• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.3
• /
• pp.59-66
• /
• 2023

This study attempts to examine the process of establishing a Japanese-style garden in the modern period through the perspectives of garden designers, spatial composition, spatial components, and materials used in their works, and to use it as data for embodying the identity of Korean garden. The results are as follows: First, by incorporating elements associated with Koreanness into the modern garden culture, there are differences in location, presence, and subjectivity when compared to Japan. This reflects Japan's relatively seamless cultural continuity compared to Korea's cultural disconnection during the modern period. Second, prior to the modern period, Japan's garden culture spread and continued to develop throughout the country without significant interruptions. However, during the modern period, the Meiji government promoted the policy of 'civilization and enlightenment (Bunmei-kaika, 文明開化)' and introduced advanced European and American civilizations, leading to the popularity of Western-style architectural techniques. Unfortunately, the rapid introduction of Western culture caused the traditional Japanese culture to be overshadowed. In 1879, British architect Josiah Condor guided Japanese architects and introduced atelier and traditional designs of Japanese gardens into the design. The garden style of Ogawa Jihei VII, a garden designer in Kyoto during the Meiji and Taisho periods, was accepted by influential political and business leaders who sought to preserve Japan's traditional culture. And a protection system of garden was established through the preparation of various laws and regulations. Third, as a comprehensive analysis of Japanese modern gardens, the examination of garden designers, Japanese components, materials, elements, and the Japanese-style showed that Yamagata Aritomo, Ogawa Jihei VII, and Mirei Shigemori were representative garden designers who preserved the Japanese-style in their gardens. They introduced features such as the creation of a Daejicheon(大池泉) garden, which involves a large pond on a spacious land, as well as the naturalistic borrowed scenery method and water flow. Key components of Japanese-style gardens include the use of turf, winding garden paths, and the variation of plant species. Fourth, an analysis of the Japanese-style elements in the target sites revealed that the use of flowing water had the highest occurrence at 47.06% among the individual elements of spatial composition. Daejicheon and naturalistic borrowed scenery were also shown. The use of turf and winding paths were at 65.88% and 78.82%, respectively. The alteration of tree species was relatively less common at 28.24% compared to the application of turf or winding paths. Fifth, it is essential to discover more gardens from the modern period and meticulously document the creators or owners of the gardens, the spatial composition, spatial components, and materials used. This information will be invaluable in uncovering the identity of our own gardens. This study was conducted based on the analysis of the process of establishing the Japanese-style during Japan's modern period, utilizing examples of garden designers and gardens. While this study has limitations, such as the absence of in-depth research and more case studies or specific techniques, it sets the stage for future exploration.

• Korean Journal of Environmental Biology
• /
• v.26 no.4
• /
• pp.279-291
• /
• 2008

The seasonal distribution pattern of the Bivalvia samples collected from 12 stations in Gamak Bay in April, July, September and November from 2001 to 2006. A total of 28 species (226.72$\pm$196.20 ind. m$^{-2}$) were identified. The COD has decreased from 3.30 mg L$^{-1}$ to 1.89 mg L$^{-1}$ level on average and especially, the COD of sediment has decreased from 21.51 mg g-dry$^{-1}$ to 16.99 mg g-dry$^{-1}$ level on average. Therefore, water quality level of Gamak Bay was improved from level 3 to 2. The dominant species over 1.0 percentages were composed of the total 13 species, and they occupied 96.75% of the total density of the Bivalvia. Major dominant species was Musculista senhousia 100.38 ind. m$^{-2}$ (22.16%), Moerella rutila 69.00 ind. m$^{-2}$ (15.23%), Theorafragilis 49.70 ind. m$^{-2}$ (10.97%), Mytilus edulis 42.18 ind. m$^{-2}$ (9.31 %), and Raphia undulata 40.99 ind. m$^{-2}$ (9.05%). This area could be divided into three groups by the cluster analysis based on the total species composition.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.1-10
• /
• 1996

The contents of heavy metals in soil near the Janghang smelter area were observed to understand present status and relationship between their fraction and the absorption by rice. The soil samples were taken from the eight sites of the paddy fields in 1982 and 1990, and analysis on heavy metals including Cd, Zn, Cu and Pb was performed. The results were as follows: Total contents of heavy metals in the samples of 1990 were higher than those of 1982. The order of increasing ratio was Cu > Zn > Pb > Cd and the variation of Cd content by sequential differente extracting was residual > exchangeable > dilute acid-extractable fractions and its increasing range was from 38 to 71% during nine years. The ratio of immobile heavy metals bound within an oxide or silicate matrix of Fe-Mn oxide bound and residual in surface soil was that Cd, Pb, Cu and Zn were 31.65, 42.22, 76.57 and 79.49%, respectively, and their mobile ratios of exchangeable, dilute acid-extractable and organically bound were more than 20.28%. Those of mobile Cd, Pb, Cu and Zn were 68.35, 55.78, 23.43 and 20.28%, respectively. Correlation between the heavy metal contents in surface soil and those in tissue of rice plant, such as leaf blade, leaf sheath, stem and panicle axis, were significant, but were not significant in subsurface soil. The dilute acid-extractable and organically bound fractions of Cd, Cu, Pb and Zn in surface soil were more significantly correlated with those in tissues of paddy rice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.99-106
• /
• 2013

