• 한국광학회지
• /
• 제14권4호
• /
• pp.359-364
• /
• 2003

편광에 따른 성능 변화가 작은 deep-ridge 도파관 구조에 제작이 용이한 double-sided 프로세스를 이용하여 구현할 수 있는 편광에 무관한 매우 짧은 결합 길이를 가지는 double-sided deep-ridge 도파관 구조를 가지는 새로운 수직 방향성 결합기를 제안하고 여러 가지 구조 파라미터들이 결합길이에 미치는 영향에 대하여 연구하였다. 도파관 폭의 변화에 대한 결합길이의 변화는 코어 두께의 변화에 대한 결합길이의 변화보다 작게 나타나는 것을 볼 수 있었다. 내부 클래딩 영역의 두께가 감소할수록, 코어 두께가 감소할수록 결합 길이가 감소함을 볼 수 있었다. 또한 같은 코어 두께에 대해서는 내부 클래딩 영역의 두께가 감소할수록, 같은 내부 클래딩 영역의 두께에 대해서는 코어 두께가 감소할수록 편광에 관계없이 결합 길이가 같아지는 도파관 폭이 작아짐을 볼 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.423-432
• /
• 2016

PURPOSE. The aim of this work is to evaluate different types of materials used for making implant abutments, by means of an in vitro study and a review of the literature, in order to identify the indications for a better choice of an implant-supported restoration in the anterior section. MATERIALS AND METHODS. 5 implant abutments were tested in a random order in the superior anterior maxilla of pig gingiva (n = 8): titanium dioxide (Nobel Biocare); zirconium dioxide, Standard BO shade (Nobel Biocare, Kloten, Switzerland); zirconium dioxide, Light BI shade (Nobel Biocare); zirconium dioxide, Intense A 3.5 shade (Nobel Biocare); and aluminium oxide. Each abutment was tested for 2 mm and 3 mm thickness. To determine color variation, VITA Easyshade Advance spectrophotometer (Vita Zahnfabrik, Bad Sackingen, Germany) was used. RESULTS. Results showed that the color variation induced by the abutment would be affected by the abutment material and gingival thickness, when the gingival thickness is 2 mm. All materials except zirconium dioxide (Standard shade) caused a visible change of color. Then, as the thickness of the gingiva increased to 3 mm, the color variation was attenuated in a significant manner and became invisible for all types of abutments, except those made of aluminium oxide. CONCLUSION. Zirconium dioxide is the material causing the lowest color variation at 2 mm and at 3 mm, whereas aluminium oxide causes the highest color variation no matter the thickness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.168-171
• /
• 2003

Generally RF AGC (Roll Force Automatic Gauge Control) controls the roll gap using the variation of rolling force caused by the roll eccentricity and the entry thickness of material, but RE AGC takes the bad effect of the roll eccentricity. The Feed-forward (FF) AGC method, which controls the next stand roll gap by the estimation of the thickness variation due to skid mark is needed to supplement the shortage of RF AGC. In this paper, an adaptive filtering method which takes account of the kind of material, the final objective thickness and the rolling speed is proposed to predict skid mark thickness variation. In addition, an improved estimation method of control point using a speedometer and looper angle is suggested. Via on line test, the performance improvement of the suggested FF AGC method is verified.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.58-65
• /
• 2007

The arbitrarily-bended pipe is widely used in a heat exchanger system. Thus, the pipe bending process has important role in performance and productivity of heat exchanger system. The purpose of this study is to investigate the bending process for manufacturing of sound pipe. And, the spring-back effect and the variation of pipe thickness should be controlled effectively. The change of spring-back ratio and the thickness variation of pipe according to the change of bending radius, bending angle and pipe thickness are analyzed by FEM analysis. The analytic results are compared with the experimental data, accordingly the results show good agreement. The method of the analysis can be applied for manufacturing of precision bended pipe.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1568-1570
• /
• 2003

We have studied the I-V characteristics of polytetrafluoroethylene(PTFE) thin film depending on a variation of thickness. Polymer PTFE buffer layer was made using thermal evaporation technique. The device was made in the structure of ITO/PTFE/Al. We have observed the NDR(negative differential resistance) behavior between 2.5V and 5V. There are some reports on this NDR behavior in the polymer thin film[1]. We have studied the NDR behavior depending on a variation thickness. As the film thickness increased, The NDR behavior decreased and moved in low electrical field, and we have studied the conduction mechanism of PTFE thin film.

