• 한국광학회지
• /
• 제29권6호
• /
• pp.275-284
• /
• 2018

본 연구에서는 나노 홀 배열과 나노 디스크 배열이 AZ 1500 나노 기둥에 의해 분리된 하이브리드 구조의 컬러 필터 설계방법을 제시한다. 우리는 각 설계 변수에 따른 투과광 특성 변화의 경향성을 이용하여 RGB 컬러 필터 설계 방법을 제시한다. 특히, 단면에서의 전기장의 세기 분포를 분석하여 두 배열에서 각각 발생하는 국소 표면 플라즈몬 공명이 서로에게 영향을 주지 않도록 AZ 1500 나노 기둥의 높이를 설정하였다. 최적화된 컬러 필터의 투과광 특성은 다음과 같다. Red 컬러 필터의 투과광 특성은 가시광 대역에서 Red를 표현하는 파장대역이 차지하는 비율이 55.01%, 투과도 최댓값이 41.53%이다. 그리고 Green컬러 필터의 경우, Green을 표현하는 파장대역의 비율이 40.20%, 투과도 최댓값은 42.41%이다. Blue 컬러 필터의 경우, Blue를 표현하는 파장 대역의 비율이 32.78%, 투과도 최댓값은 30.27%이다. 본 연구를 통해 산업용 장치에 집적되는 컬러 필터의 특성 향상을 이끌어 낼 수 있을 것으로 예상한다.

• 한국지구과학회지
• /
• 제37권7호
• /
• pp.389-397
• /
• 2016

${\delta}$ Scuti형 변광성 BO Lyn의 파장에 따른 광도곡선 차이를 알아보기 위해서 보현산천문대의 1.8m 반사망원경과 적외선 검출기 KASINICS를 이용한 측광 관측을 수행하였다. 2011년 3월 26일부터 4월 1일까지 총 7일간의 관측 자료로 J, H, Ks필터 광도곡선을 얻어 기존에 보고된 V필터에서의 광도곡선과 비교하여 주기, 극대점, 진폭, 형태에 대한 차이를 알아보았다. 적외선 광도곡선의 주기 분석 결과 단일 주파수해 $f_1=10.712cycle/day$, 주기$P=0.09335{\pm}0.00002days$의 값을 얻었으며, 파장에 따른 주기의 차이는 나타나지 않았다. 적외선에서는 $2f_1$에 해당하는 주파수가 검출되었는데, 이는 고진폭 ${\delta}$ Scuti형 변광성의 특징인 비대칭적인 광도곡선의 형태를 잘 설명해준다. 극대점의 위치를 비교한 결과 계산된 V필터의 예상 극대점보다 관측된 적외선 극대점이 전체 주기의 약 0.3에 해당하는 만큼 더 늦게 나타났다. 진폭은 ${\Delta}J/{\Delta}V=0.328$, ${\Delta}H/{\Delta}V=0.216$, ${\Delta}Ks/{\Delta}V=0.211$로 파장이 길어질수록 변광의 폭이 더 작게 나타났다. 파장에 따른 극대점의 지연과 변광폭의 차이는 맥동변광성의 밝기 변화가 주로 온도변화에 기인하기 때문인 것으로 여겨진다.

