• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.93-101
• /
• 1995

The evaluation of the logic capability and the library generation method of the multiplexor-based logic module is described. Optimizing logic module for silicon area and logic capability is essential to build a efficient FPGAs(Field-Programmable Gate Arrays). Because the multiplexor-based logic module can implement a large number of functions, it presents difficulties for library-based approaches. However, the logic functions of the logic module can be significantly reduced by lmiting the number of variables and sum-of-products and by removing same functions with different variable ordering using algorithm presented in this paper.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1376-1378
• /
• 2002

Compare and examined Full Auto Line of PV module Manufacture Equipment and PV module Manufacture Equipment in the Korea. Full Auto Line has been constructed with Cell Selection. Tabbing & Stringing. Module Setting, Lamination, Curing and Module Testing, and Module Manufacture Line in the Korea has been constructed with Tabbing & Stringing. Module Setting, Lamination and Module Testing. Laminator's temperature Control is the most important Variable in Manufacture of PV module. Temperature Transformation of Center part of PV module is most high at Lamination, and Edge part is most low.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.261-265
• /
• 2023

In this paper, we analyzed the transformation of the power following by the angle of incidence of the solar, the angle of photovoltaic module and artificial solar changed from 30° to 90° and synchronously changed the distance from 0.1 m to 0.5 m. Setting the distance between the artificial solar and the luminometer from 0.1 m to 0.5 m and set the angles to 90°, 60°, 45°, and 30°, the angle was 90° and when the distance was 0.1 m, the maximum Illuminance was 19,580 lux, the light could be obtained more. If the angle of incidence between the Artificial solar and the photovoltaic module was 90° and the variable resistance was 1,000 Ω at a distance of 0.4 m, the maximum power reached 0.82 W. Provided that the angle of incidence between the artificial solar and the photovoltaic module was 90° and the distance was 0.2 m since the variable resistance had the maximum power of 500 Ω, the maximum power was 0.78 W. At 1,000 Ω, the maximum power is 0.80 W so the maximum power at the variable resistance 1,000 Ω could obtain higher power than the variable resistance 500 Ω. The variable resistance was 1,000 Ω and the angle of incidence between the Artificial solar and the photovoltaic module was 90° at a distance of 0.4 m, and the maximum power reached 0.82 W. The angle was 60° at 0.3 m and 0.4 m the maximum power reached 0.10 W. The angle was 45° at 0.2 m maximum power reached 0.020 W, the angle was 30° at 0.4 m, and the maximum power reached 0.004 W. In four results about maximum power depending on the angle of incidence between the artificial solar and the photovoltaic module, the luminous efficiency and maximum power can be got the best at an angle of 90°.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.260-268
• /
• 2020

Currently, it is usually a 3D scanner processing method as a laser method. However, the laser method has a disadvantage of slow scanning speed and poor precision. Although optical scanners are used as a method to compensate for these shortcomings, optical scanners are closely related to the distance and precision of the object, and have the disadvantage of being expensive. In this paper, 3D scanner using variable focus lens-based structured light module with improved measurement precision was designed to be high performance, low price, and usable in industrial fields. To this end, designed a telecentric optical system based on a variable focus lens and connected to the telecentric mechanism of the step motor and lens to adjust the focus of the variable lens. Designed a connection structure with optimized scalability of hardware circuits that configures a stepper motor to form a system with a built-in processor. In addition, by applying an algorithm that can simultaneously acquire high-resolution texture image and depth information and apply image synthesis technology and GPU-based high-speed structured light processing technology, it is also stable for changes to external light. We will designed and implemented for further improving high measurement precision.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1391-1395
• /
• 2011

In this paper, would implement a transceiver for the visible light communication that based on wireless communication driving technology for LED illumination-based infrared ray communication, and measurement analyzed a design error rate of a transceiver variable rate has made about distance change -2.5m. The error rate measured a voltage variable along illuminate change between switchable circumstances, which has illuminated insight and outright. Each analyzed and measurement on the communication distance errors along the differences of disturbance light between night and days. The LED module has implemented for number of 6 through illumination dimming in case of different values. Also, implementation for the system module of a VLC transceiver based on the infrared sensors which used feedback outcome value has analyzed with error rate.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.28-37
• /
• 2018

It is necessary to produce and maintain interior lighting design reasonably and actively. Based on the lighting design applicable to interior design, the purpose of this study is to take into consideration the public design of public facilities installed in neighborhood parks and thereby to suggest a module-type variable interior lighting product design for reasonable use. To achieve that, relevant studies were reviewed to find the basic concepts of a module and the best cases of interior lighting applicable to interior design. To draw a new concept of the lighting design to which the concept of a module is applied, this study suggested the design direction for practical product development and a module-type design featuring easy process, product storage, assembly, and management, analyzed the reasonable maintenance direction for the development of lighting design, and proposed a case of design development applicable to the development of a new product design. Through cognitive strategy process, the design was made. This process, as a conceptual strategy, included the step of interior environment analysis, the step of lighting maintenance, the step of variable mechanism, and the step of emotional activation. These steps were connected with formative beauty of design so as to suggest a MLD(Module Lamp Design) strategy. In this way, this study tried to connect humans' free application for a space to a module product and to apply humans' visual approach and free conceptual value to MLD cognitive strategy design process for development.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.768-776
• /
• 1994

This paper describes computer-aided forging design for rib/web shaped parts. In manufacturing a part by means of forging process, the first step is to design the forging. This is done by modifying the given machined part geometry according to the requirements of the forging process. Traditionally, this is done by experienced forging designers using empirical forging design guidelines. Generally, it would be neither possible nor practical to develop a system which encompasses the design of all types of forgings. Accordingly, forging design can be simplified by considering critical two dimensional cross sections of the machined part geometry. This system is composed of three modules(process variable decision module, forging design module and redesign module) and each module is carried out in regular sequence. In the process variable decision module, first of all, the undercut is checked and modified, and then deep recesses and holes difficult to forge are eliminated. Also parting line, forging plane, forging plan view area, forging weight and maximum size(maximum height or width)are determined. In the forging design module, the magnitude of various allowances, draft angle, minimum web thickness, corner and fillet radius are determined and then geometry modification is performed. Finally, since the design rules and databases used in this system are based on parameters of the forging geometry, such as the trimmed forging plan area, forging weight, forging maxmum size, plausible estimates need to be made for these parameters. Therefore, in the re-design module, the design process is iterated until a satisfactory forging is obtained.

• Journal of the Korea Furniture Society
• /
• v.24 no.3
• /
• pp.247-256
• /
• 2013

A dormitory is the most important compound space to college students who have to live with others. Also, for the students living in the boarding area, the dorm space can be the space for learning, exchanges and cultural. These Housing environment is a public space, so this is based on Universal Design. However, the 1970s-built dormitory space for the current user is narrow and not right for furniture standard. In this study, in order to compensate for these problems, the design directions are based on the previous studies - Park, Young-Soon, 2008, 'A Proposal on Dormitory Furniture Design for University Students.' Based on the previous study, the type of variable design is designed for desks, bookcases, beds, wardrobes, and other cabinets as representative household types. Furthermore, these furnitures are assembled and transformed depend on the dormitory space for single, double and four students. The furniture assembly system and arrangement module are presented in the direction of three kinds of designs. Therefore, three meaning of this study are the development of design to be used each item, the realization of custom furniture for space and presenting variable design module.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.383-384
• /
• 2007