• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.207-212
• /
• 2019

Non-aqueous solvents (NASs) are generally known to be barely miscible, and reactive with polar compounds, such as water. However, water can interact with some NASs, which can be used as a new means for water recovery from saline water. This study explored the fate of water and salt in NAS, when saline water is mixed with NAS. Three amine solvents were selected as NAS. They had the same molecular formula, but were differentiated by their molecular structures, as follows: 1) NAS 'A' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain, 2) NAS 'B' with symmetrical structure and having the hydrophilic group (NH) at the middle of the straight carbon chain, 3) NAS 'C' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain but possessing a hydrophobic ethyl branch in the middle of the structure. In batch experiments, 0.5 M NaCl water was blended with NASs, and then water and salt content in the NAS were individually measured. Water absorption efficiencies by NAS 'B' and 'C' were 3.8 and 10.7%, respectively. However, salt rejection efficiency was 98.9% and 58.2%, respectively. NAS 'A' exhibited a higher water absorption efficiency of 35.6%, despite a worse salt rejection efficiency of 24.7%. Molecular dynamic (MD) simulation showed the different interactions of water and salts with each NAS. NAS 'A' formed lattice structured clusters, with the hydrophilic group located outside, and captured a large numbers of water molecules, together with salt ions, inside the cluster pockets. NAS 'B' formed a planar-shaped cluster, where only some water molecules, but no salt ions, migrated to the NAS cluster. NAS 'C', with an ethyl group branch, formed a cluster shaped similarly to that of 'B'; however, the boundary surface of the cluster looked higher than that of 'C', due to the branch structure in solvent. The MD simulation was helpful for understanding the experimental results for water absorption and salt rejection, by demonstrating the various interactions between water molecules and the salts, with the different NAS types.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.111-116
• /
• 2016

To determine the optimum condition for the extraction of active components, noni adventitious roots were extracted under various conditions employing various solvents including methanolic water at different ratio (20, 40, 60, 80, and 100% water), extraction times and extraction methods. Anthraquinones, phenolic compounds, and flavonoids extraction using different solvents showed that 1 h of ultrasonic extraction was effective in 60-80% methanol, and 2 h of reflux extraction was effective in 80% methanol. To compare the extraction efficiency of active components according to different extraction methods and extraction times for noni adventitious roots, the active components were extracted by ultrasonic extraction, shaking extraction, reflux extraction, homogenizer extraction, high-pressure extraction, and soaking extraction. The highest phenolic contents were found in the extracted from ultrasonic extraction and anthraquinones and flavonoids contents were highest in the reflux extraction.

• Korean Journal of Plant Resources
• /
• v.32 no.6
• /
• pp.723-729
• /
• 2019

Fagopyrum esculentum (Buckwheat) is a globally used alternative crop that contains several useful substances with various effects; however, many of these substances (rutin, quercetin, etc.) are water insoluble. To extract these substances, alcohols is required, which is inconvenient because these solvents cause diverse problems. Many studies are underway to achieve effective extraction of these substances with water. Among of these studies, microwave assisted water extraction (MAE) has been performed extensively. In this study, we performed the extraction in various solvents and/or microwave from Fagopyrum esculentum. The analysis of the content of useful substances and the bioactivity were performed and shown to increase in MAE. Liquid chromatography-mass was performed in order to identify of the useful water-insoluble substances. Catechin, quercetin, and rutin, which are all insoluble in water, were hardly extracted with water even on heating (4.4 ppb, 3.9 ppb and 60.3 ppb, respectively). However, MAE was found to extract much more of these substances than water (1204 ppb, 110.8 ppb and 2946 ppb, respectively). Although less efficient than alcohols, MAE showed much higher efficiency than simple water extraction. These results indicate that water extraction using microwave technology is effective in cases where it is difficult to extract useful substances using water.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.324-332
• /
• 2016

