• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.696-708
• /
• 2002

In this paper, a novel transcoding algorithm for the Adaptive Multi Rate(AMR) and the Enhanced Variable Rate Codec(EVRC) vocoders via direct parameter transformation is proposed. In contrast to the conventional tandem transcoding algorithm, the proposed algorithm converts the parameters of one coder to the other without going through the decoding and encoding processes. The proposed algorithm consists of the parameter decoding, frame classification, mode decision, and transcoders for two frame types. The transcoders convert the parameters such as LSP, frame energy, pitch delay for the adaptive codebook, fixed codebook vector, and codebook gains. Evaluation results show that while exhibiting better computational and delay characteristics, the proposed algorithm produces equivalent speech quality to that produced by the tandem transcoding algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.136-144
• /
• 2010

Exhaust gas recirculation (EGR) is an emission control technology allowing significant NOx emission reduction from light-and heavy duty diesel engines. The future EGR type, dual loop EGR, combining features of high pressure loop EGR and low pressure loop EGR, was developed and optimized by using a commercial engine simulation program, GT-POWER. Some variables were selected to control dual loop EGR system such as VGT (Variable Geometry Turbocharger)performance, especially turbo speed, flap valve opening diameter at the exhaust tail pipe, and EGR valve opening diameter. Applying the dual loop EGR system in the light-duty diesel engine might cause some problems, such as decrease of engine performance and increase of brake specific fuel consumption (BSFC). So proper EGR rate (or mass flow) control would be needed because there are trade-offs of two types of the EGR (HPL and LPL) features. In this study, a diesel engine under dual loop EGR system was optimized by using design of experiment (DoE). Some dominant variables were determined which had effects on torque, BSFC, NOx, and EGR rate. As a result, optimization was performed to compensate the torque and BSFC by controlling start of injection (SOI), injection mass and EGR valves, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.578-590
• /
• 2015

The present study examines the influence of slurry composting and biofiltration liquid fertilizer (SCBLF) treatment on the biomass characteristics of yellow poplar, and the optimization of organosolv pretreatment for sugar production. After SCBLF treatment, total exchangeable cation contents of yellow poplar was increased from $3.1g\;kg^{-1}$ to $4.4g\;kg^{-1}$, and as a result, biomass production of yellow poplar was also enhanced by 82.3%. Organosolv pretreatment was conducted with three independent variables: 1) reaction temperature: $133.2^{\circ}C$ to $166.8^{\circ}C$; 2) acid concentration: 0.2% to 1.8%; and 3) reaction time: 1.6 min to 18.4 min. Reaction temperature was the most significant variable in water insoluble solid (WIS) recovery rate. High overall sugar yield was attained from pretreatment conditions approximately 50% of WIS recovery rate, and the highest overall glucose yield (44.0%) was achieved from pretreatment at $140^{\circ}C$ with 1.5% acid concentration for 5 min. Consequently, 21.1% of glucose and 5.8% of xylose were produced from the organosolv pretreatment of SCBLF-treated 8-year-old yellow poplar.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.317-326
• /
• 1995

The oater level control system of the steam generator in a pressurized water reactor and its control Problems are analysed. In this work a stable control strategy Particularly during low Power operation based on the fuzzy control method is studied. The control strategy employs substitutional information using the bypass valve opening instead of incorrectly measured signal at the low How rate as the fuzzy variable of the flow rate during low power operation, and includes the flexible scale adjusting method for fast response at a large transient. A self-tuning algorithm based on the control performance and the descent method is also suggested for tuning the membership function scale. It gives a practical way to tune the controller under real operation. Simulation was carried out on the Compact Nuclear Simulator set up at Korea Atomic Energy Research Institute and its result showed the good performance of the controller and effectiveness of its tuning.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.4
• /
• pp.1345-1365
• /
• 2018

