• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.11
• /
• pp.1537-1544
• /
• 2015

Meat and carcass quality attributes are of crucial importance influencing consumer preference and profitability in the pork industry. A set of 400 Berkshire pigs were collected from Dasan breeding farm, Namwon, Chonbuk province, Korea that were born between 2012 and 2013. To perform genome wide association studies (GWAS), eleven meat and carcass quality traits were considered, including carcass weight, backfat thickness, pH value after 24 hours (pH24), Commission Internationale de l'Eclairage lightness in meat color (CIE L), redness in meat color (CIE a), yellowness in meat color (CIE b), filtering, drip loss, heat loss, shear force and marbling score. All of the 400 animals were genotyped with the Porcine 62K SNP BeadChips (Illumina Inc., USA). A SAS general linear model procedure (SAS version 9.2) was used to pre-adjust the animal phenotypes before GWAS with sire and sex effects as fixed effects and slaughter age as a covariate. After fitting the fixed and covariate factors in the model, the residuals of the phenotype regressed on additive effects of each single nucleotide polymorphism (SNP) under a linear regression model (PLINK version 1.07). The significant SNPs after permutation testing at a chromosome-wise level were subjected to stepwise regression analysis to determine the best set of SNP markers. A total of 55 significant (p<0.05) SNPs or quantitative trait loci (QTL) were detected on various chromosomes. The QTLs explained from 5.06% to 8.28% of the total phenotypic variation of the traits. Some QTLs with pleiotropic effect were also identified. A pair of significant QTL for pH24 was also found to affect both CIE L and drip loss percentage. The significant QTL after characterization of the functional candidate genes on the QTL or around the QTL region may be effectively and efficiently used in marker assisted selection to achieve enhanced genetic improvement of the trait considered.

• Cartoon and Animation Studies
• /
• s.21
• /
• pp.33-49
• /
• 2010

Since the Web 2.0 generation, the average user is more than just enjoying the various media contents; they start to create contents, and those contents have had a huge value and great influence in recent days. The reason for the increase of users who tend to create contents is due to popularization of web based applications. Previous applications were only for the skilled person; however, new web based applications involve the average person and give him a new level of user enjoyment by allowing him to create easily with simple operations. In this paper, through analysing previous animation-creating applications which could not spread widely compared to other contents, we suggest the outline for developing a web based animation-creating application which can help the user to easily create animation contents. We have looked around at how various other contents-making applications have been changed to help the user to be able to participate in creating contents, and we suggest how animation-creating applications can be changed and developed from this analysis. We expect the conclusion of this paper to stimulate to development acting 3D animation-creating applications corresponding to the web 2.0 features - open, share, cooperate, participate. In result, users can enjoy creating the animation more actively; at the same time, we hope to help the development of the new applications which correlate to memedia generation.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.195-201
• /
• 2017

In this study, H13 tool steel sculptures are built by a metal 3D printing process at various laser scan speeds. The properties of commercial H13 tool steel powders are confirmed for the metal 3D printing process used: powder bed fusion (PBF), which is a selective laser melting (SLM) process. Commercial H13 powder has an excellent flowability of 16.68 s/50 g with a Hausner ratio of 1.25 and a density of $7.68g/cm^3$. The sculptures are built with dimensions of $10{\times}10{\times}10mm^3$ in size using commercial H13 tool steel powder. The density measured by the Archimedes method is $7.64g/cm^3$, similar to the powder density of $7.68g/cm^3$. The hardness is measured by Rockwell hardness equipment 5 times to obtain a mean value of 54.28 HRC. The optimum process conditions in order to build the sculptures are a laser power of 90 W, a layer thickness of $25{\mu}m$, an overlap of 30%, and a laser scan speed of 200 mm/s.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.3
• /
• pp.31-43
• /
• 2018

