• KSBB Journal
• /
• v.20 no.3
• /
• pp.228-232
• /
• 2005

In this study, Artemisia mongolica fischer extract was examined for its possible differential inhibitory activity against pathogenic bacteria including Staphylococcus aureus and Lactobacillus spp. isolated from women's vagina. First, seven lactobacillus spp. were selected based on their in vitro high anti-staphylococcal activity. Various samples extracted using different concentrations of organic solvents (acetone, ethanol, methanol) were examined for optimal anti-staphylococal activity. When the Artemisia extract obtained using $100\%$ solvents was added to the cell suspension at $17\%$ (vol/vol), Lactobacillus sp. KLB 224 maintained its viability for 48 hr, whereas S. aureus was completely inactivated showing differential antimicrobial activity of the extract. Using scanning electron microscopy the effect of the extract on the cell morphology was observed: S. aureus showed markedly distorted cell morphology while Lactobacillus sp. KLB 224 appeared to remain intact.

• Journal of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.45-51
• /
• 1985

Rate constants and activation parameters for the methanolysis of t-butyl halide (t-BuCl, t-BuBr, t-BuI) in various MeOH-DMSO mixtures were measured by conductometric method. Taft's solvatochromic parameters, such as polarity-polarizability(SPP's), ${\pi}^{\ast}$, hydrogen bond donor (HBD) acidity, ${\alpha}$, and hydrogen bond acceptor (HBA) basicity, ${\beta}$ of the solvents, were determined by the so called solvatochromic method using five indicators. The variation of methanolysis rate with the solvent composition was discussed on the basis of the activation parameters and the correlation of the rates with the solvatochromic parameters. It is concluded that the polarity-polarizability, HBD acidity and HBA basicity of the mixtures had an effect on the ionization of t-butyl halide cooperatively, also that the specific interaction between the leaving groups and the solvents, such as ion-dipole and hydrogen bond acceptor-donor interaction, is the most important factor of solvent effects on the stabilization of transition states.

• Journal of Environmental Health Sciences
• /
• v.30 no.3
• /
• pp.230-238
• /
• 2004

The adverse health effects of a number of environment pollutions are related to the formation of free radicals. Induction of antioxidant defensive system in the response to an oxidative attack is an essential element of the cell to survive. CYP2E1 is easily induced by organic solvents and induces continuous formation of reactive oxygen species (ROS). ${\gamma}$-Glutamyltranspeptidase (${\gamma}$GT) plays an important role in glutathione metabolism and xenobiotic detoxification. To evaluate the characteristic of oxidative stress which induces GGT expression and to understand human antioxidant defensive response against oxidative stress induced by CYP2E1, we studied regulation of ${\gamma}$GT enzyme expression in response to various oxidative stresses in human HepG2 cells. The ${\gamma}$GT activity was not modified after exposure of acute oxidative stress inducing agents (ferric nitrilotriacetate, cumene hydroperoxide, ADP-Fe, O-tetradecanoylphorbol-13-acetate, tumor necrosis factor-alpha). To induce continuous exposure of cells to ROS, HepG2 cells were transfected by human CYP2E1 gene transiently. The CYP2E1 activity was verified with chlorzoxazone hydroxylation. Transfection of CYP2E1 showed continuous 60% increase in intracellular ROS and 240 % increase in microsomal ROS. CYP2E1 overexpressing cells showed increased ${\gamma}$GT activity (2.5-fold). The observed enhancement of ${\gamma}$GT activity correlated with a significant increase of ${\gamma}$GT mRNA (2.1-fold). Treatment with antioxidant strongly prevented the increase in ${\gamma}$GT activity. The CYP2E1 overexpression did not modify toxicity index and increased glutathione levels. These results show that continuous exposure of cells to ROS produced by CYP2E1 up-regulates ${\gamma}$GT; This may be one of the adaptive antioxidant responses of cells to oxidative insult. Present study also suggests that the induction of ${\gamma}$GT could be used as a marker of oxidative stress induced by exposure to organic solvents.

