• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.436-445
• /
• 1986

As the second part of the studies on the utilization of polyunsaturated lipids in sardine oil as nutritional or medical supplement, the conditions of lipid extration and concentration, refining, and storage stability of EPA-condensed sardine oil were investigated. In extraction of lipids, solvent ratios of chloroform-methanol mixture(2:1 v/v) affected the final content of unsaturated lipid in extracted oil and recovery. Stepwise solvent fractionation method at various low temperatures was effective to concentrate polyenoic acids like EPA and DHA when acetone or acetone-methanol mixture, added in the ratio of 1:5 (v/v) was applied step by step to different temperatures at 0 to $-35^{\circ}C$. Addition of 1 to $5\%$ (v/v) of water to acetone was also benefit to raise EPA content but that resulted in reducing the yield of condensed oil from $65\%\;to\;28\%$. Concentration rate of polyenoic acids by solvent fractionation in lipid-actone solution (1:5, v/v) at 0 to $-30^{\circ}C$ seemed limited to $5{\sim}8\%$ in fatty acid composition depending on the initial content of those polyenoic acids in the sardine oil. During the extraction, concentration, and alkaline treatment, oxidation was rapidly induced but oxidation products could be thoroughly removed on the process of deceleration and peroxide elimination. To stabilize the reactive polyenoic acid condensed oil during the storage, stuffing nitrogen gas was essential to expel dissolved oxygen in oil or to seal the oil from open air, and the addition of antioxidative agents as BHA and tocopherols were greatly helpful to extend the storage life.

• Microbiology and Biotechnology Letters
• /
• v.42 no.3
• /
• pp.258-266
• /
• 2014

Sweet potato soju (SPS), a form of traditional distilled alcoholic liquor in Korea, is manufactured by the distillation of fermented broth under normal pressure, thus providing it for a uniquely smooth taste infused with the flavor of sweet potato. After distillation, the lees of SPS is produced as by-product and discarded. In this study, the ethanol and hot water extracts of lees of SPS, and their subsequent organic solvent fractions using hexane, ethylacetate (EA), butanol, and water residue were prepared in an effort at the efficient re-use of the lees of SPS. The ethanol extraction yield was 1.36-fold higher than that of the hot water extraction, and the EA fraction revealed the highest total polyphenol content among the solvent fractions. The various extracts and solvent fractions did not demonstrate hemolytic activity at up to 0.5 mg/ml concentrations against human red blood cells. In the bioactivity assay, only the EA fraction displayed a broad spectrum of anti-microbial activity against different pathogenic and food spoilage bacteria, and demonstrated significant anti-coagulation activity by inhibitions of thrombin, prothrombin and blood coagulation factors. Furthermore, only the EA fraction from the hot water extract of the lees of SPS showed anti-platelet aggregation activity, which is comparable to aspirin (a commercially available drug). Our results suggest that the EA fraction of the hot water extract prepared from the lees of SPS has a high potential as a novel resource for anti-microbial and anti-thrombosis agents.

• Journal of Life Science
• /
• v.33 no.5
• /
• pp.383-390
• /
• 2023

The goal of this study was to identify new bioactive peptides in extracts derived from Tenebrio molitor (T. molitor) larvae for the development of functional foods. After extraction from freeze-dried T. molitor larvae with various solvents on time course, the extracts showed the highest 2,2,1-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity at 5 and 10 hr per total protein and solid contents, respectively. When the water extract was fractionated, a high methanol concentration led to a reduced level of high-molecular-weight proteins in the centrifugal supernatant, whereas increased DPPH activity in the supernatants suggests low-molecular-weight peptides may mediate antioxidant activity in the supernatant. Most of the organic solvent partitions, excluding butanol, showed similar activities in the water phases, and the organic solvent partition fraction exhibited a 28~44% decrease in activity following heat treatment, implying that some components in the fraction become unstable in the presence of heat. The addition of proteinase K to the water extract increased DPPH activity by 10~20%, suggesting that peptides, when released from total proteins, partially increase antioxidant activity. Therefore, we suggest that the antioxidants in T. molitor larval extracts make them a potential source of functional animal food.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.334-341
• /
• 2000