Purpose - With the technology of the 4th industrial revolution, business models of agricultural sector are changing rapidly toward convergence and high value-added business models due to the 6th industrialization of agricultural. Our goals is to examine the 6th industrialization of agriculture, and then to apply the technology of the 4th industrial revolution to the 6th industrialization of agriculture, suggesting the possibility of future agriculture, and then linking the export competitiveness of agricultural products. Research design, data, and methodology - As the methodology, case studies and empirical analyzes were conducted as well as literature studies. The case analyses included tomatoes, pig breeding farms, and an empirical analysis was conducted using the AHP analysis by experts of the 6th industrialization. In addition, using 124 survey data, this study examined and analyzed the items of the 4th industrial revolution technology for the 6th industrialization of agriculture and the strengthening of export competitiveness. Results - Results showed that the technology of the 4th Industrial Revolution helped "6th industrialization of agriculture" and "the strengthening of export competitiveness" using two successful cases. The AHP analysis was also carried out, and it was found that the improvement of the technology in the 4th industrial revolution could contribute to the future industrialization as well as the 6th industrialization of agriculture. First of all, we looked many conditions were important and urgent. Among the technologies of the 4th industrial revolution, the mobile, big data were important. Moreover, it was recognized that linkage and convergence related efforts would greatly contribute to strengthening export competitiveness of agriculture such as price and quality competitiveness. Conclusions - The 4th industrial revolution such as hyper-connectivity, hyper-intelligence and hyper-predictability contribute greatly to the 6th industrialization of agriculture, and therefore it is essential to improve the competitiveness of the agricultural sector by using the technology of the 4th industrial revolution. In particular, based on analyses of the diamond model, the "demand conditions" was the most important factor for the activation of the 6th Industrialization, and then "related and supporting fields", "factor conditions" and "business context" were followed in order. The results of this study can be useful for policy, practical and academic sectors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.672-680
• /
• 2018

The opening angle of the duct cap assembly during the operation of a refrigerator ice dispenser was evaluated by transient structural analysis, and an improved design to maximize the opening angle was obtained. The opening angle of the existing design was found to be 78% of the upper limit. Several design modifications were proposed and analyzed to examine the effects of the design factors on the opening angle. As a result of the design modifications, the opening angle was improved by changing the lever material to a material with a high elastic modulus, moving the position of the support to the motor side, or increasing the lever shaft diameter. Considering the manufacturing cost of the new design, the design modification changing only the lever material was found to be the best because it does not require a change in the structure of the ice dispenser case. In conclusion, the opening angle can be improved by up to 95% of the upper limit value if the lever material is changed to an aluminum alloy. The methods and results presented in this study were found to be of great help in designing the duct cap assembly structure to facilitate the discharge of ice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.697-704
• /
• 2017

This study was carried out to investigate and alleviate the vibration problem of commercial high-speed trains. First, the measurement of the carbody vibration was performed, in order to determine the vibration level of the high-speed train. The measurement result showed that the vibration level of the driver cab was higher than that of the passenger car and that the vibration became bigger toward the trailing end of the train. The vertical vibration of the driver cab and passenger car was larger than the transverse vibration, and the maximum value of the vibration in the ballast section was larger than that in the concrete section. A dynamic analysis was carried out to improve the vibration of the KTX-Sancheon train. The results of the analysis showed that it is necessary to reduce the vibration of the driver cab and both ends of the passenger cars. To reduce the vibration of the driver cab, it was recommended that the stiffness of the secondary coil spring be reduced and the damping coefficient of the secondary vertical damper be increased. It was found that the failure of the suspension system could be the origin of the vibration problem of the high-speed train. The proper management of wheel wear plays an important role in the improvement of the operation efficiency and reduction of the carbody vibration of high-speed trains, and research is underway to change the present wheel profile to increase the mileage between wheel turning.

• Journal of Korean Library and Information Science Society
• /
• v.38 no.2
• /
• pp.13-30
• /
• 2007

The purpose of this study was to explore the role orientation that librarians are expected to carry during their career-life. More specifically, this study examined the pattern of librarians subjectivism related to attitude, belief, and confidence. Q questions were made of 36 items, including personal value system and role attitude. P sample included 23 librarians. Data were collected for 8 days (from April 15, 2005 to April 22, 2005). Analyses showed the following results. First, librarians role orientations were classified into 3 types: user-centered orientation, organization-centered orientation, and expertise-centered orientation. (1) The first type librarians were interested in having good relationships with users, while emphasizing the importance of providing good services to the users. (2) The second type of librarians were concerned with social function of the library, while placing highlight on their roles as organizational members. Among them, achievement evaluation was regarded as an important indicator of personal success. They were interested in having stable organizational culture, as well as economic growth of libraries. This orientation was dominant among married members. (3) The third type of librarians focused on librarians role implementation and professional achievement. They showed interest not only in the improvement of librarians creativity and the growth of expertises, but also the expansion of retraining opportunities. This orientation was conspicuous among female librarians. Second, several commonalities and differences were consistently found among librarians. The first type was interested in user-centered orientation(user contact, need satisfaction, self dignity, etc.). The second type was interested in organization-centered orientation(creativity, expertise growth, retraining opportunity, professional achievement. self-respect, etc.).

