• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2498-2508
• /
• 1993

$Al/SiC/Al_{2}O_{3}$ hybrid composites are fabricated by squeeze infiltration method. From the misconstructive of $Al/SiC/Al_{2}O_{3}$ hybrid composites fabricated by squeeze infiltration method, uniform distribution of reinforcements and good bondings are found. Hardness value of $Al/SiC/Al_{2}O_{3}$ hybrid composites increases linearly with the volume fraction of reinforcement because SiC whisker and $Al_{2}$O$_{3}$ fiber have an outstanding hardness. Optimal aging conditions are obtained by examining the hardness of $Al/SiC/Al_{2}O_{3}$ hybrid composites with different aging time. Tensile properties such as Young's modulus and ultimate tensile strength are improved up to 30% and 40% by the addition of reinforcements, respectively. Failure mode of $Al/SiC/Al_{2}O_{3}$ hybrid composites is ductile on microstructural level. Through the abrasive wear test and wear surface analysis, wear behaviour and mechanism of 6061 aluminum and $Al/SiC/Al_{2}O_{3}$ hybrid composites are characterized under various testing conditions. The addition of SiC whisker to $Al/SiC/Al_{2}O_{3}$ composites gives rise to improvement of the wear resistance. The wear resistance of $Al/SiC/Al_{2}O_{3}$ hybrid composites is superior to that of Al/SiC composites. The wear mechanism of aluminum alloy is mainly abrasive wear at low speed range and adhesive and melt wear at high speed range. In contrast, that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is abrasive wear at all speed range, but severe wear when counter material is stainless steel. As the testing temperature increases, wear loss of aluminum alloy decreases because the matrix is getting more ductile, but that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is hardly varied. Oil lubricant is more effective to reduce the wear loss of aluminum alloy and $Al/SiC/Al_{2}O_{3}$ hybrid composites at high speed range.

• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.32-44
• /
• 2002

The role of radiology department has been greatly increased in the past few years as the technology in the medical imaging devices improved and the introduction of PACS (Picture Archiving and Communications System) to the conventional film-based diagnostic structure is a truly remarkable factor to the medical history. In addition, the value of using digital information in medical imaging is highly expected to grow as the technology over the computer and the network improves. However, the current medical practice, using PACS is somewhat limited compared to the film-based conventional one due to a poor image quality. The image quality is the most important and inevitable factor in the PACS environment and it is one of the most necessary steps to more wide practice of digital imaging. The existing image quality control tools are limited in controlling images produced from the medical modalities, because they cannot display the real image changing status. Thus, the image quality is distorted and the ability to diagnosis becomes hindered compared to the one of the film-based practice. In addition, the workflow of the radiologist greatly increases; as every doctor has to perform his or her own image quality control every time they view images produced from the medical modalities. To resolve these kinds of problems and enhance current medical practice under the PACS environment, we have developed a program to display a better image quality by using the ROI optical density of the existing gray level values. When the LUT is used properly, small detailed regions, which cannot be seen by using the existing image quality controls are easily displayed and thus, greatly improves digital medical practice. The purpose of this study is to provide an easier medical practice to physicians, by applying the technology of converting the H-D curves of the analog film screen to the digital imaging technology and to preset image quality control values to each exposed body part, modality and group of physicians for a better and easier medical practice. We have asked to 5 well known professional physicians to compare image quality of the same set of exam by using the two different methods: existing image quality control and the LUT technology. As the result, the LUT technology was enormously favored over the existing image quality control method. All the physicians have pointed out the far more superiority of the LUT over the existing image quality control method and highly praised its ability to display small detailed regions, which cannot be displayed by existing image quality control tools. Two physicians expressed the necessity of presetting the LUT values for each exposed body part. Overall, the LUT technology yielded a great interest among the physicians and highly praised for its ability to overcome currently embedded problems of PACS. We strongly believe that the LUT technology can enhance the current medical practice and open a new beginning in the future medical imaging.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.565-574
• /
• 2005

It is used water quality data that was measured at Pyeongchanggang real time monitoring stations in Namhan river. These characteristics were analyzed with the water qualify of rainy and nonrainy periods. TOC (Total Organic Carbon) data of rainy periods has correlation with discharge and shows high values of mean, maximum, and standard deviation. DO (Dissolved Oxygen) value of rainy periods is lower than those of nonrainy periods. Input data of the water quality forecasting models that they were constructed by neural network and neuro-fuzzy was chosen as the reasonable data, and water qualify forecasting models were applied. LMNN, MDNN, and ANFIS models have achieved the highest overall accuracy of TOC data. LMNN (Levenberg-Marquardt Neural Network) and MDNN (MoDular Neural Network) model which are applied for DO forecasting shows better results than ANFIS (Adaptive Neuro-Fuzzy Inference System). MDNN model shows the lowest estimation error when using daily time, which is qualitative data trained with quantitative data. The observation of discharge and water quality are effective at same point as well as same time for real time management. But there are some of real time water quality monitoring stations far from the T/M water stage. Pyeongchanggang station is one of them. So discharge on Pyeongchanggang station was calculated by developed runoff neural network model, and the water quality forecasting model is linked to the runoff forecasting model. That linked model shows the improvement of waterquality forecasting.

