• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.911-916
• /
• 2014

The leisure boat industry has the potential to become a high-value-added industry in the future. Recently, a study on Korean high-speed leisure boats for fishing was conducted. This study suggests a product configuration model-based shipbuilding cost estimation method for determining the type of leisure boat suitable for mass production, as part of a research for productivity improvement. The suggested estimation method based on the analysis of the leisure boat process and generic YWBS can calculate quantitative and concrete data. By using this method, the cost of building the catamaran-type design ship can be reduced by 17 times, compared to that of the monohull-type mother ship. This implies that the final design of the Korean high-speed leisure boat for fishing will have a competitive price at the actual production stage.

• Wind and Structures
• /
• v.29 no.6
• /
• pp.457-469
• /
• 2019

In this paper, a numerical solution is presented for supersonic flutter analysis of cantilever non-symmetric functionally graded (FG) sandwich plates. The plate is considered to be composed of two different functionally graded face sheets and an isotropic homogeneous core made of ceramic. Based on the first order shear deformation theory (FSDT) and linear piston theory, the set of governing equations and boundary conditions are derived. Dimensionless form of the governing equations and boundary conditions are derived and solved numerically using generalized differential quadrature method (GDQM) and critical velocity and flutter frequencies are calculated. For various values of the yaw angle, effect of different parameters like aspect ratio, thickness of the plate, power law indices and thickness of the core on the flutter boundaries are investigated. Numerical examples show that wings and tail fins with larger length and shorter width are more stable in supersonic flights. It is concluded for FG sandwich plates made of Al-Al₂O₃ that increase in volume fraction of ceramic (Al₂O₃) increases aeroelastic stability of the plate. Presented study confirms that improvement of aeroelastic behavior and weight of wings and tail fins of aircrafts are not consistent items. It is shown that value of the critical yaw angle depends on aspect ratio of the plate and other parameters including thickness and variation of properties have no considerable effect on it. Results of this paper can be used in design and analysis of wing and tail fin of supersonic airplanes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.6
• /
• pp.903-911
• /
• 2008

The effects of salt and bicarbonate solution on overall meat quality in beef biceps femoris muscle were investigated with the application of chilling and freezing conditions. Muscles were injected to a target of 120% of original meat weight with a solution containing 1.2 M sodium chloride, 0.25 M sodium bicarbonate and 0.1% ascorbic acid (pH 7.2). Half of the meat samples, considered as chill treatment and chill control, were stored at $4^{\circ}C$ up to five days; while the other half, frozen treatment and frozen control, were kept in a freezer at $-20^{\circ}C$ for seven days. Compared with untreated control, treated meats had higher water holding capacity (p<0.05), lower drip loss (p<0.05) and lower shear force (p<0.07) with higher overall acceptability (p<0.05) in sensory evaluation. Morphological observations demonstrated smooth and gummy meat surface due to the solubilization of myofibrillar proteins and the distortion of connective tissue in treated raw meats; and in the case of cooked meat, treatment caused the fragmentation of myofibrils, which might be responsible for a lower shear value in salt-bicarbonate treated beef biceps femoris muscle.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.10
• /
• pp.4303-4310
• /
• 2015