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.4
• /
• pp.274-282
• /
• 2009

Various location tracking sensors; such as GPS, INS, radar, and optical equipment; are used for tracking moving targets. In order to effectively track moving targets, it is necessary to develop an effective fusion method for these heterogeneous devices. There have been studies in which the estimated values of each sensors were regarded as different models and fused together, considering the different error characteristics of the sensors for the improvement of tracking performance using heterogeneous multi-sensor. However, the rate of errors for the estimated values of other sensors has increased, in that there has been a sharp increase in sensor errors and the attempts to change the estimated sensor values for the Sensor Probability could not be applied in real time. In this study, the Sensor Probability is obtained by comparing the RMSE (Root Mean Square Error) for the difference between the updated and measured values of the Kalman filter for each sensor. The process of substituting the new combined values for the Kalman filter input values for each sensor is excluded. There are improvements in both the real-time application of estimated sensor values, and the tracking performance for the areas in which the sensor performance has rapidly decreased. The proposed algorithm adds the error characteristic of each sensor as a conditional probability value, and ensures greater accuracy by performing the track fusion with the sensors with the most reliable performance. The trajectory of a UAV is generated in an experiment and a performance analysis is conducted with other fusion algorithms.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.121-128
• /
• 2020

The Marine Safety Culture Index (MSCI) was developed in the year 2018 for objectively assessing the public safety culture levels and for incorporating it as data to spread knowledge regarding the marine safety culture. The method for calculating the safety culture index should include issues that may affect the safety culture and should consist of appropriate attributes for estimating the current status. In addition, continuous verification and supplementation are required for addressing social and economic changes. In this study, to determine whether the questionnaire designed by marine experts reflects the people's interests and needs, we analyzed 915 marine safety proposals. Text mining was employed for analyzing the unstructured data of the marine safety proposals, and network analysis and topic modeling were subsequently performed. Analysis of the marine safety proposals was centered on attributes such as education, public relations, safety rules, awareness, skilled workers, and systems. Eighteen questions were modified and supplemented for reflecting the marine safety proposals, and reliability of the revised questions was analyzed. Furthermore, compared to the previous year, the questionnaire's internal consistency was improved upon and was rated at a high value of 0.895. It is expected that by employing the derived marine safety culture index and incorporating the improved questionnaire that reflects the requirements of marine experts and the people, the improved questionnaire will contribute to the establishment of policies for spreading knowledge regarding the marine safety culture.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.3
• /
• pp.1149-1154
• /
• 2014

Background: In Malaysia, data from the Malaysian Health Ministry showed colorectal cancer (CRC) to be the second most common type of cancer in 2007-2009, after breast cancer. The same was apparent after looking at males and females cases separately. In the present study, the Geographic Information System (GIS) was employed to describe the distribution of CRC cases in Kuala Lumpur (KL), Malaysia, according to socio-demographic factors (age, gender, ethnicity and district). Materials and Methods: This retrospective review concerned data for patients diagnosed with colorectal cancer in the years 1995 to 2011 collected from the Wilayah Persekutuan Health Office, taken from the cancer notification form (NCR-2), and patient medical records from the Surgical Department, Universiti Kebangsaan Malaysia Medical Centre (UKMMC). A total of 146 cases were analyzed. All the data collected were analysed using ArcGIS version 10.0 and SPSS version 19.0. Results: Patients aged 60 to 69 years accounted for the highest proportion of cases (34.2%) and males slightly predominated 76 (52.1%), Chinese had the highest number of registered cases at 108 (74.0%) and staging revealed most cases in the 3rd and 4th stages. Kernel density analysis showed more cases are concentrated up in the northern area of Petaling and Kuala Lumpur subdistricts. Spatial global pattern analysis by average nearest neighbour resulted in nearest neighbour ratio of 0.75, with Z-score of -5.59, p value of <0.01 and the z-score of -5.59. Spatial autocorrelation (Moran's I) showed clustering significant with p<0.01, Z score 3.14 and Moran's Index of 0.007. When mapping clusters with hotspot analysis (Getis-Ord Gi), hot and cold spots were identified. Hot spot areas fell on the northeast side of KL. Conclusions: This study demonstrated significant spatial patterns of cancer incidence in KL. Knowledge about these spatial patterns can provide useful information to policymakers in the planning of screening of CRC in the targeted population and improvement of healthcare facilities to provide better treatment for CRC patients.