• 천문학회보
• /
• 제35권1호
• /
• pp.25-25
• /
• 2010

The spectroscopy over a region from 3 to 17 ${\mu}m$ based on the tuneable diode lasers (TDLAS) is the most powerful technique for in situ studies of the diagnostics of small molecules. The increasing interest in small molecules especially containing carbon, oxygen, hydrogen, and fluorine containing ones can be fulfilled by TDLAS at 0.0001 cm-1 resolution, because most of these compounds are infrared active. TDLAS provides a means of determining the absolute concentrations of the ground states of stable and transient molecular species, which can be employed for the time dependent studies in sub micro second scale. Information about gas temperature and population densities can also be derived from TDLAS measurements. Collisional energy transfer between the small molecules can be studied with TDLAS. Also, a variety of free radicals and molecular ions have been detected by TDLAS. Since plasmas with molecular feed gases are used in many applications, there are new applications in industrial field. Recently, the development of quantum cascade lasers (QCLs) offers an attractive new option for TDLAS.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.17.2-17.2
• /
• 2010

Printed electronics is an emerging technology to realize various microelectronic devices via a cost-effective method. Here we demonstrated a high performance of p-channel and n-channel top-gate/bottom contact polymer field-effect transistors (FETs), and applications to elementary organic complementary inverter and ring oscillator circuits by inkjet processing. We could obtained high field-effect mobility more than $0.4\;cm^2/Vs$ for both of p-channel and n-channel FETs, and successfully measured inkjet-printed polymer inverters. The performance of devices highly depends on the selection of dielectrics, printing condition and device architecture. Optimized CMOS ring oscillators with p-type and n-type polymer transistors showed as high as 50 kHz operation frequency. This research was financially supported by development of next generation RFID technology for item level applications (2008-F052-01) funded by the ministry of knowledge economy (MKE).

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.129-136
• /
• 2022

We propose a photonic crystal fiber (PCF) with a slotted porous core and elliptical-hole cladding, for high birefringence in the terahertz regime. Asymmetry in the guided mode is obtained mainly by using arrays of elliptical air holes in the TOPAS^® polymer cladding. We investigate the tradeoff between several structural parameters and find optimized values that can have a high birefringence while satisfying the single-mode condition. The optical properties in the terahertz regime are thoroughly analyzed in numerical simulations, using a full-vector finite-element method with the perfectly-matched-layer condition. In an optimal design, the proposed photonic crystal fiber shows a high birefringence of 8.80 × 10^-2 and an effective material loss of 0.07 cm^-1 at a frequency of 1 THz, satisfying the single-mode-guidance condition at the same time. The proposed PCF would be useful for various polarization-management applications in the terahertz range.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.737-739
• /
• 1998

Gate insulators using various fluoride films were investigated for thin film transistor applications. Conventional oxide containing materials exhibited high interface states, high $D_{it}$ gives an increased threshold voltage and poor stability of TFT. To improve TFT performances, we must reduce interface trap charge density between Si and gate insulator. In this paper, we investigated gate insulators such as such as $CaF_2$, $SrF_2$, $MgF_2$ and $BaF_2$. These materials exhibited an improvement in lattice mismatch, difference in thermal expansion coefficient, and electrical stability MIM and MIS devices were employed for an electrical characterization and structural property examination. Among the various fluoride materials, $CaF_2$ film showed an excellent lattice mismatch of 0.737%, breakdown electric field higher than 1.7MV/cm and leakage current density of $10^{-6}A/cm^2$. This paper probes a possibility of new gate insulator material for TFT application.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.186-194
• /
• 2016

Consumption of fruits and vegetables has been conducted to be effective in the prevention of chronic diseases. In this study, 70% methanol, 70% ethanol and chloroform-methanol mixture (CM, 2:1, v/v) were used as solvents in the extraction of apple peels. The total phenol content, total flavonoid content and antioxidant activity of various extracts were investigated using in vitro assays. The extract obtained by 70% methanol showed the highest total phenol content ($20.87{\pm}0.17mgCAE/g$), ABTS [2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt] radical scavenging activity and ferric reducing antioxidant power. However, 70% ethanol extract possessed the strongest antioxidant activity assayed by DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity and ${\beta}$-carotene bleaching method. And CM extract was found to show the highest total flavonoid content with the value of $9.26{\pm}0.06mgQE/g$. These results indicated that apple peels can be used in dietary applications with a potential to reduce oxidative stress.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.265-271
• /
• 2003