Purpose: The aim of this research was to establish the effect and variation in differing convergence angle and length of abutment on the retention of full veneer casted gold crown. Materials and methods: Two different length,5 mm and 10 mm in height with convergence angles of 5, 10, 15 and 25 degrees crowns were fabricated. Cementation was done using cements; zinc phosphate cement (Fleck's zinc phosphate cement), resin-modified glass ionomer cement (Vitremer) and resin cement (Panavia 21). These were tested for tensile force at the point of separation by using Instron Universal Testing Machine. Statistical analysis was done by SAS 6.04 package. Results: In all cements the mean retention decreased with significant difference on increase of convergence angle (P<.05). Increase in every 5 degree-convergence angel the retention rate decreased with resin-modified glass ionomer cement of 15.9% and resin cement of 14.8%. With zinc phosphate cement, there was largest decreasing rate of mean retention of 25.5% between convergence angles from 5 degree to 10 degree. When the crown length increased from 5 mm to 10 mm, the retention increased with the significant difference in the same convergence angle and in all types of cement used (P<.05). Conclusion: The retention was strongly dependent on geometric factors of abutment. Much care is required in choosing cements for an optimal retention in abutments with different convergence angles and crown lengths.

• Journal of Korean Society of Forest Science
• /
• v.46 no.1
• /
• pp.29-43
• /
• 1980

The sampling methods selected for this area was (1) Simple random sampling (2) Systematic sampling and (3) Sub-sampling. For the calculation of the number of sampling plot, 10 % coefficient of variation was adapted. As a result, 57 plots each for simple random sampling and systematic sampling was calculated. In the sub-sampling method, however, total of 40 plots, which were consisted of 5 Blocks, secondary 4 major units and tertiary 2 minor units, were examined. The reuslts obtained are summarized as follows : 1. The rate of expected error was 9.24% for simple random sampling, 8.36% for systematic sampling and 7.54% for sub-sampling, respectively. Therefore, the sub-sampling was proved to be the most accurate method among the test. 2. The volume calculated by each sampling method was compared to the volume of all stand. The rate of expected error was also lowest in the sub-sampling (0.39%), followed by systematic sampling (4.18%) and simple random sampling (7.92%). 3. Comparing the various reuslts and analysis of these results, the sub-sampling was regarded as the most rapid and economical method because this method had not only the least number of plots but also the least expected error among the tested sampling methods Therefore the sub-sampling is proved to be an ideal sampling method for forest survey.

• Korean Journal of Food Science and Technology
• /
• v.45 no.5
• /
• pp.531-536
• /
• 2013

We developed a simple, sensitive, and specific analytical method for prometryn using gas chromatography-mass spectrometry (GC-MS). Prometryn is a selective herbicide used for the control of annual grasses and broadleaf weeds in cotton and celery crops. On the basis of high specificity, sensitivity, and reproducibility, combined with simple analytical operation, we propose that our newly developed method is suitable for use as a Ministry of Food and Drug Safety (MFDS, Korea) official method in the routine analysis of individual pesticide residues. Further, the method is applicable in clams. The separation condition for GC-MS was optimized by using a DB-5MS capillary column ($30m{\times}0.25mm$, 0.25 ${\mu}m$) with helium as the carrier gas, at a flow rate of 0.9 mL/min. We achieved high linearity over the concentration range 0.02-0.5 mg/L (correlation coefficient, $r^2$ >0.998). Our method is specific and sensitive, and has a quantitation limit of 0.04 mg/kg. The average recovery in clams ranged from 84.0% to 98.0%. The reproducibility of measurements expressed as the coefficient of variation (CV%) ranged from 3.0% to 7.1%. Our analytical procedure showed high accuracy and acceptable sensitivity regarding the analytical requirements for prometryn in fishery products. Finally, we successfully applied our method to the determination of residue levels in fishery products, and showed that none of the analyzed samples contained detectable amounts of residues.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2255-2265
• /
• 2013

This study presents the width function-based Clark model. To this end, rescaled width function with distinction between hillslope and channel velocity is used as time-area curve and then it is routed through linear storage within the framework of not finite difference scheme used in original Clark model but analytical expression of linear storage routing. There are three parameters focused in this study: storage coefficient, hillslope velocity and channel velocity. SCE-UA, one of the popular global optimization methods, is applied to estimate them. The shapes of resulting IUHs from this study are evaluated in terms of the three statistical moments of hydrologic response functions: mean, variance and the third moment about the center of IUH. The correlation coefficients to the three statistical moments simulated in this study against these of observed hydrographs were estimated at 0.995 for the mean, 0.993 for the variance and 0.983 for the third moment about the center of IUH. The shape of resulting IUHs from this study give rise to satisfactory simulation results in terms of the mean and variance. But the third moment about the center of IUH tend to be overestimated. Clark model proposed in this study is superior to the one only taking into account mean and variance of IUH with respect to skewness, peak discharge and peak time of runoff hydrograph. From this result it is confirmed that the method suggested in this study is useful tool to reflect the heterogeneity of drainage path and hydrodynamic parameters. The variation of statistical moments of IUH are mainly influenced by storage coefficient and in turn the effect of channel velocity is greater than the one of hillslope velocity. Therefore storage coefficient and channel velocity are the crucial factors in shaping the form of IUH and should be considered carefully to apply Clark model proposed in this study.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.565-572
• /
• 2001

