• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.3
• /
• pp.79-88
• /
• 2007

This paper suggests a hierarchial method to select the target sites for the nonpoint source pollution management considering factors which reflect the interrelationships of significant outflow characteristics of nonpoint source pollution at given sites. The factors consist of land slope, delivery distance to the outlet, effective rainfall, impervious area ratio and soil loss. The weight of each factor was calculated by an analytic hierarchy process(AHP) algorithm and the resulting influencing index was defined from the sum of the product of each factor and its computed weight value. The higher index reflect the proposed target sites for nonpoint source pollution management. The proposed method was applied to the Baran HP#6 watershed, located southwest from Suwon city. The Agricultural Nonpoint Pollution Source(AGNPS) model was also applied to identify sites contributing significantly to the nonpoint source pollution loads from the watershed. The spatial correlation between the two results for sites was analyzed using Moran's I values. The I values were $0.38{\sim}0.45$ for total nitrogen(T-N), and $0.15{\sim}0.22$ for total phosphorus(T-P), respectively. The results showed that two independent estimates for sites within the test water-shed were highly correlated, and that the proposed hierarchial method may be applied to select the target sites for nonpoint source pollution management.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.53-60
• /
• 2011

In this study, the priority was assessed and the compensation relationships were analyzed with regard to the issue of port development with conflicts among decision makers. First, the assessment factors were selected by the relevant literatures on port development, and fuzzy structure modeling was used to select assessment factors via structuralization analysis. Second, the local residents, port users, and local government were chosen as the main port-development related entities, and the analytic hierarchy process was used to calculate the total assessment value. Third, the justice based on majority power rule method was used as an assessment method that would minimize the amount of complaints according to the total assessment results and the alternative selection when a partnership was formed among the assessment entities. Moreover, the compensation issue according to the alternative selection was quantified, and the compensation relationships were analyzed. As a result, it was found that port development in Busan must be the top priority in terms of port development in South Korea, that awareness of environmental issues must be promoted among the port users, and that the local governments must promote environmental incentive policies for Environment-friendly port development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3907-3915
• /
• 2014

This paper provides a solution for long-term unexecuted urban parks and its implication by evaluating the policy elements using an analytic hierarchy process approach. The policy elements evaluation was carried out for a group of experts related to long-term unexecuted urban planning facilities or parks. The evaluation process consisted of the following three steps: the selection of policy elements, the weights assessment, and an analysis of the evaluation results. The empirical findings show that experts place a high value on policy elements, such as government subsidies (0.183), the linkage between a municipal fiscal plan and an executive plan (0.165), a reconsideration of the current long-term unexecuted urban parks (0.154), and a grant or long-term lease of state-owned land (0.110). A wide range of in-depth discussion is strongly needed ahead of the sunset regulation on urban parks, which will take effect in 2015.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.51-56
• /
• 2016

Purpose: As declines in the quality of residential environments occur, such as urban heat island effect, tropical night phenomenon, and violations of right to light and privacy due to urban densification and high rise building, these problems are emerging as social issues. In order to improve these issues, design factors which consider environmental aspects must be selected when planning apartment complexes, and ways to reflect them in the planning phase must be explored. Method: In this study, the analytical hierarchy process(AHP) was used to deduce design factors that considered environmental elements during the planning of apartment complexes. Furthermore, the priority and weight for each evaluation index were assessed. The objective was to propose a guideline for planning apartment complexes by finding the best solution for each evaluation index using complex weight values. Result: Floor area ratio was selected as the most important evaluation criterion in the environmentally conscious evaluation index for apartment complex planning. The shape and placement of skylights were selected as the most important evaluation criteria in the sunshine environment for a pleasant residential environment. Ground surface cover design was selected as the most important criterion in the outdoor thermal environment index for improving the microclimate within cities and apartment complexes. Thus, the results of this study can serve as an investigation guideline that concerns policy and regulations, and as reference data that can be used in planning apartment complexes.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.5
• /
• pp.395-406
• /
• 2015

The Ballast Water Treatment System was developed to prevent the unintended transport of unwanted organisms from one region to another as demanded by the IMO (International Maritime Organization). Although various types of BWTS in the world have been developed until now and applied to various ships, there has been no systematic basis for its selection and installation. Currently, the system selection and installation are as per ship owner’s suggestion or by easy installation point of view by the shipyard. In order to organize, systemize and solve problems related to the selection and installation of BWTS, a definitive study has been performed to come up with the best alternative to derive value and criteria which were to be met for vessels which are to be equipped with BWTS. Multiple criteria were compared alongside each other during the course of this study. Accordingly an AHP (Analytic Hierarchy Process) analysis method for A, B and C companies were done for container ships with size 10,000 TEU and above. Equipment type for “A” company is “Filter, UV & TiO2” combined type. For “B” company it is “Filter & UV” combined type. Finally for “C” company it is “Electrolysis” type. Henceforth, the results of this study aims to come up with the optimum way to select the best and the most suitable BWTS for a certain vessel.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.29-41
• /
• 2012

Competition between international Hub ports has been more and more intense. In order to invigorate itself, Gwang-Yang port has been making multilateral efforts. However, it has not still reached 300Millions TEU which is the standard to be permitted as a self-reliance Hub port. Therefore, a functional modification of berth should be considered. This study suggests to transform container berths to general berths. This article is focused on reserve berth mode of Gwang Yang hub port and selected three kinds of berths as alternative subjects of the study: general berth, exclusive berth, and multipurpose berth. This research has conducted that The subjects of the survey were in relation with Logistics as professional mutually group about Gwang-Yang hub port. The measurements of this survey were measure section and factor. Also, Fuzzy AHP(Analytic Hierarchy Process) was applied to the survey. According to the result, by measuring weight values of alternatives, the best favored one was multipurpose berth expect stability (32.6%), Exclusive berth was graded the most among the alternatives. Also, based on total weight value, the order of priority is as follows: multipurpose berth(38.2%), exclusive port(33.7%), general berth(28.1%).