Ferroelectric lanthanum-substituted Bi$_4$Ti$_3$O$_{12}$(BLT) thin films were fabricated by spin-coating onto a Pt/Ti/SiO$_2$/Si substrate by metalorganic decomposition technique. The grain size in BLT thin films were prepared with controlled by various drying process. The effect of grain size on the crystallization and ferroelectric properties were investigated by x-ray diffraction and field emission scanning electron microscope. The dependence of crystallization and electrical properties are related to the grain size in BLT thin films with different drying temperature. The remanent polarization of BLT thin film increases with the increasing grain size. The value of 2P$_{r}$ and E$_{c}$ of BLT thin film dried at 45$0^{\circ}C$ were 25.9 $\mu$C/$\textrm{cm}^2$ and 85 kV/cm, respectively. The BLT thin film with larger grain size has better fatigue properties. The fatigue properties revealed that small grained film showed more degradation of switching charge than large grained films.lms.s.

• Archives of Reconstructive Microsurgery
• /
• 제18권1호
• /
• pp.1-8
• /
• 2009

Purpose: The perforator flaps have established their role in the reconstruction of various soft tissue defects. For the last five years, we have extensively used anterolateral thigh (ALT) flap for the reconstruction of the complex tissue defects of the hand and upper extremity and report the clinical results and our experiences with the versatile applications of this flap. Materials and Methods: From March 2003 through May 2008, 119 free ALT perforator flaps were transferred for reconstruction of the complex tissue defects of the elbow, forearm, wrist and hand after crushing or degloving injuries as well as severe scar contractures. There were 95 females and 24 males. The mean age of the patients was 37 years and mean size of the flap was 170 $cm^2$. In 20 cases, the flap was vascularized by septocutaneous and in 99 cases by musculocutaneous perforators. Intra-muscular dissection length averaged 3.4 cm. The total length of pedicle averaged 8.4 cm and the average arterial diameter was 0.84 mm. End-to-end arterial anastomosis was performed in 103 cases and end-to-side in 16 cases. Results: Flap survival rate was 98.3%(117/119) and there were 6 cases of partial necrosis. Donor site was closed primarily in 41 cases and skin grafts were applied in 78 cases. Conclusion: The reliability and versatility of ALT flap makes it one of the foremost choices for the reconstruction of complex tissue defects of the upper extremity.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.229-238
• /
• 2009

Currently, subway is becoming a major part of transportation and living environment in large cities such as Seoul or Hong Kong. As the numbers of subway lines and stations increase, visual cues indicating places are needed for users with various destinations, and environmental colors as well as line colors can be expected as effective informations for easy wayfinding. The purpose of this study is to understand the current color applications in terms of creating regional differentiation and informing subway lines in the transfer stations of Seoul and Hong Kong, by field investigation. The investigation has been proceed on 24 transfer stations from February to April, 2009 by taking photos and measuring environmental colors using Minolta spectrophotometer CM-2600d. As a result, regional differentiation in color application appeared generally low in both Seoul and Hong Kong but various 'hues' differing each station are used in Hong Kong, compared to limited use of 'hues' in Seoul, In terms of 'value', the rate of Seoul appeared lightly higher than that of Hong Kong, and the use of medium high rate of 'saturation' of main and secondary colors are shown as a remarkable character of Hong Kong.

• Composites Research
• /
• 제34권6호
• /
• pp.373-379
• /
• 2021

A series of novel PBI/SrTiO₃ nanocomposite membranes composed of polybenzimidazole (PBI) and strontium titanate (SrTiO₃) with a perovskite structure were fabricated with various concentrations of SrTiO₃ through a solution casting method. Various characterization techniques such as proton nuclear magnetic resonance, thermogravimetric analysis, atomic force microscopy (AFM) and AC impedance spectroscopy were used to investigate the chemical structure, thermal, phosphate absorption and morphological properties, and proton conductivity of the fabricated nanocomposite membranes. The optimized PBI/SrTiO₃-8 polymer nanocomposite membrane containing 8wt% of SrTiO₃ showed a higher proton conductivity of 7.95 × 10^-2 S/cm at 160℃ compared to other nanocomposite membranes. The PBI/SrTiO₃-8 composite membrane also showed higher thermal stability compared to pristine PBI. In addition, the roughness change of the polymer composite membrane was also investigated by AFM. Based on these results, nanocomposite membranes based on perovskite structures are expected to be considered as potential candidates for high-temperature PEM fuel cell applications.