• 농업과학연구
• /
• 제45권4호
• /
• pp.823-837
• /
• 2018

The objective of this study was to evaluate the firmness and the sweetness index (SI) of tomatoes with a hyperspectral imaging (HSI) technique within the wavelength range of 1000 - 1550 nm. The hyperspectral images of 95 tomatoes were acquired with a push-broom hyperspectral reflectance imaging system, from which the mean spectra of each tomato were extracted from the regions of interest. The reference firmness and sweetness index of the same sample was measured and calibrated with their corresponding spectral data by partial least squares (PLS) regression with different preprocessing methods. The calibration model developed by PLS regression based on the Savitzky-Golay second-derivative preprocessed spectra resulted in a better performance for both the firmness and the SI of the tomatoes compared to models developed by other preprocessing methods. The correlation coefficients ($R_{pred}$) were 0.82, and 0.74 with a standard error of prediction of 0.86 N, and 0.63, respectively. Then, the feature wavelengths were identified using a model-based variable selection method, i.e., variable importance in projection, from the PLS regression analyses. Finally, chemical images were derived by applying the respective regression coefficients on the spectral image in a pixel-wise manner. The resulting chemical images provided detailed information on the firmness and the SI of the tomatoes. The results show that the proposed HSI technique has potential for rapid and non-destructive evaluation of firmness and the sweetness index of tomatoes.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2955-2960
• /
• 2012

Product ion yields in the in- and post-source decays of three peptide ions, $[Y_5X+H]^+$ (X = Y (tyrosine), K (lysine), and R (arginine)), generated by matrix-assisted laser desorption ionization (MALDI) were measured at six wavelengths, 307, 317, 327, 337, 347, and 357 nm, using ${\alpha}$-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB) as the matrices. The temperatures of the early and late plumes generated by MALDI were estimated via kinetic analysis of the product ion yield data. For both matrices, the temperature drop (${\Delta}T$), i.e. the difference in the temperature between the early and late plumes, displayed negative correlation with the absorption coefficient. This was in agreement with the previous reasoning that deeper laser penetration and larger amount of material ablation arising from smaller absorption coefficient would result in larger extent of expansion cooling. The results support the postulation of the expansion cooling occurring in the plume presented previously.

• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.257-263
• /
• 2015

Recently two seismic cloaking methods of earthquake engineering have been suggested. One is the seismic wave deflection method that makes the seismic wave bend away and the other is the shadow zone method that makes an area that seismic waves cannot pass through. It is called as seismic cloaking. The fundamental principles of the seismic cloaking by variable refractive index were explained. A two-dimensional cylindrical model which was composed of 40 layers of different density and modulus was tested by numerical simulation. The center region of the model to be protected is called 'cloaked area' and the outer region of it to deflect the incoming wave is called 'cloaking area' or 'cloak area.' As the incoming surface wave is approaching to the cloaking area, the refractive index is decreasing and, therefore, the velocity and impedance are increasing. Then, the wave bends away the cloaked area instead of passing it. Three cases are tested depending on the comparison between the seismic wavelength and the diameter of the cloaked region. The advantage and disadvantage of the method were compared with conventional earthquake engineering method. Some practical requirements for realization in fields were discussed.

• 한국ITS학회 논문지
• /
• 제11권5호
• /
• pp.97-102
• /
• 2012

본 논문에서는 다양한 초고주파 시스템에서 SIR의 다양한 응용을 위해 반파장 공진기로 등가되는 다단 SIR의 입력 임피던스를 통해 각 단의 전기적 길이 및 고차 하모닉 주파수를 계산하였다. 다단 SIR의 크기 감소율은 단수의 증가에 따라 다소 감소하고 임피던스 비에 의해 지배적으로 영향을 받으며, 하모닉 특성은 단수에 따른 변화가 미미하며 임피던스 비가 작아질수록 기본 공진주파수에서 멀어지게 된다. 또한, 다단 SIR의 등가 임피던스는 가장 낮은 특성 임피던스와 가장 높은 특성 임피던스의 기하평균 값을 가지며 Q 값은 반파장 공진기와 유사한 특성을 보였다.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.96-101
• /
• 2020

