• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.152-156
• /
• 2000

A Switched Reluctance Motor(SRM) has been widely studied for practical use due to recent development on technology of power electronics. Because of its advantage that are high speed driving, simple structure and easy variable-speed control, it is expected for applications to automo biles and others. However, it has some problems that are, for examples, relatively high torque ripples and electromagnetic noise. In this paper, a simple theory is presented to represent characteristic of a SRM and theoretical results are compared with experimental ones. In the theory, the inductance variations of a SRM are approximated as linear and winding resistances and the magnetic saturation are ignored. With these approximations, we derived some equations expressing load characteristics of a SRM. Also, the torque ripple was removed by applying a variable hysteresis band control.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.145-148
• /
• 1990

In this paper, the problem of designing a feedback controller for a robotic manipulator, which is activated by a D.C. motor through a gear train and a flexible shaft or chain, is considered. When the response of the closed loop control system is relatively slow, a satisfactory controller may be designed as a PID controller. As the speed of the control system increases, however, the spring effect of the linkage becomes profound, and as a result, the transient response exhibits a substantial oscillation. To eliminate this oscillation, it is necessary to design the controller based on at least a fourth order system model. This, in turn, requires the feedback of the entire state variables. In practice, however, only the position of the manipulator and the velocity of the motor are readily measurable. The state variable reconstruction method or a state observer cannot be used because of the system nonlinearities such as the Coulomb frictions. In this study, an alternative controller, which is based on delayed feedback of the output variable only, is proposed, and a successful delayed feedback controller is designed and implemented on an actual experimental manipulator.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.261-263
• /
• 1995

The continuous sliding mode controller with disturbance observer for the tracking control of permanent magnet synchronous motor(PMSM) is presented. In spite of the robust performance of variable structure control, there exists an undesirable chattering problem, which may be very harmful in some cases. To alleviate the problem, continuous sliding mode controller with continuous saturation function is proposed and also the prescribed performance can be obtained by efficient compensation of disturbance. Experimental results using 7.5 kW, 4000 rpm motor which is controlled by TMS320C30 DSP, are shown to demonstrate the usefulness of the proposed algorithm.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.193-198
• /
• 2000

Switched reluctance motor drives have been finding their applications in the variable speed drives due to their relatively low cost, simple and robust structure, controllability and high efficiency. Fuzzy control does not need any model of plant. It is based on plant operator experience and heuristics. Fuzzy control is basically adaptive and gives robust performance for plant parameter variation. This paper deals with the sped control of switched reluctance motor using fuzzy controller with 7-rule based fuzzy logic. The proposed fuzzy controller is superior to the control performance of the conventional PI controller. The fuzzy controller is implemented by 80C196KC, 16 bit one-chip microcontroller.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.736-741
• /
• 1998

It is well known that an encoder or a resolver is necessary to obtain the position data for speed or position control Generally utilized speed sensors are mal-affected by the EMI, dusty, and high temperature surroundings. Therefore, the speed and position sensorless controls using observers have been studied widely. In this paper, the binary observer which is composed of two feedback regulation loops to control the speed of SRM(Switched Reluctance Motor) is applied. One loop compensates the control input directly like the sliding mode control, and the other one compensates the system parameters indirectly. This observer is constructed on the foundation of variable structure control on the foundation of variable structure control theory and has the inertial term for the varying parameter. The validities of this proposed method is proved by experiments.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.654-658
• /
• 2003

In this study a control system with variable gain schedule using real speed and moving direction is proposed to control a Permanent Magnet Linear Synchronous Motor (PMLSM) with Z-axis operation structure. The implementation of the controller is designed on the DSP TMS320C32 board. PMLSM is operated by using 4-point absolute positions profile with each velocity, acceleration and deceleration. The direction of the initial angle action for starting is set from the lower limit point to the upper limit point on PMLSM operation stroke. The effectiveness of a control system with variable gain schedule is demonstrated by some experimental results.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.585-587
• /
• 1998

It is suggested that the PWM inverter is controlled by Digital Software Programming. VVVF(Variable Voltage Variable Frequency) inverter control being used by PWM control for driving the motor with speed-varying, makes the PWM pattern with calculating the output voltage and frequency, and with controlling the carrier and signal, so actually this method is difficult to correspond with driving the motor by using voltage-varying and frequency-varying. Therefore this research suggested the new algorithm controlled by micro processor which is already stored by various PWM form of output voltage by using fundamental data of the carrier and signal. The PWM wave can be controlled with real time by using extra hardware and digital software and to speed up program processing, the control signals to switch the power semi-conductor of three phase PWM inverter, simultaneously use the output signal by microprocessor and extra hardware, and control signal by software. In the end, this method was proved by applying to Three Phase Voltage-type Inverter.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2073-2075
• /
• 1998

A cylindrical type Linear Pulse Motor (LPM) was designed as a linear motion actuator. In this paper, it is mentioned the mechanical design method of the LPM. It was designed as a prototype to estimate a new linearization control method for the nonlinear thrust force which is caused by the variable reluctance of the LPM. The designed LPM is determined a variable reluctance type to except the term of permanent magnetic force. The concreted figures and the dimensions will be described.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.270-272
• /
• 1994

A new current control technique for inverter-fed vector controlled induction motor drives is presented. Using a integral variable structure control(IVSC) approach, the current controller is designed in the stationary rotating reference frame. The chattering reduction technique is also considered by the full state flux observer. By employing the proposed control scheme, a good control performance is achieved in the transient and steady state. The effectiveness of the proposed scheme is demonstrated through the comparative simulations.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.452-455
• /
• 1997

It is well known that Variable Structure Controller(VSC) is robust to parameters variation and disturbance but its performance depends on the design parameters such as switching gain and slope of sliding surface. This paper proposes a more robust VSC that is composed of local VSC's. Each local VSC considers the local system dynamics which has narrow parameter variation and disturbance. We optimize the local VSC's by use of Evolution Strategy, and then we use Artificial Neural Network to generalize the local VSC's and construct the overall VSC in order to cover the whole range of parameter variation and disturbance. Simulation on BLDC motor current control has verified the proposed VSC is superior to the conventional VSC.