• Journal of Electrochemical Science and Technology
• /
• v.12 no.4
• /
• pp.424-430
• /
• 2021

The element iron (Fe) is affordable and abundantly available, and thus, it finds use in a wide range of applications. As regards its application in rechargeable lithium-ion batteries (LIBs), the electrochemical reactions of Fe must be clearly understood during battery charging and discharging with the LIB electrolyte. In this study, we conducted systematic electrochemical analyses under various voltage conditions to determine the voltage at which Fe corrosion begins in general lithium salts and organic solvents used in LIBs. During cyclic voltammetry (CV) experiments, we observed a large corrosion current above 4.0 V (vs. Li/Li⁺). When a constant voltage of 3.7 V (vs. Li/Li⁺), was applied, the current did not increase significantly at the beginning, similar to the CV scenario; on the other hand, at a voltage of 3.8 V (vs. Li/Li⁺), the current increased rapidly. The impact of this difference was visually confirmed via scanning electron microscopy and optical microscopy. Our X-ray photoelectron spectroscopy measurements showed that at 3.7 V, a thick organic solid electrolyte interphase (SEI) was formed atop a thin fluoride SEI, which means that at ≥3.8 V, the SEI cannot prevent Fe corrosion. This result confirms that Fe corrosion begins at 3.7 V, beyond which Fe is easily corrodible.

• Journal of Adhesion and Interface
• /
• v.24 no.4
• /
• pp.131-135
• /
• 2023

Lecithin self-assembles into reverse spherical micelles in organic solvents as an amphiphilic molecule. When additives such as bile salts and water are introduced into lecithin solutions, it induces structural changes in the molecular form of lecithin, leading to the transformation into reverse cylindrical micelles. In this study, we observe the rheological changes of lecithin/bile salt mixtures in a decane system after the addition of water. The resulting mixtures exhibit high viscosity and characteristics of viscoelasticity, suggesting potential applications in various fields such as drug delivery and edible oil gels.

• FOCUS: LIFE SCIENCE
• /
• no.1
• /
• pp.5.1-5.3
• /
• 2024

The document discusses the regeneration of Partisil/Partisphere ion-exchange columns in chromatography. It mentions that column efficiency can diminish with use due to the accumulation of sample and/or mobile phase impurities at the head of the column. This can lead to a change in back pressure, lower column efficiency, and sometimes a change in selectivity. The document outlines a procedure that may restore column performance. The document also provides everyday practices to enhance the lifetime of a column. These include using only high-purity HPLC solvents and buffers, using freshly prepared mobile phases and buffers, filtering mobile phases to remove particulates, using appropriate sample clean-up procedures, using a guard column or pre-column filter, and working within the pressure and flow rate limitations of the column. For the regeneration of Partisil/Partisphere SAX, SCX, WAX, and WCX columns, the document suggests passing 20 column volumes of various mobile phases through the column. These include a buffer wash, distilled water, an acid wash, a chelating wash, a methanol wash, and a buffer for separation. The document emphasizes that not all of these wash steps are required for every column clean-up and that some chromatographers require only a combination of certain steps.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.183-187
• /
• 2006

The choice of solvents for electrolytes solutions is very important to improve the characteristics of charge/discharge in the Li-ion battery system. Such solvent systems have been widely investigated as electrolytes for Li-ion batteries. In this paper, the electrochemical properties of the solid electrolyte interphase film formed on carbon anode surface and the solvent decomposition voltage in 1 M LiPF6/EC:MA(x:y) electrolyte solutions prepared from the various mixing volume ratios are investigated by chronopotentiometry, cyclic voltammetry, and impedance spectroscopy. As a result, the solvent decomposition voltages are varied with the ionic conductivity of the electrolyte. Electrochemical properties of the passivation film were different, which are dependent on the mixture ratio of the solvents. Therefore, the most appropriate mixing ratio of EC and MA as a solvent in 1 M $LiPF_6/(EC+MA)$ system for Li-ion battery is approximately 1:3 (EC:MA, volume ratio).