The objective of this study was to investigate the antioxidant activity of Korean yam (Dioscorea batatas $D_{ECNE.}$) by different extraction solvents including 70% methanol, 70% ethanol and chloroform-methanol mixture (CM, 2:1, v/v). Raw yam was analyzed for its color property, total phenol content and antioxidant activity. Yam possessed high $L^*$ value and $H^{\circ}$ value, which were $81.64{\pm}2.59$ and $83.36{\pm}0.15$, respectively. Raw yam was found to have great antioxidant activity evaluated through ABTS [2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt] radical scavenging activity, DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity, reducing power, and ferric reducing antioxidant power. Total phenol contents of various extracts from raw yam increased in the following order: 70% methanol extract ($37.62{\pm}0.88mg\;CAE/g$), 70% ethanol extract ($43.38{\pm}0.66mg\;CAE/g$) and CM extract ($67.17{\pm}0.12mg\;CAE/g$), respectively. The same trend was also could be found in the ABTS radical scavenging activity, DPPH radical scavenging activity and ferric reducing antioxidant power assays. These results implied that Korean yam might play an important role in antioxidation and serve as the bio-health functional food to take a good part in prevention of human diseases and aging.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.86.1-86.1
• /
• 2015

As the feature size of Si-based semiconductor shrinks to nanometer scale, we are facing to the problems such as short channel effect and leakage current. One of the solutions to cope with those issues is to bring III-V compound semiconductors to the semiconductor structures, because III-V compound semiconductors have much higher carrier mobility than Si. However, introduction of III-V semiconductors to the current Si-based manufacturing process requires great challenge in the development of process integration, since they exhibit totally different physical and chemical properties from Si. For example, epitaxial growth, surface preparation and wet etching of III-V semiconductors have to be optimized for production. In addition, oxidation mechanisms of III-V semiconductors should be elucidated and re-growth of native oxide should be controlled. In this study, surface preparation methods of various III-V compound semiconductors such as GaAs, InAs, and GaSb are introduced in terms of i) how their surfaces are modified after different chemical treatments, ii) how they will be re-oxidized after chemical treatments, and iii) is there any effect of surface orientation on the surface preparation and re-growth of oxide. Surface termination and behaviors on those semiconductors were observed by MIR-FTIR, XPS, ellipsometer, and contact angle measurements. In addition, photoresist stripping process on III-V semiconductor is also studied, because there is a chance that a conventional photoresist stripping process can attack III-V semiconductor surfaces. Based on the Hansen theory various organic solvents such as 1-methyl-2-pyrrolydone, dimethyl sulfoxide, benzyl alcohol, and propylene carbonate, were selected to remove photoresists with and without ion implantation. Although SPM and DIO3 caused etching and/or surface roughening of III-V semiconductor surface, organic solvents could remove I-line photoresist without attack of III-V semiconductor surface. The behavior of photoresist removal depends on the solvent temperature and ion implantation dose.

• Korean Journal of Pharmacognosy
• /
• v.51 no.3
• /
• pp.163-170
• /
• 2020

Mahaenggamsuk-tang (MHGS) has been widely used in Korea and China for the treatment of various diseases. MHGS was constituted the Ephedrea Herba, Armenicae Semen, Glycyrrhizae Radix and Gypsum Fibrosum. In this study, we have made three different solvents extract as MHGS water extract (MHGS-W), MHGS 50% EtOH extract (MHGS-50E), and MHGS 100% EtOH extract (MHGS-100E). The MHGS-W, MHGS-50E and MHGS-100E showed the discernible difference patterns on HPLC analysis. Furthermore, MHGS-50E and MHGS-100E significantly increased the DPPH and ABTS radical scavenging effects than MHGS-W. In addition, the MHGS-50E and MHGS-100E also inhibited significantly nitric oxide (NO) and prostaglandin E2 (PGE₂) production, and inducible nitric oxide synthase (iNOS) cyclooxygenase-2 (COX-2) protein expression in RAW264.7. On the other hand, MHGS-50E and MHGS-W showed remarkable protection on the HT22 cell via heme oxygenase (HO)-1, but MHGS-100E did not show. The results of this study proved that MHGS-50E has greater potential therapeutic uses by exerting antioxidant, anti-inflammatory and neuroprotective effects compared to MHGS-100E, MHGS-W. Our study suggests that the different solvent might be affected the biological activities when make the traditional herbal medicines including MHGS.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.610-614
• /
• 2011

In this study, the effect of solvent on the pre-irradiation grafting of VBC(vinylbenzyl chloride) onto a ETFE(polyethylene-co-tetrafluoroethylene) was evaluated. ETFE film was irradiated to generate radical species onto its backbone chain. Each irradiated film was immersed into VBC monomer mixtures diluted with various solvents such as toluene, heptane, and isopropanol etc. for grafting process and then the degree of grafting of each film was measured. FTIR analysis confirmed that the VBC-g-ETFE film was successful prepared. For the films prepared in the various solvents, the mechanical strength and the distribution pattern of the graft polymer over the cross-section of the films were measured and the effect of solvent was evaluated.

