• 대한기계학회논문집A
• /
• 제41권4호
• /
• pp.263-270
• /
• 2017

조선소에서 사용되는 대형 셧오프 밸브의 개폐를 위한 용기의 경우, 저압의 고정식 대형 공기탱크가 사용되고 있는데, 이는 먼 거리에 있는 밸브에 공압을 공급해야 할 경우, 추가 배관이 필요하며 수송도중 압력 강하가 발생하는 문제점이 있다. 이에 본 논문에서는 작업자들의 편의성을 증대시키고, 공기누설로 인한 폭발 방지를 위하여 고압의 휴대형 용접식 질소용기(11 kg, 10 L 및 50 bar)의 설계를 수행하였다. 구조적으로 취약한 용접부를 최소화하기 위하여 용기의 외형을 타원형으로 설계하였으며, 기준 무게 및 용적 충족과 사용압력에 대한 구조안전성을 확립하기 위하여 용기의 두께와 장단축 비를 설계하였다. 또한 용접 잔류응력 예측을 위해 APDL(ANSYS Parametric Design Language)을 이용하여 과도 열-구조 연성해석을 수행하였으며, 내압에 의한 구조안전 및 피로수명을 검증하였다.

• Journal of Chest Surgery
• /
• 제42권4호
• /
• pp.497-501
• /
• 2009

배경: 비디오흉강경하 폐 쐐기절제수술 후 흉관을 통한 지속적인 공기유출과 흉수배액은 퇴원할 준비가 되어있는 환자의 흉관 제거를 지연시킬 수 있다. 저자는 Heimlich valve가 부착된 Panda Pneumothorax set를 장착하여 외래에서 흉관 관리를 시행한 37명의 환자를 관찰하였다. 대상 및 방법: 2005년 1월부터 2007년까지 294명에서 비디오흉강경하 폐 쐐기절제술과 흉막유착술을 시행하였다. 이중 37명의 환자가 Panda Pneumothorax set with Heimlich valve를 이용한 외래에서의 흉관 관리를 위한 대상에 적합하였다. 환자들은 쓰여진 주의사항을 받았고 Panda set사용에 대한 믿음을 보여 주었다. 환자들은 공기누출과 흉수배액의 만족할만한 소실 후 흉관 제거를 위해서 병원에 복귀하였다. 결과: Panda Pneumothorax set를 착용하고 퇴원한 환자[평균 4.7$\pm$1.4일(3$\sim$6일)]는 착용하지 않았던 환자[평균 입원일은 6.2$\pm$5일(4$\sim$9일)]와 비교할 때 보다 장기간의 입원을 하였다. 그리고 또한 Panda Pneumothorax set환자의 경우 퇴원 후 외래에서 평균 9.8$\pm$1.6일(8$\sim$15일)만에 성공적으로 흉관을 제거할 수 있었다. 주요한 합병증은 없었으며 4명의 환자에서 사소한 합병증을 보였다. 36/37명(97.3%)에서 순탄하고 성공적인 외래에서의 흉관 관리를 경험하였다. 걸론: Panda set를 이용한 성공적인 외래에서의 흉관 관리를 선택된 36명의 환자에서 성실히 수행할 수 있었다. 이런 프로그램은 결과적으로 명백한 병원비 절약을 이룰 수 있었고 조기퇴원을 가능케 하여 환자의 만족감을 증가시켰다.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.216-222
• /
• 2016

Thus, this study aimed to develop a gear-type vane damper in order to replace the link-type vane damper. To achieve this goal, the torque generated in a gear-type vane damper was analyzed, and a structural analysis was conducted. In addition, the fluid flow was analyzed according to the changes in the vane's angle, and experimental tests such as a dry-heat test and cold test were conducted considering the operating conditions of the vessels. Moreover, an appropriate actuator was selected for the developed gear-type vane damper, and studies on the reduction in the backlash due to the facing-pressure adjustment length and flow rate and leakage test due to the vane's angle were conducted.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.30-34
• /
• 2009

Oil hydraulic piston pumps are being extensively used in the world, because of simple design, light weight and effective cost etc. An oil hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency according to large time use. In the oil hydraulic piston pumps the clearance between the valve block and piston plays an important role for volumetric and overall efficiency. In this paper, the wear property of the SACM645 material used the hydraulic piston pump has been work out by experimentation with variable heat treatment. To investigate the effect according to the piston surface condition, seven different types specimen were prepared. From the wear test results, induction hardening and nitration were definitely superior to the others. On the whole, nitration was estimated for high strength material to wear resistance.