The spatial genetic structure of Needle fir(Abies holophylla Max.) seedlings on forest gap within a Needle fir forest at Mt. Odae in Korea was analyzed on the basis of ISSR(inter-simple sequence repeats) marker analysis. The gap size was $1,500m^2(50m{\times}30m)$, and we sampled 416 one- or two-year-old seedlings by 2m intervals. Some trees at the upper crown layer except Needle firs and all trees at the middle and lower crown layers were removed, and Needle firs at the upper crown layer showed very weak growth strength or to be withering to death. The results of spatial autocorrelation using 31 polymorphic ISSR markers revealed that it was genetically homogeneous within spatial distance of 15.6m and the randomness of genetic distribution was from 15.6m to 31.2m. The genetic patch size of seedlings in forest gap might be restricted by the density of mother trees, making allow for the average height of adult Needle firs, the seed dispersal area, and the average distance between adults. For the directionality of seedling distribution, we investigated the variography using 'genetic configuration' which was the value of configuration in Multidimensional Scaling by genetic distance. In directional variogram, the increment of spatial distance from East to West direction was inversely proportional to genetic homogeneity. We presumed that this anisotrophy of seedling distribution at this forest gap resulted from the directionality of seed dispersal rather than the difference of fecundity between mother trees or the microhabitat variation, taking the evenness of forest floor condition, a vast seed production and the random distribution of seedlings at the studied site into consideration.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.771-779
• /
• 1997

The purpose of this in vitro study was to evaluate the effects of different acid etching times on the enamel surface morphology, shear bond strength and debonding failure mode of orthodontic attachment. Ninety six extracted human mandibular premolars were divided into eight groups of twelve teeth. The buccal surfaces were etched with $37\%$, phosphoric acid for 5, 10, 15, 30, 45, 60, 90 and 120 seconds, respectively. Two teeth from each group were used for scanning electron microscope examination. On the etched buccal surfaces of remaining teeth, orthodontic attachments(lingual buttons) were bonded with light cured orthodontic adhesive. Twenty foot hours after bonding, a Instron universal testing machine was used to determine shear bond strength of orthodontic attachment to enamel. After debonding, bases of orthodontic attachments and enamel surfaces were examined under stereoscopic microscope to determine failure mode. Statistical analysis of the data was carried out with one nay ANOVA and Duncan's multiple range test The results were as follows; 1. There was no statistically significant difference in shear bond strengths between the various etching times(p<0.05). 2. The failure modes of orthodontic attachments had some differences. In 5, 10 and 15 seconds etching groups, the percentage of adhesive/enamel interface failure was higher than that of adhesive/attachment interface failure. On the contrary, in 30, 45, 60, 90 and 120 seconds etching groups, the results were reversed. 3. The etching patterns of enamel surfaces had a great variation. So, we could not find any correlation between etching pattern and bond strength. 4. The findings in this study indicate that in vitro reduction of the etching me to 5 seconds maintains clinically acceptable bond strength. However, further study is required to determine the cause of failure mode in 5, 10 and 15 seconds groups.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.343-351
• /
• 2017

T1, T2 relaxation time and relaxation rates were measured and analyzed according to the change of RF coil channel number of MAGiC sequence. T1, T2, R1 and R2 maps were obtained by using MAGiC sequence with phantom (1.0, 0.6, 0.2, 0 mM) on the RF coil with channel number of 1, 8, 16 and 32 respectively. T1, T2, R1, R2 values and relaxation rates were measured for each channel number and concentration, and Relaxivity was calculated according to each concentration. T1, T2, R1, and R2 values were measured in each coil. There was no significant difference between T1 and R1 values (p> 0.05). However, T2 and R2 values were significantly different (p <0.05). In the post-analysis results, T2 value was significantly different from that measured on 1, 8, 16, and 32 channel coils (p <0.05) and There was no difference between 8, 16, and 32 channel coils (p> 0.05). The R2 value was significantly different from that measured on the 8, 16, and 32 channel coils in the 1 channel coil, and the results on the 8 channel coils and the 16 channel coils showed a significant difference (P <0.05). In conclusion, T1 and R1 values were not significantly different according to the number of channels in the coil, but T2 and R2 values were significantly different. Therefore, when quantitative measurement of T2 and R2 values using the MAGiC sequence, the same number of coils should be used for reproducibility.