The DMPT produced by marine algae is the main biogenic precursor of oceanic DMS. Also, DMPT is an efficient stimulant for growth, feeding, and body movement of fish and striped prawn, and appears to play a physiologic role as an osmoprotectant in algae. This study was focused on the extraction of dimethyl-$\beta$-propiothetin as bioactive substance from green seaweed. Identification and quantification of dimethyl-$\beta$-propiothetin were measured by headspace gas chromatography after conversion to dimethyl sulfide by treatment with saturated NaOH solution. Dimethyl-$\beta$-propiothetin was extracted through various processes(solvent extraction, ultrasonication, boiling and autoclaving) from Enteromorpha intesinalis. The content of dimethyl-$\beta$-propiothetin extracted by autoclaving treatment showed higher than those of various extraction methods. Dimethyl-$\beta$-propiothetin content in extract of Enteromorpha Enteromorpha was 311,200ng/g after autoclaving at 121$^{\circ}C$ for 60min. Dimethyl-$\beta$-propiothetin in extract of Enteromorpha intestinalis was comparatively stable under low temperature. The retentions of dimethyl-$\beta$-propiothetin content in extract of Enteromorpha intestinalis were 75.8 ~99.8% by incubation at 10~6$0^{\circ}C$ for 2 hours. Chemical decomposition of dimethyl-$\beta$-propiothetin was observed under laboratory conditions at pH values higher than 9.5.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1543-1549
• /
• 2015

Black rice bran, a by-product from rice milling process, is a good natural source of anthocyanin pigment. The purpose of this study was to determine the optimum conditions for anthocyanin extraction from black rice bran as well as the stability of anthocyanin extract according to different storage temperatures. The main anthocyanin in 'Heugkwang' rice bran was identified as cyanidine-3-glucoside (C3G) by HPLC and LC-MS/MS. The yield and C3G content of black rice bran extract were investigated with various extraction solvents, temperatures, and times. The results indicate that the optimum extraction solvent, temperature, and time were 50% ethanol, $70^{\circ}C$, and 2 h, respectively. The stability of anthocyanin extract was studied during a storage period of 168 days at various temperatures ($-20^{\circ}C$, $4^{\circ}C$, and room temperature). Hunter's values (L, a, and b) of anthocyanin extract increased, whereas C3G content continuously decreased up to 168 days. Variations in Hunter's values and C3G content become larger as storage temperature increased. Anthocyanin extract from black rice bran was very stable, as C3G content after storage at all temperatures was maintained at more than 90% of initial content. These results suggest that anthocyanin extract from black rice bran may be useful as a natural food colorant.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.148-153
• /
• 2010

This study was carried out to investigate the effect of extraction methods on the physicochemical characteristics using seed oil of wild green tea (Camellia sinensis). When the solvent extraction method after grinding and steam treatment (SGS) was used for oil extraction, the yield was highest. The specific gravity was a range of $0.91{\sim}0.94g/cm^{3}$ irrespective of extraction methods of oil. However, the light in the solvent extraction method after grinding (SG), the red in the pressure extraction method after grinding and roasting treatment (PGR), and the yellow in SG method were highest. Among various fatty acids, the concentrations of C16 : 0, C18 : 1 and C18 : 2 were highest, irrespective of extraction methods. Especially, the C16 : 0 concentration was in the order of SG (34.78%), SGS (23.04%), and PRGS method (23.01%), the C18 : 1 concentration was in the order of PGR (43.35%), SGS (42.7%), SG method (39.0%), and in the case of C18 : 2, it was in order of PGR (23.15%), SGS (23.03%), and SG method (15.01%). The saturated fatty acid concentration was in the order of SG (40.59%), PGR (31.61%), and SGS method (30.1%). On the other hand, in the case of the unsaturated fatty acid, it was in the order of SGS (69.9%), PGR (68.39%), and SG method (59.41%). The acid values in the SGS and SG method after 10 days of storage were in the range of 6~8 mgKOH/g. However, in the case of PGR method, it was increased with the increase of storage time and was 49.3 mgKOH/g after 60 days. The peroxide values in the SGS and SG method were in the range of 60~100 mEq/g from 10 to 60 days of storage. On the other hand, when the storage time was increased from 10 to 30 days, it was sharply increased from 60 to 240 mEq/g. The rancidity was in the order of $Fe^{2+}$, $Cu^{2+}$, $Cr^{2+}$, $Zn^{2+}$ and $Ni^{2+}$, irrespective of extraction methods. Especially, when butylated hydroxyanisole (BHA) was added into oil containing 1.0 ppm of <$Fe^{2+}$, the peroxide value was decreased from 539.4 to 216.6%. These results show that seed oil of Camellia sinensis grown in Iksan can be applied as sources for cosmetics, detergents, food, and pharmaceuticals.

• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.14-22
• /
• 1980

White and black sesame produced in Korea were defatted with ethyl ether or n-hexane. Defatted sesame meal was extracted with water and salt solution, and protein extraction was precipitated at various pH 1 through 12, with trichloro acetic acid (TCA), tannic acid and ammonium sulfate, respectively. Protein was purified by Sephadex A-25, G-75, G-100 and G-200, and identified its protein fraction by polyacrylamide gel electrophoresis. Amino acids composition of protein in white sesame was analyzed by automatic amino acid analyzer. Protein contents of white sesame, black sesame and sesame meal are 20.5%, 19.2%, and 44.7%, respectively. n-Hexane was the most suitable solvent for extraction of oil from sesame. Crude protein precipitation was better in higher pH. The protein extraction was more effective with the solution containing sodium chloride tinder the pH 8. Globulin in total protein was high and prolamin was less than in other cereal proteins. Glutamic acid contents of white sesame and sesame globulin were 17.1%, and 20%, respectively. Both proteins contained relatively high levels of essential amino acids. 12-13 bands were found in water soluble protein and 2 bands in salt soluble protein were detected by the disc gel electrophoresis, and were identified in both of white and black sesame. The salt soluble protein of white sesame could be purified by Sephadee G-100 and G-200.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1212-1219
• /
• 1999

The oils were extracted from the mixture of roasted(for 20 min at 190oC) perilla seeds(RPS) and roasted (commercially) peanuts(RPN) by solvent extraction(SE) and mechanical expression(ME). The effects of mixing ratio on physicochemical characteristics and oxidative stability of their oils were investigated. Yields of both SE and ME oils were increased as the RPN ratio in the mixture increased. In all the SE and ME oils, the major fatty acids were oleic, linoleic and linolenic acid, and total saturated fatty acids increased gradually, but total unsaturated fatty acids decreased gradually as the RPN ratio in the mixture was increased. The specific gravity and refractive index of both SE and ME oils decreased as the RPN ratio in the mixture was increased. Acid value, saponification value and iodine value of SE oils decreased as the RPN ratio in the mixture increased, whereas acid value and iodine value of ME oils decreased and saponification value increased. The colors of ME oils were darker brownish than SE oils. The oxidative stability of SE oils was decreased as the RPN ratio in the mixture increased, whereas that of ME oils was increased. Sensory evaluation of all the oils extracted from the mixture with various mixing ratio showed significant differences in flavor, taste, color and overall acceptance(p<0.01). The oil extracted from the mixture of the mixing ratio of 8:2(RPS:RPN) showed slightly higher preference regardless of extraction method.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.660-664
• /
• 2008

In this work, analytical HPLC was utilized to obtain Tanshinone IIA (TIIA) from Salvia Miltiorrhiza Bunge (SMB). The optimum operating conditions were experimentally determined to analyze the TIIA in the pretreated extract. SMB was extracted with the various organic solvents of methanol, ethyl acetate, and ethanol, then the extract was analyzed to compare the amount of TIIA. From the results, the methanol showed the best extraction efficiency of TIIAd. The analysis by $C_{18}$ column was performed. The mobile phase was composed of methanol and water, and the isocratic elution mode was mainly applied. $2.154{\mu}g$ of TIIA/mg of SMB powder was extracted with methanol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6015-6022
• /
• 2013

It has been known that there are large amount of nitric acid and valuable metals, copper in the plating waste solution of automobile wheel. As nitric acid and valuable metals are high price and toxic, they should be recovered for economics and environment. Plating waste was extracted with TBP diluted with kerosene. The concentration of nitric acid in aqueous phase was analyzed by titration method by NaOH solution (0.1~1.0N) and the amount of metals by ICP-MS and ICP-AES. The concentration of copper in plating waste were 76,850 mg/L. The concentration of nitric acid in plating waste was 1.02 M. After three step extraction was performed with 50% TBP, each organic phase was stripped three times with distilled water to obtain 48.1% of nitric acid. Purity of final nitric acid was over 99.9% by ICP analysis. After recovery of nitric acid, copper was extracted with various solvent extractors like PC 88A, D2EPHA, LIX 84 and ISE 106. Among these extractors, 92% of copper was recovered by ISE 106 after 1st extraction and 30% $H_2SO_4$ stripping. Copper ion was reduced with $N_2H_4$ to make metal powders, respectively.