• 상하수도학회지
• /
• 제29권4호
• /
• pp.519-531
• /
• 2015

It has been widely accepted that the pressure management of water distribution systems using pressure reducing valves(PRVs) would be an effective method for controlling leakages. A pressure reducing valve (PRV) regulates outlet pressure regardless of fluctuating flow and varying inlet pressure, thereby reducing leakage and mitigating the stress on the water distribution system. However, the operation of a PRV is vulnerable to its mechanical condition and hydraulic operability. In this research, the effect of PRVs installed in water distribution system are evaluated in terms of hydraulic pressure reduction and mechanical performance by analyzing measured pressure data with statistical approach. A statistical approach using the moving average filter and frequency analysis based on fourier transform is presented to detect abnormally operated PRVs that have been densely installed in water distribution system. The result shows that the proposed approach can be a good performance evaluation method by simply measuring pressures for the PRVs.

• Journal of Chest Surgery
• /
• 제21권6호
• /
• pp.979-983
• /
• 1988

Calcium channel blockers may prevent myocardial injury during cardioplegia and reperfusion. This study was done to evaluate the effects of diltiazem cardioplegia on myocardial protection during ischemic arrest and recovery of myocardial function after reperfusion. Four formulations of crystalloid cardioplegic solutions, GIK solution[group I, n=12], diltiazem[lug/ml GIK] in GIK solution[group II, n=7], ],diltiazem[2ug/ml GIK] in GIK solution[group III, n=6] and diltiazem[4ug/ml GIK] in GIK solution[group IV, n=6] were compared in isolated working rat heart subjected to a long period [2 hours] of hypothermic arrest with multi-dose infusion. Diltiazem cardioplegia[group II, III and IV]was found to be superior in nearly all aspects. Diltiazem cardioplegia showed faster recovery of regular rhythm and lower incidence of ventricular fibrillation than group I did. In comparing mechanical function in all experimental hearts, the mean postischemic recoveries of aortic flow, cardiac output, peak aortic pressure, stroke volume and stroke work[expressed as a percentage of its preischemic control] were significantly greater in group II, III and IV[diltiazem cardioplegia] than in group I. The infused amount of cardioplegic solution was more increased by the addition of diltiazem to GI K solution. [p < 0.01] Creatine kinase leakage tended to be lower in hearts receiving diltiazem cardioplegia, especially in group III and IV[p<0.05] than in those receiving GIK solution only[group I]. Diltiazem cardioplegia results in the increased flow of cardioplegic solution and the decreased ischemic injury of myocardium during ischemic arrest and the improved recovery of myocardial function after reperfusion, and a dose-response relation must be established before clinical use.