• Preventive Nutrition and Food Science
• /
• v.19 no.4
• /
• pp.291-298
• /
• 2014

The aim of this study was to investigate the antioxidant activity of orange (Citrus auranthium) flesh (OF) and peel (OP) extracted with acetone, ethanol, and methanol. Antioxidant potential was examined by measuring total phenolic content (TPC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity (RSA), total radical-trapping antioxidant potential (TRAP), oxygen radical absorbance capacity (ORAC), and cellular antioxidant activity (CAA). The comet assay was used to determine the protective effects of OF and OP against $H_2O_2$-induced DNA damage. TPC was highest in the acetone extracts of OF and OP. DPPH RSA was also higher in the acetone extracts than in the ethanol extracts. The DPPH RSA was highest in the acetone extracts of OF. The TRAP and ORAC values of the all extracts increased in a dose-dependent manner. In the TRAP assay, the acetone extracts of OF and OP had the lowest $IC_{50}$ values. In the CAA assay, the methanol and acetone extracts of OP had the lowest $IC_{50}$ values. All of the samples protected against $H_2O_2$-induced DNA damage in human leukocytes, as measured by the comet assay, but the acetone extracts of OP had the strongest effect. These results suggest that acetone is the best solvent for the extraction of antioxidant compounds from OF and OP. Furthermore, the high antioxidant activity of OP, which is a by-product of orange processing, suggests that it can be used in nutraceutical and functional foods.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.109-116
• /
• 1996

The relationship between antioxidant activities and physicochemical properties of several fractions obtained from freeze-dried (FD) coffee were investigated. The nine kinds of fraction were consecutively extracted from FD coffee with solvents in increasing order of polarity, and the higher polarity of the solvent the higher extraction yield of the fraction. The antioxidant activities of the fractions were determined by Rancimat and oven test on edible oils. The antioxidant activities of the fractions increased in the order of acetone>ethanol>methanol>50% methanol/water>water fraction, and the antioxidant activities of them were higher on lard than on soybean oil. The antioxidant activity of each fraction was strongly related to the contents of total phenol, total nitrogen content and acidity, whereas color intensity, reducing power, carboxylic acid content showed little contribution to the activity. All fractions had three peaks maxima at 208, 275 and 324 nm on UV-visible spectra, but the only one at 324 nm was linealy proportional to the antioxidant activities of the fractions.

• Journal of the Korean Chemical Society
• /
• v.37 no.12
• /
• pp.987-994
• /
• 1993

Inductive and resonance effects play an important role in determining carbony) stretching frequencies of ketones. Hydrogen bonding, dielectric effects, and steric effects are all factors which determine the carbonyl stretching frequency, νC=O of ketones in solution. The $ν_{C=O}$ frequencies were shifted by approximately 27$cm^{-1}$ each by substituting to a phenyl group for a methyl group in acetone. The $ν_{C=O}$ frequency for ketones shifted differently in various solvents and increased with increasing the volume ratio of the ketones in water solutions. The $ν_{C=O}$ frequency for ketones shifts continously at constant concentration of ketone in solutions of $(CH_3)_2SO/CCl_4$and$CHCl_3/CCl_4$ with changing of the mole ratio of two solvents. The $ν_{C=O}$ frequency was also affected by changing concentration in either $CCl_4$ or $(CH_3)_2SO$ solution and in either $CCl_4$or $CHCl_3$ solution.

