• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.115-121
• /
• 2006

본 논문에서는 다양한 형태의 케이블 요소들의 거동이 강사장교의 극한강도에 미치는 영향을 검토하였다. 연화소성힌지 모델을 사용한 극한강도 평가 시 보-기둥 부재의 기하학적 비선형은 안정함수를 사용하여 고려하였고 재료적 비선형성을 반영하기 위하여 CRC 접선계수와 포물선 함수를 사용하였다. 케이블 부재는 새그의 영향이 고려되었다. 연구 결과 등가탄성계수가 반영된 등가트러스 요소를 사용한 경우 강사장교의 극한강도가 케이블 요소 또는 현수선 요소를 사용하여 평가한 극한강도 보다 안전측으로 평가되었다.

• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.575-597
• /
• 2006

Enhanced three-dimensional finite elements for geometrically nonlinear analysis of cable-supported structures are presented. The cable element, derived by using the concept of an equivalent modulus of elasticity and assuming the deflection curve of a cable as catenary function, is proposed to model the cables. The stability functions for a frame member are modified to obtain a numerically stable solution. Various numerical examples are solved to illustrate the versatility and efficiency of the proposed finite element model. It is shown that the finite elements proposed in this study can be very useful for geometrically nonlinear analysis as well as free vibration analysis of three-dimensional cable-supported structures.

• Interaction and multiscale mechanics
• /
• 제1권3호
• /
• pp.381-396
• /
• 2008

The aerostatic instability of cable-supported bridges is studied, with emphasis placed on modeling of the geometric nonlinear effects of various components of cable-supported bridges. Two-node catenary cable elements, which are more rational than truss elements, are adopted for simulating cables with large or small sags. Aerostatic loads are expressed in terms of the mean drag, lift and pitching moment coefficients. The geometric nonlinear analysis is performed with the dead loads and wind loads applied in two stages. The critical wind velocity for aerostatic instability is obtained as the condition when the pitching angle of the bridge deck becomes unbounded. Unlike those existing in the literature, each intermediate step of the incremental-iterative procedure is clearly given and interpreted. As such, the solutions obtained for the bridges are believed to be more rational than existing ones. Comparisons and discussions are given for the examples studied.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.151-158
• /
• 2000

Cable dome that consists of three component such as cable, strut and fabric membrane has complex structural characteristics. Main structural system of cable dome is cable-strut tensegric system and fabric membrane element is conceived as cladding roof material. One of the important problem of cable dome is to investigate the structural response from external load effect such as snow and wind. When cable dome is subjected to load each structural component has various special structural characteristics. One is that geometrical nonlinearity should be considered because large deformation is occurred from their flexible characteristic. The other is that wrinkling occurs occasionally because cable and membrane elements can not transmit compressive forces. So this paper researches the physical structural response of cable dome structure and the structural behavior when failure occurred at a part of structure.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.700-704
• /
• 2011

This paper proposes a coordinative protection study results of 22.9kV HTS(High-Temperature Superconducting) cable implemented distribution system. HTS cable can provide about 5 times larger transfer capacability compare to conventional XLPE cable, however, it has different heat characteristic so called quench. This paper presents the simulation results on Ichun substation HTS cable which connects main transformer and 22.9kV bus. Various expected fault cases are considered and discussed to examine whether conventional protection scheme is effective to protect both of existing facilities and HTS cable. With the results of simulation, conventional protection scheme can be used if instantaneous element and time inverse elements could be adjusted with proper time coordination. Internal temperatures of HTS cable conductor in safe region with proper protection without quench. This results are to be demonstrated by the field test and will be implemented in Ichon substation HTS cable protection and control system.

• 한국공간구조학회논문집
• /
• 제5권4호
• /
• pp.79-90
• /
• 2005

본 연구의 주 목적은 다양한 요인에 의해 케이블-막구조물에 요소이동이 발생할 때, 당초 해석 시 가정되었던 좌표나 응력상태의 변화에 대해 막과 케이블 사이에 발생하는 요소이동의 방향이나 크기를 산정하고, 요소이동이 발생한 후 응력상태의 변화를 규명하는 것이다. 먼저 케이블 보강 막구조물의 요소이동 문제를 해석하기 위한 이론적 배경인 ALE 유한요소법의 개념을 소개하고, ALE 개념이 도입된 케이블-막구조물에서의 요소이동을 고려한 강성매트릭스를 작성하여 해석 프로그램을 개발한다. 개발된 프로그램의 타당성을 검증하기 위해 다양한 예제 해석을 수행한다.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.449-457
• /
• 2005