• Journal of Chest Surgery
• /
• 제11권3호
• /
• pp.342-347
• /
• 1978

A 8 year old male was admitted to the Department of Thoracic Surgery, Korea University Hospital on June 22, 1978. The chief complaints were cyanosis and exertional dyspnea since at birth. EKG shows BVH and dextrocardia, phonocardiogram revealed the accentuation of second heart sound in aortic area. Echocardiogram from the left ventricle to the base of the heart, there is a discontinuity between the ventricular septum and the anterior aortic margin with a large aortic root & aortic overriding. His cardiac catheterization data and cardiac angiogram shows situs inversus totalis, dextrocardia, right aortic arch, large ventricular septal defect etc., and finally diagnosed Truncus Arteriosus. Edwards type IV with retrograde aortogram and selective bronchial angiogram. This is the first operative case reported as Rastelli operation for Truncus Arteriosus type IV in the literatures in Korea. Authors have experienced I case of Truncus Arteriosus, Edward type IV and Rastelli operation with Dacron Arterial Conduit Graft under cardiopulmonary bypass on July 3, 1978. The procedures were as follows; 2] Cardiopulmonary bypass: Origin of bronchial arteries excised from descending aorta bilaterally; defects in aorta closed. 2] Horizontal incision made high in right ventricle. 2] Ventricular septal defect [Kirklin type I+II] closed with Teflon patch. 4] Bifurcated dacron arterial graft with pericardial monocusp sutured to the bilateral pulmonary arteries. [Diameter 9 mm: Length 7 cm]. 5] Proximal end of the conduit graft anastomosed to right ventricle. [Diameter 19 mm: Length 5 cm]..Total perfusion time was 220 min. The result of operation was poor due to anastomotic leakage and increased pulmonary vascular resistance resulting acute right heart failure. The patient was died on the operation table. Literatures were briefly reviewed.

• 한국전자통신학회논문지
• /
• 제6권4호
• /
• pp.589-594
• /
• 2011

스마트 폰 또는 홈 네트워크 기술은 지속적으로 부가가치를 창출할 수 있는 기술로, 삶의 질을 한층 더 높게 만들어 준다. 본 논문에서는 스마트 폰을 통해 스마트 홈을 제어 하는 시스템을 설계 및 구현하였다. 구현된 스마트 홈 시스템은 홈 노드 구조물, 원격 스마트 응용 시스템, 홈 서버 제어 시스템으로 구성된다. 홈 노드 구조물은 침입 감지, 가스 검출 및 밸브 제어, 도어 락, 자동커튼, 환풍기 제어 및 On/Off 제어 모듈로 구성되어 있으며 모듈들은 홈 서버에 의해서 제어 된다. 홈 서버는 사용자가 직접 제어할 수 있는 사용자 인터페이스와 스마트 폰을 이용하여 원격 제어할 수 있는 원격 인터페이스를 제공함으로써 언제 어디서나 편리하게 홈 자동제어시스템을 제어할 수 있다.

• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.280-289
• /
• 2008

This paper presents design of the quantitative feedback control system of the three axes hydraulic road simulator with respect to the dummy wheel for uncertain multiple input-output(MIMO) feedback systems. This simulator has the uncertain parameters such as fluid compressibility, fluid leakage, electrical servo components and nonlinear mechanical connections. This works have reproduced the random input signal to implement the real road vibration's data in the lab. The replaced $m^2$ MISO equivalent control systems satisfied the design specifications of the original $m^*m$ MIMO control system and developed the mathematical method using quantitative feedback theory based on schauder's fixed point theorem. This control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) having the minimum bandwidth for parameters of uncertain plant. The efficacy of the designed controller is verified through the dynamic simulation with combined hydraulic model and Adams simulator model. The Matlab simulation results to connect with Adams simulator model show that the proposed control technique works well under uncertain hydraulic plant system. The designed control system has satisfied robust performance with stability bounds, tracking bounds and disturbance. The Hydraulic road simulator consists of the specimen, hydraulic pump, servo valve, hydraulic actuator and its control equipments

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.67-70
• /
• 2009

고농도 과산화수소를 이용한 연구가 활발해짐에 따라 과산화수소의 국내 생산을 위한 증류 방법에 대한 연구가 요구된다. 증류 방법에는 증류할 물질의 공급방식과 증류 회수, 증류 압력 등의 증류 조건에 따라 여러 가지 방법이 존재하며 과산화수소 증류에는 진공증류법이 사용된다. 진공 증류는 과산화수소의 열분해와 공기 중 입자와의 반응을 줄일 수 있다. 증류 조건은 Raoult's law를 이용하여 결정하였다. 실험 장치의 낮은 진공도와 진공도의 조절이 중요한 문제로 나타났으나 진공 챔버의 교체로 진공의 누설을 막아 진공도를 높였으며, 실험 장치에 정량밸브를 설치하여 진공도를 조절하였다.