• Journal of Adhesion and Interface
• /
• v.20 no.2
• /
• pp.53-60
• /
• 2019

Stable graphene dispersions in various organic solvents and in water were achieved via noncovalent functionalization of graphene surfaces using different types of commercially available surfactants. Stable dispersions were obtained in short time sonication, 3 h. In NMP, graphene with Tween and Span series, and with Pluronic surfactants showed stable dispersions. In ethanol, nitrogen based surfactants showed stable dispersions. In water and dichloromethane partially stable graphene dispersions were obtained using poly(4-vinyl pyridine) and sodium dodecyl sulfonate surfactants. Large scale productions of stable dispersions were successful using poly(4-vinyl pyridine), poly(vinyl pyrrolidone), and poly(2-(dimethylamino)ethyl methacrylate). Thus, this work will serve as a library to select the surfactants for different solvent systems.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.363-370
• /
• 2021

Organic solvent resistant hollow fiber membranes were fabricated via a thermally induced phase separation (TIPS) method using Polyketone polymer, a material with excellent resistance to organic solvents. The PEG300, DMSO₂ and Glycerine called the "green solvents" were used as diluents for TIPS method. The spherulite structure was formed with DMSO₂ by S-L phase separation behavior whereas the bicontinuous structures were formed with PEG300 and Glycerine, respectively. The morphology of the PK hollow fiber membranes was investigated using SEM. The pure water permeability and the durability test were conducted to understand the permeation properties of PK hollow fiber membranes. The tensile strength test was conducted for the property of mechanical strength. In this study, the fabrication of PK hollow fiber membranes with various diluents was discussed to understand the correlation between diluent and polymer in detail.

• Composites Research
• /
• v.35 no.1
• /
• pp.47-51
• /
• 2022

In order to efficiently control the heat generation of electronic devices, many research has been conducted on thermally conductive composite materials. In this study, milled carbon fiber was dispersed in four solvent to investigate the relationship of carbon fiber alignment according to dispersion by solvents, and carbon fiberreinforced composite material(CFRP) was manufactured using vacuum filtration. To evaluate the arrangement of CFRP the arrangement of the prepared specimen was observed under an optical microscope, and thermal conductivity was measured by Laser Flash Analysis. The Through-plane thermal conductivity of CFRP using NMP and Ethanol was 10.79 W/mK and 10.57 W/mK respectively, which were improved by 218% and 209% compared to the In-plane thermal conductivity. The high viscosity of the solvent greatly affects the shear of the fluid, and it seemed to determine the alignment of the filler.

• FOCUS: LIFE SCIENCE
• /
• no.1
• /
• pp.1.1-1.4
• /
• 2024

This article provides comprehensive guidance on the maintenance, cleaning, regeneration, and storage of silica-based HPLC (High-Performance Liquid Chromatography) columns. The general considerations emphasize the importance of using in-line filters and guard cartridges to protect columns from blockage and irreversible sample adsorption. While these measures help, contamination by strongly adsorbed sample components can still occur over time, leading to an increase in back pressure, loss of efficiency, and other issues. To maximize column lifetime, especially with UHPLC (Ultra-High Performance Liquid Chromatography) columns, it is advisable to use ultra-pure solvents, freshly prepared aqueous mobile phases, and to filter all samples, standards, and mobile phases. Additionally, an in-line filter system and sample clean-up on dirty samples are recommended. However, in cases of irreversible compound adsorption or column voiding, regeneration may not be possible. The document also provides specific recommendations for column cleaning procedures, including the flushing procedures for various types of columns such as reversed phase, unbonded silica, bonded normal phase, anion exchange, cation exchange, and size exclusion columns for proteins. The flushing procedures involve using specific solvents in a series to clean and regenerate the columns. It is emphasized that the flow rate during flushing should not exceed the specified limit for the particular column, and the last solvent used should be compatible with the mobile phase. Furthermore, the article outlines the storage conditions for silica based HPLC columns, highlighting the impact of storage conditions on the column's lifetime. It is recommended to flush all buffers, salts, and ion-pairing reagents from the column before storage. The storage solvent should ideally match the one used in the initial column test chromatogram provided by the manufacturer, and column end plugs should be fitted to prevent solvent evaporation and drying out of the packing bed.