• 한국가스학회지
• /
• 제12권2호
• /
• pp.12-17
• /
• 2008

강화되는 배출가스 규제에 대응하기 위한 대책으로 LPG 차량에 적용되고 있는 제3세대 LPG 연료공급방식인 LPLi(Liquid Phase LPG Injection)은 LPG 연료를 펌프를 이용해서 고압의 액상연료를 공급하는 것이 가장 핵심적인 기술이다. 그러나 LPG 연료의 경우 저점도, 저비등점의 물리적 특성을 갖는 가스연료로서 기존의 가솔린 또는 디젤용 펌프를 사용할 경우 성능 및 효율이 달라질 수 있다. 본 연구에서는 가솔린 연료 펌프의 임펠라 방식을 응용 변형시켜서 LPG연료용으로 개발된 펌프를 이용하여 다양한 온도와 연료조성 조건에서 초기토출성능 및 효율을 파악하고, 기존 펌프의 단점을 극복할 수 있는 펌프방식의 적용가능성 여부를 판단하고자 한다.

• 한국화재소방학회논문지
• /
• 제33권3호
• /
• pp.56-62
• /
• 2019

본 논문은 규정 유량, 양정, 회전수 및 비속도가 각각 0.7 ㎥/min, 8 m, 1750 rpm, 182 m, ㎥/min, rpm인 원심펌프의 운전시 펌프의 회전수와 유량의 변화가 펌프의 운전특성에 미치는 영향을 고찰하였다. 실험에 사용된 펌프는 안내깃이 없고 외주에 바로 접하여 와류실이 있는 볼류트 펌프를 회전수 1350 rpm에서 1750 rpm까지 100 rpm씩의 회전수 변화 5단계에 따른 H-Q특성, L-Q특성, 𝜂-Q특성 등의 관계와 무차원 성능 특성인 양정계수, 동력계수, 효율 등의 특성을 실험을 통하여 다음과 같은 결론을 얻었다. 회전수의 증가에 따라 펌프 성능의 변화정도를 추정할 수 있고, 펌프의 최대효율은 1450 rpm일 때 유량 0.165 ㎥/min, 양정 4.73 m에서 약 52%, 최대 회전수인 1750 rpm일 때 유량 0.183 ㎥/min, 양정 6.72 m에서 약 50%의 효율이 나타난다. 또한 양정 대 유량의 성능 특성 곡선상에서 등효율 곡선은 펌프의 상사법칙에 따른 원점을 지나는 2차식의 곡선으로 나타나지 않고 타원형으로 변형되어 나타난다. 마지막으로 유량계수가 증가함에 따라 동력계수는 증가하고 양정계수는 감소하며, 유량계수가 0.08일 때 최대효율 52% 되는 것을 통해 유량변화가 운전특성에 미치는 영향을 알 수 있다.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.315-323
• /
• 2010

This work investigates the influence of water compressibility on pressure pulsations induced by rotor-stator interaction (RSI) in hydraulic machinery, using the commercial CFD solver ANSYS-CFX. A pipe flow example with harmonic velocity excitation at the inlet plane is simulated using different grid densities and time step sizes. Results are compared with a validated code for hydraulic networks (SIMSEN). Subsequently, the solution procedure is applied to a simplified 2.5-dimensional pump-turbine configuration in prototype with different speeds of sound as well as in model scale with an adapted speed of sound. Pressure fluctuations are compared with numerical and experimental data based on prototype scale. The good agreement indicates that the scaling of acoustic effects with an adapted speed of sound works well. With respect to pressure fluctuation amplitudes along the centerline of runner channels, incompressible solutions exhibit a linear decrease while compressible solutions exhibit sinusoidal distributions with maximum values at half the channel length, coinciding with analytical solutions of one-dimensional acoustics. Furthermore, in compressible simulation the amplification of pressure fluctuations is observed from the inlet of stay vane channels to the spiral case wall. Finally, the procedure is applied to a three-dimensional pump configuration in model scale with adapted speed of sound. Normalized Pressure fluctuations are compared with results from prototype measurements. Compared to incompressible computations, compressible simulations provide similar pressure fluctuations in vaneless space, but pressure fluctuations in spiral case and penstock may be much higher.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3044-3050
• /
• 2015

본 연구는 자동변속기용 유량제어 오일펌프의 성능을 해석하는데 목적이 있다. 이를 위하여 유량제어 오일펌프의 해석적 모델을 개발하였으며 회전속도 변화에 따른 토출유량, 구동토크, 캐비테이션 발생량 등의 내부 유동특성을 분석하여 고찰하였다. 해석결과, 회전속도가 높아짐에 따라 캐비테이션 발생율이 증가하였으며 체적효율은 2200 RPM에서 90%이상으로 나타났지만 회전속도가 상승함에 따라 감소하여 5000 RPM에서 81%까지 줄어드는 것으로 나타났다. 또한 흡입부 초기에 챔버 내 캐비테이션 비율이 20%~30%로 매우 높은 비율을 보였는데 압축에 의해 붕괴 이후의 캐비테이션 비율은 13% 이하로 낮게 형성되었다. 하지만 고속인 5000 RPM에서 17%로 빠른 속도로 발생량이 증가하는 현상도 확인되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제8권3호
• /
• pp.169-182
• /
• 2015

