$-glucan, and the viscosity of extract.