Rumex vesicarius is an edible herb distributed in Egypt and Saudi Arabia. The whole plant has significant value in folk medicine and it has been used to alleviate several diseases. Hepatocellular carcinoma (HCC), the major primary malignant tumor of the liver, is one of the most life-threatening human cancers. The goal of the current study was to explore the potent role of Rumex vesicarius extract against HCC induced in rats. Thirty adult male albino rats were divided into 3 groups: (I): Healthy animals received orally 0.9 % normal saline and served as negative control group, (II): HCC group in which rats were orally administered N-nitrosodiethylamine NDEA, (III): HCC group treated orally with R. vesicarius extract in a dose of 400 mg/kg b.wt daily for two months. ALT and AST, ALP and ${\gamma}$-GT activities were estimated. CEA, AFP, AFU, GPC-3, Gp-73 and VEGF levels were quantified. Histopathological examination of liver tissue sections was also carried out. The results of the current study showed that the treatment of the HCC group with R. vesicarius extract reversed the significant increase in liver enzymes activity, CEA, AFP, AFU, glypican 3, golgi 73 and VEGF levels in serum as compared to HCC-untreated counterparts. In addition, the favorable impact of R. vesicarius treatment was evidenced by the marked improvement in the histopathological features of the liver of the treated group. In conclusion, the present experimental setting provided evidence for the significance of R. vesicarius as anticancer candidate with a promising anticancer potential against HCC. The powerful hepatoprotective properties, the potent antiangiogenic activity and the effective antiproliferative capacity are responsible for the anticancer effect of this plant.

• Journal of Korea Foundry Society
• /
• v.38 no.5
• /
• pp.87-94
• /
• 2018

The effects of Sr and (Ti-B) additives on the tensile properties of AC4A recycled (35% scrap content) aluminum alloys were investigated. An acicular morphology of the eutectic Si phase of as-cast specimens was converted to a fibrous morphology upon the addition of Sr. Moreover, morphology of the Sr modified eutectic Si phase became finer due to a T6 heat treatment. The grain size of the ${\alpha}$-solid solution was decreased by the addition of (Ti-B) additives. Depending on the treatment conditions of the as-cast specimens, i.e., no addition, a Sr addition and a (Ti-B)+Sr addition, the tensile strength levels of the as-cast specimens were 182, 192, and 204MPa, respectively. The corresponding strengths of T6 heat-treated specimens were 293, 308, and 318MPa. Elongations of the as-cast specimens were 2.2, 3.1, and 5.6%, and the corresponding elongations of the T6 heat-treated specimens were 4.6, 6.1, and 7.6%. The percentage of the reduced section area in the tensile specimens was also increased by the Sr and (Ti-B) additives. Sr and (Ti-B) additives changed the microstructure and the distribution of defects in the castings, resulting in an improvement of the tensile properties of AC4A aluminum alloys. According to our test results, recycled (35% scrap content) AC4A aluminum alloy met all of the KS requirements of the tensile strength and elongation values of AC4A aluminum alloy except for the elongation value of the one specimen condition, in this case the as-cast no-addition condition.

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.47-58
• /
• 2003

The purpose of this study was to integrate the therapeutic effects of Oriental medicine for stroke in clinical research published in Korea from 1991 to 2000. In the preliminary study, clinical studies on Oriental medical therapy for stroke in Korea were collected. Since it was inadequate to integrate the results of the papers, qualitative meta-analysis was conducted on them. In age distribution of occurrence, the most frequent age was sixties followed by seventies, fifties, forties, and thirties. Sample size was minimum 42 persons, maximum 473 persons. Papers including single therapy were noted in 50.1 %. Among those, herbal medicine was noted in 30%, while acupuncture, physical treatment, and moxibustion was noted in 6.7%. Including more than two therapies were noted in 49.1 %, Among those, herbal medicine was noted in 80%, acupuncture in 20%, physical treatment in 13%, western and oriental medicine in 30%. Papers including control group were noted in 13% and description of scale for the evaluation of treatment effect was 80%. Papers including objectification of scales for the evaluation of therapeutic effects were noted in 26.7% and described follow-up period were noted in 13%. Papers including statistical analysis were noted in 26.7% and calculated p-value was noted in. 13.3%. Papers including design of longitudinal study were noted in 86.7%. Case-control studies were noted in 13.3%. Randomization and blinding were noted in each 0%. These results suggest that followings are required for the improvement of quality of clinical research in Oriental medicine; obvious description of treatment method, objectification of scales for the evaluation of therapeutic effects, adequate research design, randomization and blinding.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.66-73
• /
• 2007