• The KIPS Transactions:PartA
• /
• v.13A no.7 s.104
• /
• pp.615-622
• /
• 2006

Caching in a Wireless Internet Proxy Server Cluster Environment has an effect that minimizes the time on the request and response of Internet traffic and Web user As a way to increase the hit ratio of cache, we can use a hash function to make the same request URLs to be assigned to the same cache server. The disadvantage of the hashing scheme is that client requests cannot be well-distributed to all cache servers so that the performance of the whole system can depend on only a few busy servers. In this paper, we propose an improved load balancing scheme using hashing and Round Robin scheme that distributes client requests evenly to cache servers. In the existing hashing scheme, if a hashing value for a request URL is calculated, the server number is statically fixed at compile time while in the proposed scheme it is dynamically fixed at run time using round robin method. We implemented the proposed scheme in a Wireless Internet Proxy Server Cluster Environment and performed experiments using 16 PCs. Experimental results show the even distribution of client requests and the 52% to 112% performance improvement compared to the existing hashing method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03a
• /
• pp.16-16
• /
• 2010

GaN-based light-emitting diodes (LEDs) are attracting great interest as candidates for next-generation solid-state lighting, because of their long lifetime, small size, high efficacy, and low energy consumption. However, for general illumination applications, the external quantum efficiency of LEDs, determined by the internal quantum efficiency (IQE) and the light extraction efficiency, must be further increased. The IQE is determined by crystal quality and epitaxial layer structure and high value of IQE more than 70% for blue LEDs have been already reported. However, there is much room for improvement of light extraction efficiency because most of the generated photons from active layer remain inside LEDs by total internal reflection at the interface of semiconductor with air due to the high refractive index difference between LEDs epilayer (for GaN, n=2.5) and air (n=1). The light confining in LEDs will be reabsorbed by the metal electrode or active layer, reducing the efficacy of LEDs. Here, we present the first demonstration of enhanced light extraction by forming a MgO nano-pyramids structure on the surface of vertical-LEDs. The MgO nano-pyramids structure was successfully fabricated at room temperature using conventional electron-beam evaporation without any additional process. The nano-sized pyramids of MgO are formed on the surface during growth due to anisotropic characteristics between (111) and (200) plane of MgO. The ZnO layer with quarter-wavelength in thickness is inserted between GaN and MgO layers to increase the critical angle for total internal reflection, because the refractive index of ZnO (n=1.94) could be matched between GaN (n=2.5) and MgO (n=1.73). The MgO nano-pyramids structure and ZnO refractive-index modulation layer enhanced the light extraction efficiency ofV-LEDs with by 49%, comparing with the V-LEDs with a flat n-GaN surface. The angular-dependent emission intensity shows the enhanced light extraction through the side walls of V-LEDs as well as through the top surface of the n-GaN, because of the increase in critical angle for total internal reflection as well as light scattering at the MgO nano-pyramids surface.

• Atmosphere
• /
• v.16 no.2
• /
• pp.97-110
• /
• 2006

This study investigates the response of a typhoon model to the change of the sea surface temperature (SST) throughout the model integration. The SST change is parameterized as a formulae of which the magnitude is given as a function of not only the intensity and the size but the moving speed of tropical cyclone. The formulae is constructed by referring to many previous observational and numerical studies on the SST cooling with the passage of tropical cyclones. Since the parameterized cooling formulae is based on the mathematical expression, the resemblance between the prescribed SST cooling and the observed one during the period of the numerical experiment is not complete nor satisfactory. The agreements between the prescribed and the observed SST even over the swath of the typhoon passage differ from case to case. Numerical experiments are undertaken with and without prescribing the SST cooling. The results with the SST cooling do not show clear evidence in improving the track prediction compared to those of the without-experiments. SST cooling in the model shows its swath along the incomplete simulated track so that the magnitude and the distribution of the sea surface cooling does not resemble completely with the observed one. However, we have observed a little improvement in the intensity prediction in terms of the central pressure of the tropical cyclone in some cases. In case where the model without the SST treatment is not able to yield a correct prediction of the filling of the tropical cyclone especially in the decaying stage, the pulling effect given by the SST cooling alleviates the over-deepening of the model so that the central pressure approaches toward the observed value. However, the opposite case when the SST treatment makes the prediction worse may also be possible. In general when the sea surface temperature is reduced, the amount of the sensible and the latent heat from the ocean surface become also reduced, which results in the weakening of the storms comparing to the constant SST case. It turns out to be the case also in our experiments. The weakening is realized in the central pressure, maximum wind, horizontal temperature gradient, etc.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.393-397
• /
• 1995

