• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.385-391
• /
• 2016

We demonstrated experimentally a variable optical frequency comb source using a cascaded dual parallel Mach Zehnder modulator (DPMZM) and a phase modulator (PM). With this simple configuration and applying low drive voltages, we generated variable comb source composed of spectral lines 3, 5, 7, 9 and 11 with 10-GHz frequency spacing, also generated 2 and 3 spectral lines with 20 GHz frequency spacing. The generated comb source maintains high spectral coherence across the entire bandwidth with good spectral flatness (within 1-dB for 2, 3, 5, 7 comb lines, within 2-dB for 9-comb lines and within 3-dB for 11 comb lines). The flat and variable comb source is mainly achieved by manipulating 6 operating parameters of DPMZM, setting RF amplifier gain, connected at phase modulator and phase shifters. Hence the method is simple and offers great flexibility in achieving flat and variable comb spectrum, which is experimentally demonstrated. This brings advantages of power efficiency due to low driving voltages, simplicity and cost effectiveness to the system.

• 오토저널
• /
• 제15권2호
• /
• pp.112-120
• /
• 1993

Variable thickness plates are commonly encountered in the majority of mechanical/structural components of industrial applications. And, as a result of the unsymmetry of the structure or the load and the anisoptropy of the materials, the cracks in engineering structures are generally subjected to combined stresses. In spite of considerable practical interest, however, a few fracture mechanics study on combined mode crack in a variable thickness plate have carried out. In this respect, combined mode 1/3 stress intensity factors $K_{1}$ and $K_{3}$ at the crack tip for a variable thickness plate were obtained by 3-dimensional finite element analysis. Variable thickness plates containing a central slant crack were chosen. the parameters used in this study were dimensionless crack length .lambda. crack slant angle .alpha, thickness ratio .betha. and width ratio .omega. Stress intensity factors were calculated by crack opening displacement(COD) and crack tearing displacement(CTD) method proposed by Ingraffea and Manu. The effect of thickness ratio .betha. on $K_{1}$ is relatively great in comparison to $K_{3}$.

• Coupled systems mechanics
• /
• 제11권4호
• /
• pp.357-371
• /
• 2022

This paper presents a parametric study on the free vibration analysis of a functionally graded material (FGM) circular plate with non-uniform thickness resting on a variable Pasternak elastic foundation. The mechanical properties of the material vary in the transverse direction through the thickness of the plate according to the power-law distribution to represent the constituent components. The equation of motion of the circular plate has been carried out based on the classical plate theory (CPT), and the differential quadrature method (DQM) is employed to solve the governing equations as a semi-analytical method. The grid points are chosen based on Chebyshev-Gauss-Lobatto distribution to achieve acceptable convergence and better accuracy. The influence of geometric parameters, variable elastic foundation, and functionally graded variation for clamped and simply supported boundary conditions on the first three natural frequencies are investigated. Comparisons of results with similar studies in the literature have been presented and two-dimensional mode shapes for particular plates have been plotted to illustrate the effect of variable thickness profile.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.501-504
• /
• 1995

A Simultaneous optimal design of structural and control system of a semi-active suspension is applied on a helf-car model in this paper. Suspension stiffnesses and dampings are selected as structural design parameters and damping forces of variable dampers as controller parameters. Sence this optimization problem is of large discontinuous space, conventional exhaustive methods are not enough. So we here try out an approach using Genetic Algorithm for our problem. Through numerical simulation work, the performance of the simultaneously optimized system was tested and showed meaningful improvement over the partially optimized ones.

• ETRI Journal
• /
• 제16권3호
• /
• pp.27-41
• /
• 1994

This paper provides a performance study of multistage interconnection networks in packet switching environment. In comparison to earlier work, the model is more extensive - it includes several parameters such as multiple-packet messages, variable buffer size, and wait delay at a source. The model is also uniformly applied to several representative networks and thus provides a basis for fair comparison as well as selection of optimal values for parameters. The complexity of the model required use of simulation. However, a partial analytical model is provided to measure the congestion in a network.

• 대한전기학회논문지
• /
• 제41권4호
• /
• pp.355-361
• /
• 1992

In this paper, some rules for auto- tuning of feedback-feedforward controller in variable load and disturbance are presented. The parameters of feedback PID controller are determined by heuristic rules based on input regulation experiment, and the parameters of feedforward controller are determined by result rules based on spectral factorization, minimum variance, and polynomial equation. These heuristic and result rules are used as an element of the feedback loop in an auto-tuning feedback-feedforward controller. The robust and accurate control performance is demonstrated by computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.367-369
• /
• 1986

Guaranteed cost control is a method applicable to a class of systems with uncertain parameters that guarantees an upper bound of the cost functional. This paper is concerned with a matrix decomposition technique used to yield a reasonable upper bound of the cost functional for a finite-time LQ regulator problem. The uncertain linear systems dealt with in this paper are described by a set of state equations of single-input phase-variable canonical form which contain unknown but bounded uncertain parameters.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.46-50
• /
• 1989

Methods for the estimation of the coefficient matrices in the equation of motion for a linear multi-degree-of-freedom structure arc studied. For this purpose, the equation of motion is transformed into an auto-regressive and moving average with auxiliary input (ARMAX) model. The ARMAX parameters are evaluated using several methods of parameter estimation; such as toe least squares, the instrumental variable, the maximum likelihood and the limited Information maximum likelihood methods. Then the parameters of the equation of motion are recovered therefrom. Numerical example is given for a 3-story building model subjected to an earthquake exitation.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.923-931
• /
• 2005

The two parameter generalized exponential distribution was recently introduced by Gupta and Kundu (1999). It is observed that the generalized exponential distribution can be used quite effectively to analyze skewed data set. This paper develops the accelerated life test model using generalized exponential distribution and considers maximum likelihood estimation of parameters under the tampered random variable model. To show the performance of proposed maximum likelihood estimates, some simulation will be performed. Using a real data set, an example will be given.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.725-727
• /
• 1998

It is difficult to determine the controller parameters that we can get optimum response of the controlled process variable. In this paper we investigate the effects of various elements of which a gas turbine MW control loop is consists. And we describe the result of actual adjustment on the parameters of these elements to improve the speed regulation of a gas turbine.