• KSBB Journal
• /
• v.13 no.2
• /
• pp.119-124
• /
• 1998

Twelve bacterial strains capable of growing on phenol minimal medium were isolated from iron foundry activated sludge by enrichment culture, and amount them, one isolate which was the best in cell growth and phenol degradation was selected and identified as Acinetobacter junii POH. The optimal temperature, initial pH and phenol concentration in the above medium were 3$0^{\circ}C$, 7.5 and 1000 ppm, respectively. Cell growth of Acinetobacter junii POH dramatically increased 20 hrs cultivation-time and reached a almost stationary phsae 40 hrs cultivation-time then phenol was degraded about 98%. Cell growth was inhibited y phenol at concentrations over 1500 ppm. The isolate was resistant to several antibiotics as well as various heavy metal ions. The growth-limiting log P value of Acinetobacter junii POH on organic solvents was 2.9 in the LB medium. Therefore, it is suggested that Acinetobacter junii POH could be effectively used for the biological treatment of wastewater containing the presence of heavy metal ions and organic solvents.

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.269-274
• /
• 1997

Solubilities of oleanolic acid and ursolic acid in aqueous surfactant solutions, liquid polyethylene glycols (PEG), and solvents of various polarity were measured. The results showed that the solutes were slightly or moderately solubilized in the surfactant solutions and the liquid PEGS. It was also revealed that the solutes were slightly soluble in the solvent of either extreme polarity or nonpolarity, but moderately soluble in solvents of intermediate polarity of which solubility parameters are around 10. The solubility parameters of these solutes were calculated from the group contribution to be 10.2 for both of them. Of the solvents tested, tetramethylurea was exceptionally effective in solubilizing the solutes. The solutes were also moderately soluble in the aqueous cosolvents containing tetramethylurea. This suggests that the mixed systems of tetramethylurea could be employed for the solubilization in the formulation of these compounds as an aqueous system.

• Clean Technology
• /
• v.22 no.4
• /
• pp.269-273
• /
• 2016

The benzylic bromination of methoxyimino-o-tolyl-acetic acid methyl ester (1) into (2-bromomethyl-phenyl)-methoxyimino-acetic acid methyl ester (2) using N-bromosuccinimide in the presence of 2,2'-azobisisobutyronitrile in various reaction solvents were investigated. The efficiency of the reaction was found to be sensitive to the kind of reaction solvents. We found the benzylic bromination of 1 to 2 can be performed in 1,2-dichlorobenzene as reaction solvent superior to the classic Wohl-Ziegler procedure in both reaction time and isolated yield (8 h vs 12 h, 92 vs 79%). This system provides clean, rapid, and high-yielding reactions with replacement of conventional solvents, such as tetrachloromethane, by less-toxic 1,2-dichlorobenzene.

• Journal of the Korean Ceramic Society
• /
• v.50 no.4
• /
• pp.294-300
• /
• 2013

The effect of chemical treatments of porous silicon in organic solvents on its nanostructural and optical features was investigated. When the porous Si was dipped in the organic solvent with various PH values, the morphological, chemical, and structural properties of the porous silicon was sensitively affected by the chemical conditions of the solvents. The size of silicon nanocrystallites in the porous silicon decreased from 5.4 to 3.1 nm with increasing pH values from 1 to 14. After the samples were dipped in the organic solvents, the Si-O-H bonding intensity was increased while that of Si-H bonding decreased. Photoluminescence peaks shifted to a shorter wavelength region in the range of 583 to 735 nm as the pH value increased. PL intensity was affected by the size as well as the volume fraction of the nanocrystalline silicon in the porous silicon.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.1-6
• /
• 2013

The ionic liquids are known to potential alternative solvents capable of replacing the commercial solvents in various processes including those in nuclear fuel cycle. As to the material, a number of studies have already reviewed the interesting results and addressed the spectroscopic as well as electrochemical behaviors of metal elements included in spent nuclear fuels. It has found that the important properties of metal ions in TBP dissolved ILs have led the development of alternative technologies to traditional solvent extraction processes. On the other hand, the electrochemical deposition of metal ions in ILs have been investigated for the application of the solvents to aqueous as well as to non-aqueous processes. In this work, a review on the application of ILs in nuclear fuel cycle is briefly presented to understand the notable researches on ILs focusing on aqueous processes.

• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.1-7
• /
• 1990

The cleaning resistance of tanned chrome garment leathers was investigated by using drycleaning solvents. Hydrocarbon, perchloroethylene and fluorocarbon (F-113) were used as solvent. Various test methods, such as color difference test, surface view by scanning electron microscope, mechanical properties measured by KES-FB System and their hand values and wearing abilities are carried out in this study. The results can be obtained as follows: 1. Fluorocarbon type (F-113) was demonstrated a suitable solvent for drycleaning of leather. 2. Perchloroethylene showed the worst in fading and stiffening among three different types of solvents.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.128-131
• /
• 1996

From Raman spectra, the ${\nu}g$C=O frequencies of 4-substituted benzaldehydes were found to correlate with the ${\sigma}_p$ values of the 4-x atom or group as well as the acceptor number (AN) values of solvents. In various solvents, the ${\nu}g$C=O frequency of benzaldehyde decreased upon the increase of benzaldehyde concentration. This shift was mainly due to the hydrogen bonding between the carbonyl oxygen and/or aldehydic proton of benzaldehyde and the solvent molecules. Over the 1-80 volume % change, the ${\nu}g$C=O frequency of benzaldehyde down shifted from 1709.4 $cm^{-1}$ to 1700.2 $cm^{-1}$ in CCl4 solution and from 1703.0 $cm^{-1}$ to 1698.0 $cm^{-1}$ in $C_2H_5OH$ solution. This is due to the fact that hydrogen bonding between the benzaldehyde and C2H5OH was much stronger than that between the benzaldehyde and the other solvents.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.341-344
• /
• 1987

The fluorescence quantum yield of khellin is sensitive to temperature and to the nature of solvents, especially the proton-donating ability in solute-to-solvent hydrogen bonding. The intersystem crossing quantum yields are 0.4 and 0.15 in acetonitrile and ethanol, respectively. The fluorescence quantum yields in ethanol and isopentane at 77 K are 0.61 and 0.07, respectively, both of which are much larger than the values at room temperature. The phosphorescence lifetime is relatively long and decreases with decreasing solvent polarity. The phosphorescence to fluorescence quantum yield ratio is very small and remains unchanged in various solvents. The results suggest that internal conversion is an important decay channel of the excited singlet state of khellin, especially in the hydrogen-bonding hydroxyl solvents.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.406-412
• /
• 1998

Such extraction conditions as the kinds of solvent, extracting temperature, extracting time, ratio of material to solvent and particle size of material, were studied to maximize the extraction of oleoresin from chipi. Larger amount of soluble solids were extracted from seeds with nonpolar solvents (hexane, pentane, ether) for extraction, because the seeds contained large amount of crude fats and monoterpene(limonene) volatile compounds. Larger amount of soluble solids were extracted from peel with polar solvents(methanol, ethanol) of extraction because of large amount of water soluble colors, sugars and oxygenated terpene bolatile compounds in the peel. The application of the solvents in intermediate polarity (dichloromethane, acetone) resulted in more effective extraction of soluble solid and volatile compounds. Expecially, dichloromethane was an excellent solvent in extraction of volatile compounds. In the concern of volatile compound recovery yield, the optimum extraction conditions, such as temperature, time, mixing ratio of material to dichloromethane and mean particle size, were $25^{\circ}C$, 10min, 1:10(w/v), 355~250${\mu}{\textrm}{m}$ for chopi peels and 3$0^{\circ}C$, 10min, 1:8(w/v), 355~250${\mu}{\textrm}{m}$ for chopi seeds, respectively.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.3
• /
• pp.11-14
• /
• 2018

$MgB_2$ superconducting properties have been investigated with the surface-treated boron powders using the chemical solvents. Various solvents were used such as acetone, ethanol, methanol, and water to possibly modify the surface condition of raw boron powders as received. This treatment was done at an argon gas environment inside the glove box to reduce the further contamination during and after chemical treatments. It was found that $T_c$ values were increased to 37.58-37.73 K from the pure sample of 37.50 K when they were treated in inert environment. High- fields $J_c$ at both 5 & 20 K was all increased regardless of any kinds of chemical treatments mentioned above. It is also noted that the $J_c$ at low-fields were increased in the order of solvents: ethanol > acetone > pure $MgB_2$ = methanol > water.