• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1623-1629
• /
• 2001

This parer presents a CVT line pressure control strategy for the increased shift speed. Firstly, an algorithm to increase the CVT shift speed is suggested based on a modified CVT shift dynamics and shift speed maps are constructed. In addition, simplified dynamic models of the line pressure and the ratio control valve are derived by considering the CVT shift dynamics, and low level control algorithms for the ratio and the line pressure control are proposed. Using the shift speed maps and the simplified dynamic models of the CVT system, shift performance is investigated. It is found from the experimental and simulation results that improved shift speed can be achieved by increasing the lilly pressure.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1002-1003
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, another is to choose the strong modulation method which sends signals to long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. AWGN, impulse noise and attenuation are created. To overcome the noise and attenuation. Multi-carrier Modulation methods like as OFDM and DMT which divide the channel into many sub-channel are powerful communication methods for PLC. In this paper, PLC channels are simulated for getting BER by Matlab simulink

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3E
• /
• pp.18-24
• /
• 2001

Speaking rate represents how many phonemes in speech signal have in limited time. It is various and changeable depending on the speakers and the characters of each phoneme. The preprocessing to remove the effect of variety of speaking rate is necessary before recognizing the speech in the present speech recognition systems. So if it is possible to estimate the speaking rate in advance, the performance of speech recognition can be higher. However, the conventional speech vocoder decides the transmission rate for analyzing the fixed period no regardless of the variety rate of phoneme but if the speaking rate can be estimated in advance, it is very important information of speech to use in speech coding part as well. It increases the quality of sound in vocoder as well as applies the variable transmission rate. In this paper, we propose the method for presenting the speaking rate as parameter in speech vocoder. To estimate the speaking rate, the variety of phoneme is estimated and the Line Spectrum Pairs is used to estimate it. As a result of comparing the speaking rate performance with the proposed algorithm and passivity method worked by eye, error between two methods is 5.38% about fast utterance and 1.78% about slow utterance and the accuracy between two methods is 98% about slow utterance and 94% about fast utterances in 30 dB SNR and 10 dB SNR respectively.

• Korean Journal of Animal Reproduction
• /
• v.22 no.3
• /
• pp.237-244
• /
• 1998

To investigate the fidelity of transgene transmission and expression, we produced transgenic mice carrying bovine $\beta$-casein/bovine grwoth hormone(bGH) fusion gene and examined transmission efficiency and expression level of the transgene in the founders and their progeny. The transgene was composed of 1.8 kb bovine $\beta$-casein promoter and 2.1 kb bGH gene. Ten transgenic mice were produced. Milk and mammary gland were collected from eight transgenic lines at 10-day lactation and a, pp.ied to Western and Northern blot analyses. The bGH expression was detected in four of them. The concentrations of bGH in milk were highly variable from 4$\mu\textrm{g}$/ml to 600$\mu\textrm{g}$/ml depending on the lines. The bGH mRNA level in mammary gland was closely correlated with the bGH concentration in milk in each transgenic line. These results indicated that bGH transgene expression was a, pp.opriately regulated in the mammary gland and secreted into milk in transgenic mice. By using two transgenic lines(#2, #7) secreting a considerable amoung of bGH into their milk, the inferitance and maintenance of transgenic phenotype were assessed in successive four generations. The mean transmission frequencies of transgene in lines #2 and #7 were 34% and 40%, respectively. The bGH concentration in milk were 80, 240, 120, 60$\mu\textrm{g}$/ml in each G0(generation 0), G2, G3, G4 generation of line #2 and 600, 1600, 860, 900$\mu\textrm{g}$/ml in each G1. G2, G3, G4 generation of line #7. These results demonstrated that bovine $\beta$-casein/bGH gene was stably transmitted from generation to generation in a Menelian fashion in trasgenic mice and consistenly expressed in their milk throughout the generations, although there was a little variation in the transmission frequency and expression level of the transgene between generations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.668-674
• /
• 2009