When simulating the dynamic behaviour of a hydro power plant, it is essential to have a good representation of the turbine behaviour. The pressure transients in the system occurs because the flow changes, which the turbine defines. The flow through the turbine is a function of the pressure, the speed of rotation and the wicket gate opening and is, most often described in a performance diagram or Hill diagram. In the Hill diagram, the efficiency is drawn like contour lines, hence the name. A turbines Hill diagram is obtained by performance tests on scaled model in a laboratory. However, system dynamic simulations have to be performed in the early stage of a project, before the turbine manufacturer has been chosen and the Hill diagram is known. Therefore one have to rely on diagrams for a turbine with similar speed number. The Hill diagram is drawn through measured points, so for using the diagram in a simulation program, one have to iterate in the diagram based on curve fitting of the measured points. This paper describes an alternative method. By means of the Euler turbine equation, it is possible to set up two differential equations which represents the turbine performance with good enough accuracy for the dynamic simulations. The only input is the turbine's main geometry, the runner blade in- and outlet angle and the guide vane angle at best efficiency point of operation (BEP). In the paper, simulated turbine characteristics for a high head Francis turbine, and for a reversible pump turbine are compared with laboratory measured characteristics.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.25-30
• /
• 2001

This paper studies the effect of vibration characteristics of tube line conveying fluid with the power steering system of bus. We modelled fluid-filled tube line using I-DEAS software to investigate vibration characteristics of the power steering tube line. And we obtained the natural frequency of tube line through finite element analysis. Analytic solutions were compared with experimental solutions to verify finite element model. We tested the tube line to examine an effect of pressure pulse by vane pump and variation of geometry of tube. From both the experimental results and the modeling results for vibration characteristics of the tube line conveying fluid, we confirmed that vibration characteristics induced by pulse propagated along the power steering tube line and resonance occurred around the natural frequency with pulse excitation.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.200-204
• /
• 2005

A few intake stations have vibration problems caused by pumps, motors and pipes. The vibration transffered from pumps, motors and pipes excites buiding severely. Therefore, the crack is generated on building wall and people who work at intake station are damaged. In this paper, the vibration and noise have been measured and analyzed for pumps, motors, pipes and building at intake station. Also, the cause of vibration and noise is identified. Finally, the reference of vibration and noise is established using results of measurement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.299-303
• /
• 1991

A lamp heated LPCVD equipment has been made. Wafer is heated by an array of fifteen tungsten halogen lamps above the front side of a wafer and pyrometer views the back side of the wafer through $CaF_2$ window. Reactor which consisits of a quartz window and a water cooled-stainless steel plate can be evacuated to $5{\times}10^{-3}$ torr with a rotary vane pump. By pyrolysis of $SiH_4$ at about $600^{\circ}C$, polysilicon has been formed on the silicon dioxide film. The measured results show that thickness nonuniformity is 15% and temperature nonuniformity is 1.1%. Because activation energy of pyrolysis of $SiH_4$ is very high, about 1.8eV, small temperature variation will induce large thickness nonuniformity. The main cause of temperature nonuniformity is unsymmetry of lamp power and an unbalanced cooling structure. Charls & Evans' SIMS result shows that the oxygen content in the deposited polysilicon is comparable to that of silicon substrate but carbon content is ten times higher.

• 유공압시스템학회논문집
• /
• 제6권1호
• /
• pp.1-9
• /
• 2009

This study presents an analytical model of an automotive steering hose containing tuner(flexible spiral metal tube) to reduce the ripple pressure induced by steering vane pump. The double-wall side branch composed in a steering hose containing tuner was analogically considered as a filter in a conduit. Specialized test equipment was manufactured for the estimation of speed of sound in a conduit and measurement of amplitude ratio between the propagated ripple pressures of inlet and outlet of the steering hose. Experimental data of entire frequency ranges can be obtained through the test once in short time. The results of three points' measurement method and cross-correlation method to estimate the speeds of sound in a hose, tuner, and side branch respectively reveal that cross-correlation method can be used practically. The results of simulation and experiment were so close, especially in the range of engine idling speed, that the proposed analytical model in this study was validated. Sensitivity analyses and experiments show that longer tuner is preferable, and that the positive-positive composition of the steering hoses containing tuner is superior to others to attenuate ripple pressure.

• 한국항공우주학회지
• /
• 제34권9호
• /
• pp.1-10
• /
• 2006

본 연구에서는 낮은 비속도에서 작동하는 소형터보임펠러에서 베인의 형상을 최적화하여 출구에서 높은 양정을 얻기 위한 연구를 수행하였다. 임펠러의 설계점에서 비속도는 SI 단위로 4.0이며 임펠러의 외경은 56mm이다. 최적화를 수행할 때 임펠러의 외경을 고정하여 펌프의 부피를 제한하였으며 임펠러 내부의 설계변수를 변경하면서 목적함수인 양정을 극대화하였다. 설계변수는 베인의 형상설계와 관련이 있는 8개의 설계변수를 사용하였으며, 최적화를 위한 방법으로는 반응면법을 사용하였다. 내부유동장의 계산은 상용코드인 CFX-10을 사용였으며, 최적화된 임펠러에서 얻어진 양정은 초기설계변수에 의하여 설계되어진 임펠러에 비하여 9.7%이상 증가하였다. 이러한 증가는 내부 유로에서의 재순환영역의 감소와 직접적인 관련이 있었다.