In this paper, we present the results of our research to perform 3D laser scanning functions by adding a focusing lens to a conventional 2D laser scanner. For the optical design, the ray-tracing technique was used along with a total of four lenses as the variable incident focusing lens, the collimating lens, and the F-Theta lens. As design variables, the curvature of the incident focusing lens (Lens #1) was assumed to be us, l mm and sumed mm, and the incident angles were set at 0cidenus, l. In addition, the distance between the focusing lens and the collimating lens was set to vary from 5 mm to 15 mm. When the incident focal length was varied from 5 mm to 15 mm, the exit focal length was calculated to vary from 67.5 mm to 56.8 mm for the lens with R = 100 mm and from 108.5 mm to 99.0 mm for the lens with R = 150 mm. When the incident angle was 0°, the focal aberration was only slightly observable at 10㎛ in both the x- and y-direction. At 7.5° was the focal aberration of approximately 20~50㎛ was measured at 20㎛. To investigate the chromatic aberration of the designed optical device, the distortion of the focus was observed when the 550 nm beam was simulated on lens designed for a 980 nm wavelength.

• 천문학회보
• /
• 제40권2호
• /
• pp.37.1-37.1
• /
• 2015

It is suggested that relativistic jets associated with active galactic nuclei (AGNs) can have great impacts on the evolution of the host galaxy. However, the physical properties of AGN jets including the formation mechanism are not well known to date, and hence the AGN feedback on the host galaxy is yet poorly understood. OVV 1633+382 as a highly variable AGN source (a.k.a. blazer) with a compact core and very well developed jet components is an excellent laboratory to study the jet formation mechanism of radio-loud AGN. Near 2002, a major flare was reported at mm wavelength with a dramatic increase of the flux, which is likely to be followed by a dense and bright outflow. In order to probe the evolution of the innermost region of this radio-loud AGN, we have monitored using the Very Large Baseline Array (VLBA) and the Effelsberg 100m single-dish radio telescope in 12 epochs from 2002 and 2005. The observations were conducted at 22, 43 and 86 GHz in full polarization mode. In this work, we present the intensity and spectral index maps at 22 and 43 GHz from our monitoring observations. We probe the kinematics and geometry of individual jet components to discuss the evolution of the jet.

• 대한수의학회지
• /
• 제41권1호
• /
• pp.13-19
• /
• 2001

A simple and rapid analytical method for the determination of tylosin in chicken, pork and muscle was established by High-Performance Liquid Chromatography(HPLC). Chicken, pork and beef muscle(5 g) were fortified by adding the $0.2{\mu}g/ml$ of standard tylosin and the drug was extracted from meats with 70% acetonitrile(ACN) and followed by liquid-liquid partition for clean-up procedure. Then $20{\mu}l$ portion of ACN elution was directly analyzed by HPLC with spectra 100 variable wavelength detector, and unfortified blank control were treated similarly. The average recovery rate of tylosin added to chicken, pork and beef muscle were $83{\pm}2.3$, $96{\pm}3.3$ and $92{\pm}1.6$(%) at the level 0.2 ppm, respectively. No tylosin residues in marketing meats. These results suggested that HPLC methodology could be acceptable for the extraction, determination and screening of tylosin residues in edible meats.

• 한국전기전자재료학회논문지
• /
• 제20권8호
• /
• pp.726-730
• /
• 2007

Two dimensional photonic crystals (2D PCs) have been fabricated by a double exposure holographic method using a He-Cd laser with a wavelength of 442nm. The arrays of the 2D PCs exhibit variable lattice structures from square to triangle according to a change of rotating angle $({\gamma})$ for double exposure beams. In addition, the period and filling factor of PCs as well as the forms (dot or antidot) could be controlled by experimental conditions. $A l.18-{\mu}m-thick$ resist was spin-coated on Si substrate and the 1st holographic exposure was carried out at incident angle $({\theta})$ of $11^{\circ}$. Then the sample was rotated to ${\gamma}=45^{\circ}{\sim}90^{\circ}$ and the 2nd holographic process was performed at ${\theta}=11^{\circ}$. The variation of diffraction efficiency during the exposure process was observed using a He-Ne laser in real time. The images of 2D PCs prepared were analyzed by SEM and AFM. We believe that the double holographic method is a tool suitable to realize the 2D PCs with a periodic array of large area.