• Korean journal of applied entomology
• /
• v.19 no.3 s.44
• /
• pp.163-168
• /
• 1980

The antibiotic bacterium JS7901, one of the eighty three antibiotic microorganisms which have been is elated in the surburbs of CheongJu-city, showed the most effective antimicrobial activities against test organisms, both bacteria and fungi. Among the different culture media Soytone Sugar medium was the most effective for growth and activity of the JS7901 antibiotic bacterium a against both Escherichia coli and Staphyllococcus aureus by the cylinder plate method. The higher the sugar content, was, the greater the antibiotic amount of substances of JS7901 were produced in the soytone sugar media. The antibiotic bacterium, JS7901 appeared to have a broad activity spectrum showing inhibition in Vitro against gram positive and negative bacteria and plant disease fungi. In general, the active substances were not transferred into organic solvents. Only a small portion of the activity was transferred into ethyl ether and was also adsorbed to active carbon when the cultured broth was also adsorbed to active carbon when the cultured broth was at $pH\;2.0\~4.0$. On adjusting at pH 8.0, the activity disappeared. The crude active substances could be obtained by means of vacuum drying method and still shelved strong activity. The dried active rake was solved by solvents and crystallized into various shapes. The active substances were developed on the silica gel plate in the solvent system of n-butanol-acetic acid-water(3 : 1 : 1) and gave 5 pinkish colored spots when sprayed with $0.2\%$ ninhydrine in ethanol. The upper 5th spot, which was the result of using disc plate method with Escherichia coli was the strongest of these spots.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.18-24
• /
• 2016

Mineral carbonation is a technology for permanently storing carbon dioxide by reacting with metal oxides containing calcium and magnesium. In this study, we used sea water and alkaline industrial by-product such as paper sludge ash (PSA) for the storage of carbon dioxide through direct carbonation. We found the optimum conditions of both sea water content (mixing ratio of sea water and PSA) and reaction time required in the direct carbonation through various experiments using sea water and PSA. In addition, we compared the amounts of carbon dioxide storage with the cases when sea water and ultra-pure water were separately used as solvents in the direct carbonation with PSA. The amount of carbon dioxide storage was calculated by using both solid weight increase through the carbonation reaction and the contents of carbonate salts from thermal gravimetric analysis. PSA particle used in this study contained 67.2% of calcium. The optimum sea water content and reaction time in the carbonation reaction using sea water and PSA were 5 mL/g and 2 hours, respectively, under the conditions of 0.05 L/min flow rate of carbon dioxide injected at $25^{\circ}C$ and 1 atm. The amounts of carbon dioxide stored when sea water and ultra-pure water were separately used as solvents in the direct carbonation with PSA were 113 and $101kg\;CO_2/(ton\;PSA)$, respectively. The solid obtained through the carbonation reaction using sea water and PSA was composed of mainly calcium carbonate in the form of calcite and a small amount of magnesium carbonate. The solid obtained by using ultra-pure water, also, was found to be carbonate salt in the form of calcite.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.163-172
• /
• 2017

The purpose of this study was to measure the bioactivity and antioxidant activity of peel from Gardenia jasminoides Ellis fructus (GJE). GJE have been known to contain functional materials such as crocin, crocetin, geniposide, gardenosid, geniposidic acid, iridoid glycosides etc. We were separated into GJE peel. After that, we determined proanthocyanidin. GJE peel were extracted by 70% methanol, ethyl acetate (EA) and distilled water (DW) of three solvents. To investigate by the solvent extract of flavonoid content and value as a functional food ingredient of GJE peel through antioxidant activities (DPPH radical scavenging activity, ABTS radical scavenging activity, superoxide dismutase like ability, hydroxyl radical scavenging activity, ferrous ion-chelating capacity) were performed. Solvent extract antioxidant activity of increasing concentrations (0.2, 0.4, 0.6 mg/mL) were significantly increased (p<0.05). GJE peel extracts showed lower activity than positive control (ascorbic acid, BHA, EDTA). These results, by a solvent of peel were found that the relationship with the increase of flavonoid content increased physiological activity. The antioxidant activity of the extract from the other except for the EA extract on peel was observed at a high level. The results suggest that GJE peel can be used as nutraceutical foods and natural antioxidant.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.869-876
• /
• 1996