• 지질학회지
• /
• 제54권6호
• /
• pp.631-640
• /
• 2018

퇴적층의 두께와 형성 기간을 분석하는 것은 퇴적분지의 발달사를 이해하기 위한 분지 해석과 모델링 연구에서 중요하다. 분지 발달 과정에서 퇴적층은 깊이가 증가함에 따라 다짐 작용에 의해 두께가 감소하고, 이 두께 변화는 깊이에 따른 공극률 변화 경향(다짐 작용 경향)을 통해 계산이 가능하다. 이 연구에서는 대표적인 퇴적암상인 사암, 셰일, 탄산염암의 깊이에 따른 공극률 변화 자료를 기반으로, 암상에 따른 다짐 작용 경향의 범위를 지수 함수를 이용하여 정량화하였다. 그리고 다짐 작용이 퇴적층의 공극률과 두께 변화에 미치는 영향을 수치해석적 방법을 이용해 평가하였다. 사암은 초기 공극률의 범위가 좁고 깊이 증가에 따른 공극률 감소 경향이 비교적 일정하여, 다짐 작용에 의한 층두께의 변화 범위가 작다. 셰일은 약 2,000 m 깊이까지 공극률이 빠르게 감소한 후, 급격히 낮아진 감소율을 보이며 이는 퇴적층의 두께 변화에도 반영된다. 탄산염암은 초기 공극률의 범위가 넓고, 깊이 증가에 따른 공극률 감소 양상의 차이가 커서, 결과적으로 다짐 작용에 의해 감소한 퇴적층 두께 차이의 범위도 크게 나타난다. 이 수치 해석적 다짐 작용 연구의 정량적 분석 결과에서 나타난 각 암상들의 다짐 작용에 따른 공극률과 층두께 감소의 특징들은 퇴적분지의 생성과 발달 과정을 이해하기 위해 필요한 퇴적층 두께 복원과 침강사 그리고 지열 작용 분석에 영향을 끼치며, 이는 다짐 작용 경향이 분지 모델링 연구에서 중요한 요소이며 적절한 적용이 필요함을 보여준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권5호
• /
• pp.495-498
• /
• 1995

Records taken on 372 young beef bulls tested at the Ellerslie Bull Test Station, Alberta, Canada from November 1981 to April 1987 were analyzed to quantify the effects of age of dam, on-test age, on-test liveweight and herd of origin of bull on feed efficiency (feed/gain, kg/kg) in the test period (n = 231) and ultrasonic measurement of bakcfat thickness (mm) at the end of the test (n = 372). The reduction in $R^2$ due to each influencing factor (i.e. the variation accounted for by the factor) was used to indicate the importance of the influencing factor. Age of dam and on-test age of bull were not important factors on feed/gain and ultrasonic backfat thickness, as they accounted for less than 0.5% of the variation in feed/gain and ultrasonic backfat thickness, respectively (p > 0.1). On-test liveweight had some influence on feed/gain and ultrasonic backfat thickness, accounting for 3.5% (p < 0.01) and 0.4% (p < 0.05) of the total variation, respectively. The regression coefficients of feed/gain and ultrasonic backfat thickness on on-test liveweight were 0.016 (kg/kg)/kg and .013 mm/kg, respectively, both being significant (p < 0.05), indicating that lighter bulls entering the test were generally more efficient in feed utilization in the test period and had less backfat at the end of the test than heavier entering bulls. Herd of origin of bull accounted for a substantial amount of the total variation (> 16%) in feed/gain and ultrasonic backfat thickness (p = 0.08), indicating that a prolonged aqjustment period was needed to reduce the influence of herd of origin when assessing aggregate genetic merit of beef bulls for growth rate, feed efficiency and lean meat production using a central station performance testing program.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.803-804
• /
• 2012

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.25-28
• /
• 2001

The problem considered is the buckling of a rectangular orthotropic plate, tapered in thickness in a direction parallel to two sides and compressed in that direction. Curves are presented showing the variation of buckling stress coefficient with the special loads. The type of thickness variation is exponential. While this paper is presented how to design for an efficient orthotropic plate taper from physical consideration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1379-1381
• /
• 1998

Powder electroluminescent device (PELD) structured conventionally dielectric and phosphor layer, between electrode and their layer fabricated by screen printing splaying or spin coating method. To promote performance of PELDs, we approached the experiments for different structure and thickness variation of PELD. Thickness variation($30{\mu}m{\sim}130{\mu}m$) was taken. To investigate electrical and optical properties of PELDs, EL spectrum, transferred charge density using Sawyer-Tower's circuit brightness was measured. Variation of structure in PELDs was as follows: WK-1 (ITO/BaTiO3/ZnS:Cu/Silver paste), WK-2 (ITO/BaTiO3/ZnS:Cu/BaTiO3/ZnS:Silver paste), WK-3 (ITO/BaTiO3/ZnS:Cu/BaTiO3/Silver paste), WK-4(ITO/BaTiO3+ZnS:Cu/Silver paste) As a result, structure of the highest brightness appeared WK-4 possessed 60 ${\mu}m$ thickness. The brightness was 2719 cd/$m^2$ at 100V, 400Hz.