• 한국항공우주학회지
• /
• 제37권9호
• /
• pp.843-854
• /
• 2009

우리나라의 달탐사를 위하여, 저추력을 이용한 최적의 지구-달 천이궤적 설계를 진행하였다. 탐사선의 추력 형태는 등저추력과 가변저추력 모두를 적용하였으며 각각에 대한 탐사선의 지구 출발부터 달 포획에 이르는 전반적인 모든 단계에 대한 비행 궤적이 설계되었다. 보다 실질적인 우주 환경의 모사를 위하여 행성의 정밀 위치는 JPL의 정밀 천체력인 DE405 천체력을 이용하였으며 지구, 달, 태양의 중력에 의한 섭동과 지구 $J_2$항에 의한 영향을 포함한 N-체의 동력학 방정식이 사용되었다. 탐사선이 지구 근처에 있을 때, 추력의 방향각은 항상 거리의 접선방향이고, 가변저추력을 이용한 경우가 등저추력을 이용한 경우보다 연료를 약 5% 정도 더 절감할 수 있음을 확인하였다. 본 연구에서 구현 및 제시된 저추력을 이용한 최적의 달 탐사 임무 설계 알고리즘과 그 결과는 미래 한국의 달 탐사를 대비하는데 있어서 많은 사전 지식을 제공할 것이며 장차 심화된 임무 설계를 위한 알고리즘의 기반으로 사용될 수 있다.

• 항공우주기술
• /
• 제7권1호
• /
• pp.91-98
• /
• 2008

제 2의 우주경쟁 시대를 맞이하여 세계 각국은 달을 선점하기 위한 치열한 경쟁을 벌이고 있다. 달에 영구기지를 2020년까지 건설하겠다는 미국을 비롯하여 유럽, 일본, 중국은 달탐사선을 성공적으로 발사하였으며 인도는 발사를 준비 중이다. 이와 같은 국제적인 분위기 속에 우리나라도 2020년까지 달에 탐사선을 보낼 계획을 발표하였다. 본 연구에서는 가변저추력을 이용한 달탐사 위성 설계에 기본 자료로 사용될 수 있는 달탐사 임무궤도를 설계하였으며, 이를 바탕으로 SMART-1과 비슷한 제원을 갖는 가상의 달탐사 임무를 설정하여 비행궤적을 산출하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.358-360
• /
• 1996

LPM(Linear pulse motor) has made linear motions by itself. And the LPM has higher thrust force ratio to mass and more wide driving speed lunges comparing with the conventional rotating type motors. However, there are the thrust force ripples in the LPM, which are produced by the mechanical structures and nonlinear back emf. It makes to hesitate the practical applications of LPM. Especially, it becomes needed to reduce the thrust force ripples for practical, which needs relative low driving speeds. For reducing the thrust force ripples, in the first place, it was built a new nonlinear linkage flux equations of the LPM. In these equations, the influence of permanent magnetic and variable reluctance thrust force components were considered. In this paper, some experimental results in the modeling of LPM are shown and detent lone and holding force characteristics of LPM are measured.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.132-142
• /
• 1999

In this paper, a new formula for primary and secondary thrust of metal belt CVT is proposed considering variation of band tension, block compression and active arc for each of the primary and secondary pulleys. For the secondary thrust, effective friction coefficient is introduced considering the effect of flange deflection. Nondimensional primary and secondary thrust of the metal belt CVT by the new formula agree well with the experimental results except for low torque range, $0\;<\;{\lambda}\;<\;0.2$ at speed ration i = 1.0. The new formula can be used in design of the primary and secondary thrusts control system for the metal belt CVT.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.1-7
• /
• 2006

Euler and Navier-Stokes flow analyses for helicopter rotor in hover were performed as low and high fidelity analysis models respectively for the future multidisciplinary design optimization(MDO). These design-oriented analyses possess several attributes such as variable complexity, sensitivity-computation capability and modularity which analysis models involved in MDO are recommended to provide with. To realize PC-based analyses for both fidelity models, reduction of flow domain was made by appling farfield boundary condition based on 3-dimensional point sink with simple momentum theory and also periodic boundary condition in the azimuthal direction. Correlations of thrust, torque and their sensitivities between low and high complexity models were tried to evaluate the applicability of these analysis models in MDO process. It was found that the low-fidelity Euler analysis model predicted inaccurate sensitivity derivatives at relatively high angle of attack.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.779-783
• /
• 2004

First this paper introduces an advanced FADEC (Full Authority Digital Electric Control) for current and future jet engines.It is designed to realize not only stable thrust control, but also performance improvement, reliability enhancement, service life extension, etc. It can be built by using current micro-processor with high computational power and there exists no difficulties but reliability problem of the micro- processor. Next, the simulation results of SFC minimization control are shown. The target engine is a supersonic, low-bypass ratio, 2-spool, combined cycle turbofan, designated as HYPR90T, which consists of a turbo engine for under Mach 3 flight and a ram engine for over Mach 3 flight. he results can then be used for performance optimization of the engine, which plays important role in the advanced FADEC.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.513-520
• /
• 2004