Purification of 2,6-dimethylnaphthalene(2,6-DMNA) from the distillate containing a mixture of dimethylnaphthalene(DMNA) isomers of very high concentration was investigated by crystallization-recrystallization combination as a after-treatment for separation and purification of 2,6-DMNA in the light cycle oil(LCO). The separation of individual isomers of DMNA was studied by crystallization with the distillate as a feed. 2,6-DMNA, 2,7-dimethylnaphthalene(2,7-DMNA) and 2,3-dimethylnaphthalene(2,3-DMNA) were concentrated to crystal, and it was fould that separation between a group of 2,6-, 2,7-, 2,3-DMNA isomers and a group of the other DMNA isomers was possible. However, it was not possible to separate 2,6-, 2,7- and 2,3-DMNA from one another. To select the most suitable recrystallization solvent for purification of 2,6-DMNA, several conventional solvents, which have been employed commercially as recrystallization solvents for high purity performance, were tested, through measurement of solubility of 2,6- and 2,7-DMNA. The solvent used were hexane, iso-propyl ether, ethyl acetate and ethanol. From the solubility results for 2,6- and 2,7-DMNA, ethanol seemed to be the most suitable solvent for purification of 2,6-DMNA. Finally, with crystal recovered by crystallization as a feed and ethanol as a solvent, recrystallization experiments were conducted under various conditions. Purification of 2,6-DMNA was easily done with increasing operating temperature and solvent to feed ratio. These results show that the crystallization-recrystallization combination is an effective one for separation of individual isomers of DMNA.

• Korean Journal of Microbiology
• /
• v.47 no.3
• /
• pp.241-248
• /
• 2011

The use of synthetic additives for preservation and enhancement of the market quality of food products has been emerging as a societal issue in terms of safety as well as changes in consumption patterns. Various research related to natural additives is being conducted to address these issues. This study examined the antibacterial effects of 79 types of medicinal herbs used as oriental remedies on bacteria isolated from beverages of damaged marketable quality. The antibacterial effects of methanol extracts on 13 Bacillus sp. and three Paenibacillus sp. were evaluated. We found that 43 of the herbal medicines analyzed had antibacterial effects on the isolated bacteria. Of those, eight were selected, and their antibacterial effects were further examined using water, ethanol, methanol, and ethyl acetate as solvents. The results revealed that Prunus mume, Rhus javanica, and Coptis japonica had excellent antibacterial effects against the isolated bacteria. In particular, they exerted greater antibacterial effects when water and ethanol were used as solvents. This result indicates the possibility of developing natural additives using these substances. Since P. mume in particular, has not been sufficiently studied compared to other herbal medicines, it presents an opportunity for additional investigation and the possibility for development as a new product in the future.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.1
• /
• pp.110-118
• /
• 2010

Supercritical treatment of liquefaction technology for rice hull was investigated the biomass conversion rate and evaluated its crude oil in respect to feasibility of burner in order to heat the green house. The reaction was carried out in a 5,000 mL liquefaction system with dispenser and external electrical furnace. Raw materials (160 g) of rice hull and 3,000 mL of different solvents were fed into the reactor. It was observed that the maximum crude oil yield was about 84.4 % with 1-butanol. The calorific value of crude oil from ethanol solvent were 7,752 kcal/kg. Furthermore, in case study of co-solvent with ethanol and bulk-glycerol, it observed that more than 80 % of rice hull was decomposed and liquefied in its solvent at $315{\sim}326^{\circ}C$ for 30 min. For the development of applicable bio-fuel from rice hull, it was considered that its feasibility is necessary to be carried out for co-solvent soluble portions. Regarding to utilize the crude oil into burner as fuel, it was observed that its calorific value was lower at approximately 24 % than the diesel. Also, flame length from crude oil at lower temperature was decreasing due to incomplete incineration. The temperature of warm wind on the burner was maintained between 63 and $65^{\circ}C$, and the temperature of emission line was appeared at $350{\sim}380^{\circ}C$.