The Jewelry-relation industry is being placed in the crises which are serious with depression of domestic market, design development and a major force absence also high labor cost charge. The consumers have the value of the price preparation maximum and product differentiation which they want. The Jewelry CAD and RP equipment shorten cost of production enterprise which depended hand-metal work provided for the various design and a rapid new product. But until now, it was necessary to the original work of best condition casting vacuum cycle as difficult with direct casting of synthetic resin from RP equipment. I intend to imply significance about through the CAD and RP equipment application result with it analyses, after jewelry CAD and RP work applicable to direct casting will be possible and able to through the casting vacuum cycle produce the product which is suitable in the original production. Through the this paper jewelry secures a quality improvement of the product and discrimination characteristic being various competitive power of design and provide a new base in product production.

• Korean Journal of Human Ecology
• /
• v.23 no.4
• /
• pp.665-680
• /
• 2014

The purpose of this study was to develop the construction process of orthopedic compression garments (OCG) for balancing of the left and right lumbar muscle power and strength to prevent low back pain. One male subject having low back pain was involved for investigating of the lumbar muscle power. EMG (Telemyo DTS2, Noraxon, U.S.A) was measured with/ without 3 types of waist assistant belt around the waist area of the subject. Based on the electromyogram value of left and right body, OCG were constructed as follows. Firstly, stretchable t-shirts type with supportive waist belt was selected for the convenience of wearing and laundering the OCG. The design lines of the front and back waist parts were created depending on the anatomy of the torso. Secondly, 3D pattern was developed using 3D Clo, RapidForm XOR, 2C-AN, and Yuka CAD program to increase the fit of the OCG. Finally, stretchable power-net was layered as linings in two ways, a single lining and double layered linings, and evaluated measuring lumbar muscle EMG by five subjects with low back pain. As the results, they were effective to balance the left and right lumbar muscle power and strength. Also the OCG with the double layered power-net lining was superior to the one layered lining in terms of fit and comfort.

• Journal of Korea Multimedia Society
• /
• v.15 no.9
• /
• pp.1086-1092
• /
• 2012

In this paper, we propose the rate control scheme reducing frame skipping at low bit-rate. As the method considering lossy parts in the compressing process at the existing scheme, the proposed scheme is improved by subtracting the converted bits from the target bit-rate of the current frame. The converted bits are the value resulted from multiplying the ratio of the current frame MAD to the previous frame MAD by the compressed bits changed from the remaining values after compressing the previous frame.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5607-5609
• /
• 2014

Introduction: Although continuing education is necessary for practicing nurses, it is very difficult to organize traditional classes because of large numbers of nurses and working shifts. Considering the increasing development of mobile electronic learning, we carried out a study to compare effects of the traditional face to face method with mobile learning delivered as text messages by cell phone. Materials and Methods: Sixty female nurses working in our hospital were randomly divided into class and short message service (SMS) groups. Lessons concerning breast cancer screening were prepared as 54 messages and sent in 17 days for the SMS group, while the class group participated in a class held by a university lecturer of breast and cancer surgery. Pre- and post-tests were undertaken for both groups at the same time; a retention test also was performed one month later. For statistical analysis, the paired T test and the independent sample T test were used with SPSS software version 16; p<0.05 was considered significant. Results: Mean age and mean work experience of participants in class and SMS groups was $35.8{\pm}7.2$, $9.8{\pm}6.7$, $35.4{\pm}7.3$, and $11.5{\pm}8.5$, respectively. There was a significant increase in mean score post-tests (compared with pretests) in both groups (p<0.05). Although a better improvement in scores of retention tests was demonstrated in the SMS group, the mean subtraction value of the post- and pretests as well as retention- and pretests showed no significant difference between the 2 groups (p=0.3 and p =0.2, respectively). Conclusions: Our study shows that teaching via SMS may probably replace traditional face to face teaching for continuing education in working nurses. Larger studies are suggested to confirm this.