• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.80-83
• /
• 1999

Processing of thin films by chemical vapor deposition(CVD) is accompanied by chemical reactions, in which the rigorous kinetic analysis is difficult to achieve. In these conditions, thermodynamic calculation leads to better understanding of the CVD process and helps to optimise the experimental parameters to obtain a desired product. A CVD phase diagram has been used as guide lines for the process. By determining the effect of each process variable on the driving force for deposition, the thermodynamic limit of the substrate temperature for a diamond deposition is calculated in the C-H system by assuming that the limit is defined by the CVD diamond phase diagram. The addition of iso-supersaturation ratio lines to the CVD phase diagram in the Si-Cl-H system provides additional information about the effects of CVD porcess variables.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.168-172
• /
• 1999

The 9 $\mu\textrm{m}$ GaN films on sapphire substrate were grown by Hydride vapor phase epitaxy. Dislocation density of these GaN films was measured by TEM. GaN film with crack free and mirror surface was directly grown on sapphire substrate. The dislocation density of this GaN film was $2{\times}10^9/cm^2$. The surface of GaN film on patterned GaN layer also presented a smooth mirror. But a part of GaN surface included holes because of incomplete coalescence. The dislocation density of GaN film above the mask region was lower than that in the window region. Especially, the dislocation density in the region between mask center and window region was close to dislocation free. The average dislocation density of ELO GaN was $8{\times}10^7/cm^2$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.141-154
• /
• 1996

Intrinsic layers of homoepitaxial InP grown by the hydride vapor phase epitaxy (VPE) technique were investigated by Fourier-transform photoluminescence(FTPL) and variable temperature Hall measurements. The effect of process variables (i.e., source zone temperature and inlet mole fractions of HCl and $PH_{3}$) on the backgroudn impurity levels was investigated. The background carrier concentration was found to decrease with decreasing source zone temperature and increasing HCl, but was relatively independent of $PH_{3}$ for the range of mole fraction studied. The presence of background donors and acceptors was clearly verified in the FTPL spectra, and the major impurities were tentatively identified as Si donors and Zn acceptors as well as some unidentified acceptors.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.707-713
• /
• 1997

HVPE(hydride vapor phase epitaxy)법으로 (111)MgAI$_{2}$ $O_{4}$기판위에 GaN 후막을 성장하였다. GaN를 성장하기 전에 기판에 표면을 GaCI로 처리한 수 성장하였을 때 이중 X선 회절 피크의 반치폭이 710 arcsec로서 N $H_{3}$로 처리한 후 성장한 GaN에 비하여 작았으며, 무색 투명의 경면상태가 얻어\ulcorner다. 113$0^{\circ}C$의 온도에서 성장한 GaN 의 광루미네센스(PL)특성과 동일하게 나타났다. 10K의 온도에서 측정된 PL 스펙트럼은 자유여기자와 속박여기자의 재결합천이에 의한 피크들과 Mg과 관련된 도너-억셉터 쌍 사이의 재결합 및 이의 1LO, 2LO, 3LO 및 4 LO 포논복제에 의한 피크들이 나타났다. 성장된 GaN는 n형의 전도성을나타내었으며, 캐리어 이동도와 농도는 각각 21.3$\textrm{cm}^2$/V ㆍsec와 4.2 x $10^{18}$$cm^{-3}$이었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.2
• /
• pp.125-132
• /
• 2008

The bubble dynamics and heat transfer associated with nucleate boiling in parallel microchannels is studied numerically by solving the equations governing conservation of mass, momentum and energy in the liquid and vapor phases. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. Also, the reversible flow observed during flow boiling in parallel microchannels has been investigated. Based on the numerical results, the effects of contact angle, wall superheat and the number of channels on the bubble growth and reversible flow are quantified.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.8 s.227
• /
• pp.996-1003
• /
• 2004

The bubble motion during nucleate boiling in a microchannel is investigated by numerically solving the equations governing conservation of mass, momentum and energy in the liquid and vapor phases. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. Also, the evaporative heat flux from the thin liquid film that forms underneath a growing bubble attached to the wall is incorporated in the analysis. Based on the numerical results, the effects of channel size, contact angle, wall superheat and waiting period on the bubble growth and heat transfer in a microchannel are quantified.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.73-78
• /
• 2003

The InP thin films grown by metalorganic chemical vapor deposition (MOCVD) are widely used to optoelectronic devices such as laser diodes, wave-guides and optical modulators. Effects of various parameters controlling film growth rate such as gas-phase reaction rate constant, surface reaction rate constant and mass diffusivity are numerically investigated. Results show that at the upstream region where film growth rate increases with the flow direction, diffusion including thermal diffusion plays an important role. At the downstream region where the growth rate decreases with flow direction, film deposition mechanism is revealed as a mass-transport limited. Mass transport characteristics are also studied using systematic analyses.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.550-558
• /
• 1989

Polycrystalline diamond films have been deposited on Si wafer Ly hot W filament CVD method using CH4H2 mixtures. The effects of surface pretreatment, W filament temperature, CH4 volume fraction, and addition of water vapor on the growth rate and morphology of the films were investigated. Surface pretretment was essential for depositing a continuous diamond film. Raising the filament temperature resulted in an increased growth rate and a better crystal quality of the film. As the methane content is varied from 0.5% to 5%, well-faceted crystals gradually transformed into spherical particles of non-diamond phase with a simultaneous increase in the growth rate. Addition of water vapor markedly improved the crystallinity to produce crystalline particles even with 5% methane mixture.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.173-178
• /
• 2019

In this study, we demonstrated a characterization of ${\alpha}-Ga_2O_3$ grown on a cone-shape patterned sapphire substrate by using the halide vapor phase epitaxy. An ${\alpha}-Ga_2O_3$ was grown on different size of PSS and c-plane sapphire substrate for comparison to confirm the effect of PSS. In addition, growth time of ${\alpha}-Ga_2O_3$ was gradually increased to confirm growth mechanism of ${\alpha}-Ga_2O_3$ grown on the PSS. A growth temperature was changed to $470-550^{\circ}C$. It can be analyzed growth conditions and mechanisms on the cone-shape PSS, resulting in a significant decrease in the FWHM value of an asymmetric plane (10-14) of ${\alpha}-Ga_2O_3$, due to lateral growth that occurs during the growth process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.125.2-125.2
• /
• 2016

Semiconductor nanowires are essential building blocks for various nanotechnologies including energy conversion, optoelectronics, and thermoelectric devices. Bottom-up synthetic approach utilizing metal catalyst and vapor phase precursor molecules (i.e., vapor - liquid - solid (VLS) method) is widely employed to grow semiconductor nanowires. Al has received attention as growth catalyst since it is free from contamination issue of Si nanowire leading to the deterioration of electrical properties. Al-catalyzed Si nanowire growth, however, unlike Au-Si system, has relatively narrow window for stable growth, showing highly tapered sidewall structure at high temperature condition. Although surface chemistry is generally known for its role on the crystal growth, it is still unclear how surface adsorbates such as hydrogen atoms and the nanowire sidewall morphology interrelate in VLS growth. Here, we use real-time in situ infrared spectroscopy to confirm the presence of surface hydrogen atoms chemisorbed on Si nanowire sidewalls grown from Al catalyst and demonstrate they are necessary to prevent unwanted tapering of nanowire. We analyze the surface coverage of hydrogen atoms quantitatively via comparison of Si-H vibration modes measured during growth with those obtained from postgrowth measurement. Our findings suggest that the surface adsorbed hydrogen plays a critical role in preventing nanowire sidewall tapering and provide new insights for the role of surface chemistry in VLS growth.