Following principal-agent relationship between government and funding agency effects on efficiency and management of project, this paper suppose that project management cost rate variable on outsourcing and administration of institution, applies multiple regression analysis and logit analysis by using factors that procurement status of institutional operating expenses and each subordinates scale (Budget, subject number) and method (Top-down/Bottom-up), not a total amount, for examining factors following project efficiency analysis and way of commission. The major variables which effect on efficiency of institution are management cost scale (0.36), institutional operating expenses ratio (-0.47), way of outsourcing, the factors that affect way of outsourcing are portion of project management cost (-38.5) and institutional operating expenses rate (-11.7). This means both legal and financial stability are necessary and it is avoidable moral hazard and adverse selection on principal-agent problem.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.476-482
• /
• 2014

Recently, with the growth of various sensor applications, the need of wireless communication systems which can support variable data rate is increasing. IEEE 802.15.4 LR-WPAN system using 2.45 GHz frequency band is very popular for the sensor applications. However, since LR-WPAN only supports the data rate of 250 kbps, it has a limit to be applied to various sensor networks. Therefore, we define the preamble structure which can support the data rates of 31.25 kbps, 62.5 kbps, 125 kbps, and present the low-complexity hardware architecture for time synchronizer based on double-correlation algorithm which can resist the CFO (carrier frequency offset). Implementation results show that the proposed time synchronizer include the logic slice of 18.36 K and four DSP48s, which are reduced at the rate of 79.1% and 99.4%, respectively, compared with existing architecture.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.453-461
• /
• 2016

Recently, with the growth of various sensor applications, the need of wireless communication systems which can support variable data rate is increasing. Therefore, advanced ZigBee (AZB) systems that support the various data rate under 250 kbps are proposed. However, the preamble structure for AZB systems causes the complexity increase of time synchronization circuits. In this paper, we propose preamble structure and time synchronization algorithm which can solve the problem of the complexity increase of time synchronization circuits. Implementation results show that the proposed time synchronizer for AZB systems include the logic slices of 6.92 k and, which are reduced at the rate of 62.3% compared with existing architecture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1181-1188
• /
• 2007

This paper presents the measured signal performances in the urban environment for the DVB-H parameters such as code rate, burst size, FFT mode and modulation technique to analyze the DVB-H signal performance avaible for the embodiment of single frequency network to improve the frequency efficiency. Measurements were performed for the case for applying and non-applying MPE-FEC technique simultaneously. Results show that the most outstanding performance are found in the case of QPSK modulation, 1/2 code rate, 2 k FFT mode and 512 burst size. In addition, the signal performance by the SFN with 1/8 guard interval becomes superiour in comparision with the measured data from each site and the data from SFN with 1/32 guard interval. The analysis of the results can be instructive for the improvement of the signal performance and broadcasting quality for the terrestrial digital mobile broadcasting service.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.39-47
• /
• 2011

Ergezinger's method, one of the layer-by-layer algorithms used for multilyer perceptrons, consists of an output node and can make premature saturations in the output's weight because of using linear least squared method in the output layer. These saturations are obstacles to learning time and covergence. Therefore, this paper expands Ergezinger's method to be able to use an output vector instead of an output node and introduces a learning rate to improve learning time and convergence. The learning rate is a variable rate that reflects the correlation coefficient between new weight and previous weight while updating hidden's weight. To compare the proposed method with Ergezinger's method, we tested iris recognition and nonlinear approximation. It was found that the proposed method showed better results than Ergezinger's method in learning convergence. In the CPU time considering correlation coefficient computation, the proposed method saved about 35% time than the previous method.

• The Journal of Society for e-Business Studies
• /
• v.17 no.2
• /
• pp.105-114
• /
• 2012

Recently, global warming, energy shortage, and environmental disruption have been serious problems in every nation. It became more and more important to reduce the emission of CO2 and to use of energy efficiently. Smart grid was also introduced using the rapidly developing information technology. It deployed the mutual communication concept between customers and the suppliers in the electricity supply. There were increasing demands to adopt the smart meter and to present incentive for efficient energy usage in many developed countries. The objective of this research was to develop the optimal real time pricing model which maximized the profit of the power retailer and reduced the usage of energy. The simulation study was given to show the usefulness of the model. Simulation considered the customer demand response rate and price elasticity rate. The price elasticity rate was compared in the condition of fixed value according to time and variable value according to the customers. The optimal price model could maximize the profit of the power retailer and reduce the energy usage of the consumers.