다양한 케이블지지 시스템에 적용이 가능한 슬라이딩을 허용하는 다절점 케이블-트러스 요소를 개발한다. 먼저 일반적인 2절점 케이블-트러스 요소에 대한 유한요소 정식화 과정을 요약하고, 이를 토대로 여러 절점에 연결되어 장력은 동일하지만 절점에서 슬라이딩이 가능한 다절점 케이블-트러스 요소의 탄성강도행렬을 유도한다. 개발된 케이블-트러스 요소를 검증하기 위하여, 케이블 장력을 부정정력으로 선택하고 적합조건을 이용하여 장력을 산정하는 방법(유연도법)을 제시하고 두 방법에 의한 장력 값을 비교한다. 또한 상용 유한요소 해석프로그램의 2절점 트러스요소를 사용한 해석결과와도 비교, 분석한다.

• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.36-45
• /
• 1999

The basic idea of cable-stayed girder bridges is the utilization of high strength cables to provide intermediate supports for the bridge girder so that the girder can span a much longer distance. In the cable-stayed bridge, the cables exhibit nonlinear behavior because of the change in sag, due to the dead weight of the cable, which occurs with changing tension in the cable resulting from the movement of the end points of the cable as the bridge is loaded. Techniques required for the static analysis of cable-stayed bridges has been developed by many researchers. However, little work has been done on the dynamic analysis of such structures. To investigate the characteristics of the dynamic response of long-span cable-stayed bridges due to various dynamic loadings likes moving traffic loads. two different 3-D cable-stayed bridge models are considered in this study. Two models are exactly the same in structural configurations but different in finite element discretization. Modal analysis is conducted using the deformed dead-load tangent stiffness matrix. A new concept was presented by using divided a cable into several elements in order to study the effect of the cable vibration (both in-plane and swinging) on the overall bridge dynamics. The result of this study demonstrates the importance of cable vibration on the overall bridge dynamics.

• 한국공간구조학회논문집
• /
• 제16권2호
• /
• pp.89-96
• /
• 2016

Cable structures are lightweight structures of flexible type, cable members have only axial stiffness related to tension, they can carry neither bending nor compression. This study is the analysis of cable truss systems are composed of upper and low cables by connecting bracing cables, the structural principle is based on a tensegrity system by using bracing tension members, discontinuous compression members and continuous tension members. A hanging roof of cable truss system is too flexible against vertical loads, most cable members are stabilized by connecting the prestressed upper and lower cable by bracing cables. A cable truss roof system is formed by adding a set of cables with reverse curvature to the suspension cables. With the sets of cables having opposite curvature to each other, cable truss is able to carry vertical load in both upward and downward direction with equal effectiveness, and then a cable truss acts as load bearing elements by the assemble of ridge cables, valley cables and bracing cables. This paper will be shown the geometric non-linear analysis result of cable truss systems with various sag ratio for deflections and tensile forces, the analytical results are compared with the results of other researchers.

• 한국강구조학회 논문집
• /
• 제12권6호
• /
• pp.661-670
• /
• 2000

다양한 이동하중을 받는 3차원 사장교에서 동적응답을 구하고자 동일 제원을 갖는 사장교 해석모델에 대하여 두 가지 케이블요소를 적용하여 케이블의 면외 진동영향을 포함한 경우를 알아보고자 하였다. 특히 사장교와 같은 전 구조체계가 유연성을 갖는 구조에서는 사용하중하에서도 동적응답이 민감할 것으로 가정하고 주탑, 바닥판을 연결하는 케이블의 유연성을 포함하여 거동을 파악하고자 하였다. 또한 진동해석시 정적비선형해석을 통한 기하강도행렬과 접선강도행렬을 연계하여 수행하였으며 특히 케이블을 다수의 요소로 분할한 경우에서 단일 케이블요소로 고려되는 축방향진동 이외의 다양한 진동모우드를 나타내고 이러한 면내, 면외진동의 영향이 주탑 및 바닥판과의 상호 연성관계를 통한 추가적인 거동을 유발함을 알 수 있었다. 또한 케이블의 진동영향을 고려한 경우 비대칭 편도의 이동하중을 적용하여 바닥판의 회전각을 비교할 경우에도 케이블의 횡진동의 영향이 전체구조의 추가적인 동적응답을 나타냄을 볼 수 있었다.