• Advances in nano research
• /
• v.13 no.2
• /
• pp.187-197
• /
• 2022

The synthesis of organic and hybrid organic-inorganic perovskites directly from solution improves the cost- and energy-efficiency of processing. To date, numerous research efforts have been devoted to investigating the influence of the various solvent parameters for the synthesis of lead halide perovskites, focused on the effects of different single solvents on the efficiency of the resulting perovskites. In this work, we investigated the effect of solvent blends for the first time on the structure and phase of perovskites produced via the Lewis base vapor diffusion method to develop a new synthetic approach for water-stable CsPbBr₃ particles with nanometer-sized dimensions. Solvent blends prepared with DMF and water-miscible solvents with different Gutmann's donor numbers (D_N) affect the Pb ions differently, resulting in a variety of lead bromide species with various colors. The use of a DMF/isopropanol solvent mixture was found to induce the formation of the Ruddlesden-Popper perovskite based on lead bromide. This perovskite undergoes a blue color shift in the solvated state owing to the separation of nanoplatelets. In contrast, the replacement of isopropanol with DMSO, which has a high DN, induces the formation of spherical CsPbBr₃ perovskite nanoparticles that exhibit green emission. Finally, the integration of acetone in the solvent system leads to the formation of lead bromide complexes with a yellow-orange color and the perovskite CsPbBr₃.

• Herbal Formula Science
• /
• v.30 no.4
• /
• pp.249-257
• /
• 2022

Objectives : Aquilaria crassna is a traditional herbal medicine, which is used to treat allergies, diabetes, neurological diseases. Recently, Aquilaria crassna extracts have been reported in anti-bacterial and anti-inflammatory activities. In this study, various solvents fraction of Aquilaria crassna were investigated on various physiological activities. Methods : According to the polarity, the solvents fraction of Aquilaria crassna were confirmed through TLC, and the activities of the extracts were confirmed in anti-diabetes, anti-obesity, whitening, anti-gout, and anti-inflammation. Results : TLC results showed that ACM and ACM/E have similar patterns and most of the components were transferred to ACM/E. Treatment with ACM and ACM/E fraction were significantly decreased the generation of NO in lipopolysaccharide (LPS)-stimulated macrophage cells. Analysis of biological activities such as α-glucosidase, protein tyrosine phosphatase (PTP1B), tyrosinase, xanthine oxidase (XO) and pancreatic lipase inhibition, showed that ACM and ACM/E have more inhibitory effects than other fractions. Conclusions : Therefore, the results of the present study clearly demonstrate that Aquilaria crassna and its constituents might be beneficial in the prevention or treatment of immune-regulating effects.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.792-797
• /
• 2015

Graphene has a wide spectrum on its application field due to various and excellent physical properties. However, it is very difficult to apply that graphene exists as lump or fold condition in general organic solvents. Besides, graphene was difficult to maintain as uniform condition due to chemical inert and distributions with various size and shapes. Therefore, this study was focused to study dispersion and modifying methods of aggregated graphene. The dispersion methods contain as follow: i) physical milling using glass bead, ii) co-treatment of glass bead and ultrasonic waves, iii) dispersion in organic solvents, iv) modifying with dry-ice. Milling using glass bead with size 2.5 mm was effective to be size decrease of 36.4% in comparison with control group. Mixed treatment of glass bead (size 2.5 mm) and ultrasonic waves (225W, 10 min) showed relative size decrease of 76%, suggesting that the size decrease depends on the size of glass bead, intensity of ultrasonic waves and treatment time. Solvents of Ethyl acetate (EA) and Isoprophyl alcohol (IPA) were used in order to improve dispersion by modifying surface of graphene. IPA of them showed a favorable dispersion with more -CO functional groups in the FT-IR analysis. On the other hand, the oxygen content of graphene surface modified by dry-ice was highly increased from 0.8 to 4.9%. From the results, it was decided that the favorable dispersion state for a long time was obtained under the condition of -CO functional group increase in IPA solvent.