• Journal of Science and Technology Studies
• /
• v.13 no.1
• /
• pp.77-109
• /
• 2013

The global diffusion of Evidence-Based Medicine (EBM) is changing the landscape of medicine and the healthcare system. STS scholars have shown how EBM works when put into practice. In continuing to add to the literature of previous scholars, this paper traces the historical process and debate over Prostate-Specific Antigen (PSA) testing as an early screening test for prostate cancer in the U.S. This study will reveal that both pros and cons of the testing using EBM as a crucial resources of the debate, and in the process both 'flexibly' interpret and mobilize the hierarchy of scientific evidence for EBM despite the fact the hierarchy is imagined to being scientific criteria that is rigid. Furthermore, this paper will argue that this phenomenon, for which EBM currently seems to support the cons side of PSA screening, was constructed in the context of appraisal of the value 'quality of life' in the EBM system. This case study proposes that those who study the debate of medical technology in the EBM era should contextualize and analyze EBM as part of this debate rather than simply taking EBM for granted.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.6
• /
• pp.188-196
• /
• 2007

Because the construction is becoming bigger and the construction environment is rapidly changing, IT/IS(Information Technology and Information System) of the construction is recently suggested with the alternative proposal. So not only is a study progressed in the area of the BIM(Buidilng Information Modeling), VC(Virtual Construction) and CIC (Computer-Integrated Construction) but also of the information database of the construction for building the information infrastructure of the construction in the domestic construction. Because object-oriented 3D CAD improves the efficiency of a design work and includes the object information which can use with the base of the information database of the construction, it has the high value not only in the design level but also in the construction life cycle. But compared with the effect, the use of 3D CAD is sluggish in the construction. In this study, after surveying about lowly using 3D CAD on the point of AEC (Architect-Engineer-Contract), the result is analyzed with AHP(Analytic Hierarchy Process). So the aim of this study is to offer the base to find the solution of the Affecting factors about lowly using 3D CAD.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.51-59
• /
• 2017

Due to the rapid change of global business environment, the growth of China's steel industry and the inflow of cheap products, domestic steel industry is faced on downward trend. The change of business paradigms from a quantitative growth to a qualitative product is needed in this steel industry. In this environment, it is very important for domestic steel distribution companies to secure their competitiveness by selecting good supply companies through a efficient procurement strategy and effective method. This study tried to find out the success factors of steel distribution industry based on survey research from experts. Weighted values of each factors were found by using AHP (analytic hierarchy process) analysis. The weighted values were applied to DEA(data envelopment analysis) model and eventually the best steel supply company were selected. This paper used 29 domestic steel distribution firms for case example and 5 steps of decision process to select good vendors were suggested. This study used quality, price, delivery and finance as a selection criteria. Using this four criterions, nine variable were suggested. Which were product diversity, base price, discount, payment position, average delivery date, urgency order responsibility and financial condition. These variables were used as a output variable of DEA. Sales and facilities were used as an input variable. Pairwise comparison was conducted using these variables. The weighted value calculated by AHP pairwise comparison were used for DEA analysis. Through the analysis of DEA efficiency process, good DMU (decision making unit) were recommended as a steel supply company. The domestic case example was used to show the effectiveness of this study.

• Journal of Information Technology Applications and Management
• /
• v.20 no.4
• /
• pp.235-247
• /
• 2013

The evolution of information technology and proliferation of hospital management and managerial applications of computing has led to change in the characteristics, uses and evaluations of software for the hospital management. With the growing proliferation of microcomputer use and the value-added for management strategies, more and more software has been massively developed, produced and distributed for the hospital industry. The user is faced with an increasingly difficult choice in the evaluation and selection of software. For many reasons, users frequently must rely on expert evaluations of the technical functions and quality of software. The objectives of this study are to provide selection criteria for an Electronic Medical Record (EMR) and to develop an evaluation framework for the Hospital Information Systems. The major findings of our study are as follows (1) the identification of EMR evaluation characteristics (2) the design and development of EMR selection model and (3) the evaluation of the importance for EMR characteristics using Analytic Hierarchy Process (AHP). We identify 6 characteristics and 22 sub-characteristics of the EMR, calculate their weights, and decide the best configuration. Especially, the AHP methodology can be applied to gather knowledge from multiple experts. Because AHP can 1) facilitate the participation of multiple experts 2) increase group productivity and therefore result in both quantitatively and qualitatively superior outcomes than that of a single individual's work 3) provide a mechanism for reconciling conflict from multiple expert 4) validate the acquired knowledge, providing consistency of facts, and 5) enhance the accuracy reliability of the acquired knowledge increase through of the reliability provided by consensus across multiple experts. Although some further research is required, the proposed model can be regarded as a basis for the selection of EMR.