With a view to utilizing fish skin gelatin as a clearifier or chewing gum base, yellowfin sole skin gelatin was succinylated. Up to 10% succinic anhydride to gelatin, the succinylation degree of gelatin was increased linear and above this concentration a nearly constant value was reached. The succinylated gelatin treated with 15% succinic anhydride to gelatin was examined on the reactivity properties with tannic acid in the experiment. Succinylation degree of the gelatin was about 80%. Succinylation shifted the apparent isoelectric point from pH 5.54 in untreated gelatin to pH 4.08 in succinylated gelatin. The proximate composition and amino acid composition of succinylated gelatin were similar to those of untreated gelatin. However Lysine composition for succinylated gelatin was lower than for untreated gelatin. The ratio of precipitated gelatin and tannic acid became maximum at pH 4.8 in untreated gelatin, at pH 4.0 in succinylated gelatin. Regardless of the difference between untreated and succinylated gelatins, the ratio of precipitated gelatin decreased with concentration of gelatin. The ratio of precipitated tannic acid was the highest by adding $2{\sim}4$ times in succinylated gelatin to tannic acid weight, by adding $2{\sim}3$ times in untreated gelatin. The ratios of precipitated succinylated gelatin and tannic acid were scarcely affected by the presence of sucrose, however, were affected by the presence of ethyl alcohol.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.35-46
• /
• 2015

Improvement in domestic poultry production has a positive effect on the export competitiveness of the poultry industry. However, overproduction and enlargement of facilities to assure a supply increase a stocking density which make a poor environment in the broiler house. In particular, an intensive rearing environment is vulnerable to dust control that causes respiratory diseases, such as asthma, bronchitis, etc., to farmers and broilers. However, monitoring data and research for environment control are not adequate, and there are no air quality regulations in broiler houses in Korea. In this study, TSP, PM10, inhalable dust and respirable dust concentration were monitored according to season, age of broiler and broiler's activities. Air quality assessment was also performed in accordance with the threshold limit value by Donham et al. (2000). The TSP concentrations were 77.5 %, 219.7 % higher and PM10 concentrations were 121.2 %, 303.8 % higher when change of season and winter respectively than summer. There were significantly different concentrations according to season and age of broiler. Inhalable and respirable dust concentration were also clearly different according to the season and age of broiler. A high dust concentration was observed, specifically exceeding the threshold limit by 119 % in the winter. In the case of the broiler's motion was activity according to worker's access into the broiler house, concentration level was 769.6 % higher than broiler's motion was stable and exceeded the threshold limit. These results suggest that the worker should put on protective equipment to protect there's respiratory health in the broiler house.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.901-908
• /
• 2009

We examine the processing method of the food wastewater to direct spray at living waste incinerator. The demoscale stoker system is used as a incineration facility. The results show that it brings effect on the reduction of nitrogen oxide ($NO_x$) concentration as well as the ammonia ($NH_3$) amount in SNCR (selective non-catalytic reduction) by the incineration of food wastewater which is containing a plentiful ammoniac nitrogen ($NH_3$-N). Furthermore, the stability of incineration facility and the extension of operation period is actualized as a improvement of clogging phenomenon on outer wall of water pipe as the 870~$950^{\circ}C$ maintain of exit temperature in a second combustor by spray of the food wastewater. The 26 items of air pollution matter of nitrogen oxide ($NO_x$), sulfur oxide ($SO_x$) and dioxin etc. are measured. The results show that it is under the value of allowable exhaust standard.

• Journal of Distribution Science
• /
• v.16 no.8
• /
• pp.63-68
• /
• 2018

Purpose - Lettuce (Lactuca sativ L.) is one of the economically important vegetable crops, which worldwide market value is over 100 billion U.S. dollar. In Korea, about 89.7 kilo ton of lettuce was produced in 3400ha in 2016, recoded as No. 1 vegetable crop in domestic green house production. However, recently, domestic lettuce production and cultivation areas are all getting decreased. Thus, novel approaches are needed to be implemented to revive the production. Research design, data and methodology - In this review paper, we first prioritized the end-user traits which are imperative to positively stimulate the domestic lettuce market and discussed relevant genomics strategies. Especially, we assessed a possibility whether school meal program would be a potential niche market. Results - The genomics technologies, which become widely applied in the crop biotechnology since 2008 when next generation sequencing method was developed, may be a good solution in the crop improvement, efficiently gathering valuable information of agriculturally useful traits. Significantly, in lettuce, the high quality whole genome sequence, based on Lactuca sativa cv. Salinas, is publically available and this genomics platform, thus, would be implemented in lettuce breeding program to innovate relevant end-user traits both for the farmers and customers, including the disease resistance to the Fusarium wilt, productivity under hot weather conditions, various nutritional qualities and so forth. These improvements will boost domestic lettuce industries in the near future. Conclusions - Due to the nutritional distinctions comparing to the western style lettuces, domestic leaf lettuces could be one of the important vegetables in the school meal programs. To make it happen, we would better devise diverse recipes to make a salad with it, instead of only using as a wrap vegetable. Meanwhile, novel lettuce varieties need to be developed, which are favorable to the students and also easy to be handled with while processing. Overall, to achieve international competence in the lettuce industries, we need to create elite lettuce varieties that satisfies domestic farmers as well as customers, suitable to various niche markets, such as school meal program. Thus, efficient breeding programs using genomics approaches should be established in advance and careful monitoring on the preference of the related customers for a niche market be continued persistently.