• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1286-1291
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLS) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spital shapes of identical line width, gap and margin. SFCLS were fabricated from YBCO thin films grown on two-inch diameter Al$_2$O$_3$ substrates under the same conditions. The total length of current limiting paths was the shortest at the spital shape due to its larger useless space. Inductance component of SFCLs with the spiral shape was around two times as high as those of other two shapes. This is not desirable since impedance characteristics of existing power systems can be changed. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, hi-spital shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.1
• /
• pp.53-64
• /
• 2014

The main objective of this research was to understand the characteristics of printed geometric patterns through the statistical & qualitative analysis of fashion appeared in contemporary female collections 2011 S/S to 2013 A/W. Data collection of 294 was done through review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of three major fashion cities; Paris, Milan and NY. Statistical analysis of frequency was conducted. Also qualitative interpretation of natural print design' characteristics were completed. The main findings were as followed; 1,636 of the total 15,852 designs were printed patterns in 12 Collections and the occurrence rate of printed geometric patterns in three collections were 8.6% in Milan, 9.2% in Paris and 12.9% in N.Y. Most geometric patterns were the types of compact or medium density in a front patterns with a variety of sizes and mainly applied to the one piece dress or two piece clothing item combination styles. Formative Characteristics of printed geometric patterns were classified into four types. First, a variety of thicknesses and shapes, such as a line or a rectangle shape to take advantage of the types of the typical geometric pattern. Second types were using the motifs which inspired by geometric shapes such as point, circle star and other special geometric shapes and arranging them regularly with various sizes and density. The third was repeated particular motifs which based on complex and sophisticated mathematical formulas. Fourth were the specific diagram types of bold and free shapes or dividing the flat and arranging them without rules, or the combination type of various geometric motifs.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.162-167
• /
• 2006

Hot embossing lithography(HEL) has the production advantage of comparatively few process step, simple operation, a relatively low cost for embossing tools(Si), and high replication accuracy for small features. In this paper, we considered the nano-molding characteristic according to molding parameters(temperature, pressure, times, etc) and induced a optimal molding condition using HEL. High precision nano-patter master with various shapes were designed and manufactured using the DRIE(Deep Reactive ion Etching), LPCVD(Low Pressure Chemical Vapor Deposition) and thermal oxidation process, and we investigated the molding characteristic of DVD and Blu-ray nickel stamp. We induced flow behaviors of polymer, rheology by shapes and sizes of the pattern through various molding experiments. Finally, with achieving nano-structure molding with high aspect ratio, we will secure a basic technology about the molding of large-area nano-pattern media.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.13-22
• /
• 2005

In order to convey exactly what a work is intended to project, it is necessary to select appropriate materials, those whose features are suitable for the work to be accomplished. Among the recent trends in dyeing involve the use of the designers' own techniques and a variety of materials, as well as the designers' efforts at promoting the value of plastic art. According I choose splendid butterfly patterns that diversity in shape and color, among nature patterns offer unlimited imaginative power. I designed the fabric pattern, using tie dyeing, cone dyeing, transfer dyeing and rub dyeing that can best express my intentions. Therefore a total of four works were designed with aesthetically appealing revised shapes of a butterfly, using materials developed using the same method, to suggest the possibility of creating a new design while maintaining the original beauty of plastic art.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.130-134
• /
• 2009

CFD analysis of the fuel injection pattern and the flow field surrounding the liquid propellant injector of a small thruster is performed. A good agreement is shown with PIV test data for the initial configuration. Analysis on various injector shapes is performed to observe the effect of injector shape on the trajectories of liquid droplet. A various shapes of injector is investigated to enhance spray pattern of the small injector.

• Journal of the Korean Society of Costume
• /
• v.62 no.1
• /
• pp.90-103
• /
• 2012

Felt, is one of the Korean traditional woolen fabrics, that is thermally excellent and durable, so it has been widely used for various living goods from the ancient time to the modern society. Felt makes various changes in colors and shapes, does not change easily even after a long-term use, and is easy to clean. In this study, the origin and history of felt were researched. Also, different kinds and shapes of felt and the currently used manufacturing technique, and how the Korean traditional pattern-applied cultural products were developed using felt were examined as well. The method of this study were as follows. First, felt manufacturing techniques used after investigating the precedent studies, books, records and literatures of museums, the existing relics of felt were examined. Second, the conditions of the traditional pattern-applied cultural products were found out through the precedent studies after examination of kinds and symbols of the Korean traditional patterns. Third, patterns that were applied to cultural products were selected and designed with new patterns. Fourth, the past techniques were conducted with the following three methods by referring to the range of cultural products manufacturing; )color felt made with one color, pattern felt, and pattern-embroidered felt. Fifth, the following products combined with decoration and practical application by applying felt techniques were used. This study was aiming at the development of practical cultural products made with the traditional wool, felt, which can receive a good response from all age groups. It is allegedly required to develop various cultural products through studies and the rediscovery of the national traditional materials. In the future, it is necessary to study in such a way that diversification and differentiation are made through approaches and attempts with various techniques.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.529-532
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLs) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spiral shapes of identical line width, gap and margin. SFCLs were fabricated from YBCO thin films grown on two-inch diameter $Al_2O_3$ substrates under the same conditions. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, bi-spiral shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.55-56
• /
• 2006

In prevention and diagnostic system of GIS, pattern classification is focused on the detection of unnatural patterns in PD(Partial discharge) image data. Fractals have been used extensively to provide a description and to model mathematically many of the naturally occurring complex shapes, such as coastlines, mountain ranges, clouds, etc., and have also received increased attention in the field of image processing, for purposes of segmentation and recognition of regions and objects present in natural scenes. Among the numerous fractal features that could be defined and used for image data, fractal dimension and lacunarity have been found to be useful for recognition purposes Partial discharge(PD) occuring in GIS system is a very complex phenomenon, and more so are the shapes of the various 2-d patterns obtained during routine tests and measurements. It has been fairly well established that these pattern shapes and underlying defects causing PD have a 1:1 correspondence, and therefore methods to describe and qunatify these pattern shapes must be explored, before recognition systems based on them could be developed. The computed fractal features(fractal dimension and lacunarity) for standard library of PD data were analyzed and found to possess fairly reasonable pattern discriminating abilities. This new approach appears promising, and further research is essential before any long-term predictions can be made.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.2
• /
• pp.273-286
• /
• 2016

Protective coveralls are very uncomfortable to work in comparison to ordinary top and bottom separated clothing. A pattern maker has to consider the size of the human body and human motion range when designing protective coverall patterns. It is difficult to produce well-fitted coveralls because of the lack of readymade patterns despite the increased need for protective coveralls at various jobs. Patterns are decomposed by unsewing 18 products in the domestic market to provide the fundamental information on developing patterns for protective coveralls. The characteristics and differences of pattern types are compared after grouping patterns with information taken from the analysis of the shapes and measurements of patterns from the acquired patterns. The results of the analysis showed that on-market protective coveralls were less curved but much linear when compared to ordinary clothing patterns; however, the breasts and crotch circumferences were very loose and bulky, which is quite different from the other all-in one style working clothes. For the pattern shapes, patterns are classified into waistline-seamed and bustline-seamed types. The result of the hierarchical cluster analysis with 27 measurement variables were classified into four groups. Types by shape and measurements were related to each other; therefore, we expect the information of each type to be used in developing protective clothing patterns.