A steady-state/transient performance simulation model was newly developed for the propulsion system of the CRW (Canard Rotor Wing) type UAV (Unmanned Aerial Vehicle) during flight mode transition. The CRW type UAV has a new concept RPV (Remotely Piloted Vehicle) which can fly at two flight modes such as the take-off/landing and low speed forward flight mode using the rotary wing driven by engine bypass exhaust gas and the high speed forward flight mode using the stopped wing and main engine thrust. The propulsion system of the CRW type UAV consists of the main engine system and the duct system. The flight vehicle may generally select a proper type and specific engine with acceptable thrust level to meet the flight mission in the propulsion system design phase. In this study, a turbojet engine with one spool was selected by decision of the vehicle system designer, and the duct system is composed of main duct, rotor duct, master valve, rotor tip-jet nozzles, and variable area main nozzle. In order to establish the safe flight mode transition region of the propulsion system, steady-state and transient performance simulation should be needed. Using this simulation model, the optimal fuel flow schedules were obtained to keep the proper surge margin and the turbine inlet temperature limitation through steady-state and transient performance estimation. Furthermore, these analysis results will be used to the control optimization of the propulsion system, later. In the transient performance model, ICV (Inter-Component Volume) model was used. The performance analysis using the developed models was performed at various flight conditions and fuel flow schedules, and these results could set the safe flight mode transition region to satisfy the turbine inlet temperature overshoot limitation as well as the compressor surge margin. Because the engine performance simulation results without the duct system were well agreed with the engine manufacturer's data and the analysis results using a commercial program, it was confirmed that the validity of the proposed performance model was verified. However, the propulsion system performance model including the duct system will be compared with experimental measuring data, later.

• 항공우주기술
• /
• 제4권2호
• /
• pp.27-35
• /
• 2005

본 연구에서는 에어터보램제트(ATR) 엔진의 탈설계점 성능해석을 위한 코드를 개발하고 이를 이용하여 기 설계된 ATR 엔진에 대한 탈설계점 성능해석을 수행하였다. 미리 정의한 작동 영역 중 중요 작동점을 정의하여 성능해석을 수행하였으며, 작동 영역이 넓음을 고려하여 가변 흡입구 및 가변 노즐을 사용하는 것으로 가정하였다. 각 요소 부품은 탈설계점 성능을 계산할 수 있도록 수학적 모델을 개발하였으며, 이 과정에서 일부 설계 개념을 도입하여 각 요소 부품의 설계 인자에 따른 성능 변화도 계산하였다. 성능해석 결과 기 설계된 엔진은 ATR 비행체의 임무 영역(마하 6.0, 고도 30km)을 모두 달성하기 어렵고, 낮은 마하 수에서 예냉각기의 역할이 크지 않음을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.9-12
• /
• 1999

This paper presents the development of a control architecture for the autonomous underwater vehicle (AUV) with VARIVEC (variable vector) propeller. Moreover this paper also describes the new technique of controlling the servomotors using the Field Programmable Gate Array (FPGA). The AUVs are being currently used fur various work assignments. For the daily measuring task, conventional AUV are too large and too heavy. A small AUV will be necessary for efficient exploration and investigation of a wide range of a sea. AUVs are in the phase of research and development at present and there are still many problems to be solved such as power resources and underwater data transmission. Further, another important task is to make them smaller and lighter for excellent maneuverability and low power. Our goal is to develop a compact and light AUV having the intelligent capabilities. We employed the VARIVEC propeller system utilizing the radio control helicopter elements, which are swash plate and DC servomotors. The VARIVEC propeller can generate six components including thrust, lateral force and moment by changing periodically the blade angle of the propeller during one revolution. It is possible to reduce the number of propellers, mechanism and hence power sources. Our control tests were carried out in an anechoic tank which suppress the reflecting effects of the wall surface. We tested the developed AUV with required performance. Experimental results indicate the effectiveness of our approach. Control of VARIVEC propeller was realized without any difficulty.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.1-14
• /
• 2015

아음속에서 초음속까지 운용되어야 하는 초음속 터빈엔진의 경우, 엔진 운용 공기량이 범위가 넓고 추력 및 연료소모율 등의 엔진 성능에 대해 요구조건이 높으므로 가변시스템 및 이를 제어하기 위한 최적의 제어로직 개발이 반드시 필요하다. 본 연구에서는 압축기 가변 시스템이 적용된 가스터빈 성능해석 모델 및 제어기법을 개발하였다. 그리고 터빈 노즐 가변에 따른 엔진 운용 특성을 분석하였다. 또한 가변 시스템을 구동하는 액추에이터에 대한 개념 설계를 수행 하였다. 저바이패스비 혼합흐름 터보팬 엔진에 대한 탈설계점에서의 성능해석을 수행하였으며, 제어기법을 적용하여 탈설계점에서의 서지마진을 확보할 수 있었다.