In this paper, we design and implement a high speed power-line communication modem, supported up to the transmission rate of 480kbps in a lower frequency band of under 450kHz. The power-line channel model is discussed in the sense of the lower frequency band, and the transmission technique of OFDM(Orthogonal Frequency Division Multiplexing) is considered to improve the throughput effectively. According to the power-line channel variation, the designed modem can select the modulation mapping between a 16-QAM(Quadrature Amplitude Modulation) or a QPSK(Quadrature Phase Shift Keying). Thus, it makes a sufficient QoS even in a poor channel environments. With a implementation result, we show that it gives a variable transmission rate of 480kbps or 240kbps in the signal bandwidth of $50kHz{\sim}450kHz$.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.409-412
• /
• 2001

This paper decides provision of brightness by average value of horizontal pixel, vertical pixel association. Give weight at association value calculation to improve diagonal line characteristics, and applied method to add average of vertical pixel and average of diagonal line pixel at interpolation. Therefore it improves PSNR, and it proposed algorithm that improve horizontal outline and vortical outline characteristics in big area of luminance contrast. It changed scanning line of serial scan based on proposed algorithm and designed variable image system for efficient data transmission through PCI interface circuit.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.100-105
• /
• 2002

This paper represents impedance calculation of the distance relay using PSCAD/EMTDC software for transmission line involving the UPFC(Unified Power Flow Controller)device, which is the most vigorous component of FACTS. The presence of the UPFC significantly affects the line parameters of transmission system, which are also influenced by the distance relay setting. Moreover, depending on the UPFC location and its parameters, zones of setting the distance relay will be changed. The presence of the UPFC in the fault loop affects both voltage and current seen by relay. Therefore, the distance relay should be taken into account the variable injected voltage of the UPFC.

• Wind and Structures
• /
• v.18 no.3
• /
• pp.235-252
• /
• 2014

An effective numerical technique to calculate the reactions of a multi-spanned transmission line conductor system, under arbitrary loads varying along the spans, is developed. Such variable loads are generated by High Intensity Wind (HIW) events in the form of tornadoes and downburst. First, a semi-closed form solution is derived to obtain the displacements and the reactions at the ends of each conductor span. The solution accounts for the nonlinearity of the system and the flexibility of the insulators. Second, a numerical scheme to solve the derived closed-form solution is proposed. Two conductor systems are analyzed under loads resulting from HIW events for validation of the proposed technique. Non-linear Finite Element Analyses (FEA) are also conducted for the same two systems. The responses resulting from the technique are shown to be in a very good agreement with those resulting from the FEA, which confirms the technique accuracy. Meanwhile, the semi-closed form technique shows superior efficiency in terms of the required computational time. The saving in computational time has a great advantage in predicting the response of the conductors under HIW events, since this requires a large number of analyses to cover different potential locations and sizes of those localized events.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1093-1101
• /
• 2015

Partial Discharge (PD) is a physical phenomenon, which causes defects and damages to the insulation. This phenomenon is regarded as the most important source of fault and defect in power transformers. Therefore, methods of high speed and precision are considered of special importance for the maintenance of transformers in localization of the origin of partial discharge. In this paper, the transformer winding is first modeled in a transient state by using RLC ladder network and multiconductor transmission line (MTL) models. The parameters of the two models were calculated by Ansoft Maxwell software, and the simulations were performed by Matlab software. Then, the PD pulses were applied to the models with different widths of pulses. With regard to the fact that the signals received after the application of PD had a variable frequency nature over time, and based on the wavelet transform and signal energy, a new method was presented for the localization of PD. Ultimately; the mentioned method was implemented on a 20 kV winding distribution transformer. Then, the performances of the models used in this paper, including RLC and MTL models, were compared in different frequency bands for the correct distinction of partial discharge location.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.251-256
• /
• 2018

In the case of a radar repeater that used for the trajectory tracking of a high-speed aircraft, it emits pulses of short width. For phase displacement of these signals a branch type phase shifter is used. The phase on the transmission line is changed by utilizing the variable reactance at the end of the displacement branch transmission line. Further, it is easy to control the high output signal, and there is an advantage that the insertion loss is not large even when the reactance fails. In this paper, we will discuss the fabrication test results of a 400 W class phase shifter that sequentially displaces the phase at $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$.