• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.26-35
• /
• 1987

As an attempt to make the multi-objection for the line design of the rope way, the resulted formulas from the catenary curve as exact ones were summarized, and it was found out that the Kuhn-Tucker's optimality conditions and regions of the objective functions can analytically be expressed with dimensionless parameters. The Pareto's optimum solution set was analytically obtained through the objective function-the minimum relation of $W^{*}$, and $W^{*}$ is a trade-off relation. From this, The dimension of a rope and the value of an initial tension that are the standard in design of the rope way were determined. It was concluded that $V^{*}$ should become minimum, and that the ratio of the dimension of rope to the value of and initial tension become larger than superposition factor corresponding to curve AB.to curve AB.

• Communications for Statistical Applications and Methods
• /
• v.4 no.1
• /
• pp.229-241
• /
• 1997

We consider discrimination curve and minimum dwell time for Poisson distribution and Poisson-power function distribution. Let the random variable X has Poisson distribution with mean .lambda.. For the hypothesis testing H$\_$0/:.lambda. = t vs. H$\_$1/:.lambda. = d (d$\_$0/ if X.leq.c. Since a critical value c can not be determined to satisfy both types of errors .alpha. and .beta., we considered discrimination curve that gives the maximum d such that it can be discriminated from t for a given .alpha. and .beta.. We also considered an algorithm to compute the minimum dwell time which is needed to discriminate at the given .alpha. and .beta. for the Poisson counts and proved its convergence property. For the Poisson-power function distribution, we reject H$\_$0/ if X.leq..'{c}.. Since a critical value .'{c}. can not be determined to satisfy both .alpha. and .beta., similar to the Poisson case we considered discrimination curve and computation algorithm to find the minimum dwell time for the Poisson-power function distribution. We prosent this algorithm and an example of computation. It is found that the minimum dwell time algorithm fails for the Poisson-power function distribution if the aiming error variance .sigma.$\^$2/$\_$2/ is too large relative to the variance .sigma.$\^$2/$\_$1/ of the Gaussian distribution of intensity. In other words, if .ell. is too small, we can not find the minimum dwell time for a given .alpha. and .beta..

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.293-297
• /
• 2013

Background: : Chemotherapy-induced thrombocytopenia (CIT) is an important cause of morbitity in patients with cancer. Aim: To investigate the effect of the baseline plasma D-dimer level, an important marker for thrombotic activity, on chemotherapy-induced thrombocytopenia in patients with stage III colon cancer. Materials and Methods: A total of 43 (28 men) eligible patients were divided into two groups according to whether they exhibited chemotherapy-induced thrombocytopenia: Group 1 (n=21) and Group 2 (n=22). Comparison was made using demographic, histopathologic, and laboratory variables. Additionally, baseline plasma D-dimer levels underwent receiver operation characteristics curve analysis, and areas under the curve were calculated. Sensitivity, specificity, and positive and negative likelihood rates were then determined. Results: The incidence of chemotherapy-induced thrombocytopenia had a significant correlation with baseline platelet count (r=0.568, P=0.031) and baseline plasma D-dimer levels (r=0.617, P=0.036). When the cut-off point for the latter was set as 498 ng/mL, the area under the curve was 0.89 (95%CI: 0.74-0.93), the sensitivity was 91.4%, the specificity was 89.7%, the positive likelihood rate was 3.64 and the negative likelihood rate was 0.24 for chemotherapy-induced thrombocytopenia diagnosis. Conclusions: The baseline level of plasma D-dimer could help to differentiate high-risk patients for chemotherapy-induced thrombocytopenia.

• Biomedical Science Letters
• /
• v.11 no.2
• /
• pp.129-134
• /
• 2005

Three different deconvolution techniques for quantifying cerebral blood flow (CBF) from whole brain $T2^{\ast}-weighted$ bolus tracking images were implemented (parametric Fourier transform P-FT, parametric single value decomposition P-SVD and nonparametric single value decomposition NP-SVD). The techniques were tested on 206 regions from 38 hyperacute stroke patients. In the P-FT and P-SVD techniques, the tissue and arterial concentration time curves were fit to a gamma variate function and the resulting CBF values correlated very well $(CBF_{P-FT}\;=\;1.02{\cdot}CBF_{p-SVD},\;r^2\;=\;0.96)$. The NP-SVD CBF values correlated well with the P-FT CBF values only when a sufficient number of time series volumes were acquired to minimize tracer time curve truncation $(CBF_{P-FT}\;=\;0.92{\cdot}CBF_{NP-SVD},\;r^2\;=\;0.88)$. The correlation between the fitted CBV and the unfitted CBV values was also maximized in regions with minimal tracer time curve truncation $(CBV_{fit}\;=\;1.00{\cdot}CBV_{ Unfit},\;^r^2\;=\;0.89)$. When a sufficient number of time series volumes could not be acquired (due to scanner limitations) to avoid tracer time curve truncation, the P-FT and P-SVD techniques gave more reliable estimates of CBF than the NP-SVD technique.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.652-656
• /
• 2007

The major streams in South Korea have established the TMDL(Total Maximum Daily Loads) regulation for just 4 years. Traditional concepts in water quality management in South Korea are based upon the selection of a design streram flow which is 10-year averged flow exeedance probability 75%(Q275). That is, a single flow value based upon average long term flow conditions is chosen for application in dilution calculations, permit design, water quality modeling, etc. While these TMDLs seems to satisfy the requirement of the target water quality regulations, they have contributed little to any watershed/waterbody assessment and restoration plans. These types of TMDLs do little to characterize the problems the TMDLs are intended to address. For TMDLs to be more beneficial in the assessment and implementation process, TMDLs should reflect adequate water quality across flow conditions rather than at a single flow value such as average daily flow. In this paper, we developed LDC (load duration curve) methodology for theevaluation of Korean TMDL evaluation based on watershed scaled, physically based on SWAT(Soil and Water Assessment Tool) model.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.58-66
• /
• 2016

This study was performed to investigate drying characteristics and quality properties of dried persimmon with vacuum drying process. Drying characteristic curve of the dried persimmon showed that the constant rate drying period and falling rate drying period exist definitely. $_{\circ}Brix$, sugar content and hardness value of the dried persimmon increased as the vacuum pressure and heating temperature increased, but L value of the dried persimmon lower. The results indicated that the optimal conditions were at vacuum pressure of 40~50kPa abs., heating temperature of $30^{\circ}C$ and drying time of 3~4days.

• Journal of Korea Water Resources Association
• /
• v.43 no.3
• /
• pp.265-273
• /
• 2010

This study proposed the method that can calculate discharge using hydraulic characteristics that can acquire easily-comparatively such as hydraulic radius, bed slope, depth to improve the stage-discharge curve equation considering only stage. Roughness coefficient n value and C value that hydraulic characteristics of rivers is reflected from Manning's equation and Chezy's equation using the measured data of the natural open channel in the report of Albert University estimated and calculated discharge on the basis of this. The method proposed in this study was calculated stunningly to measured discharge. And that compared with discharge by existent stage-discharge curve.

• The Journal of Korean Medicine
• /
• v.43 no.1
• /
• pp.1-5
• /
• 2022

Objectives: Using algometer, measure the pressure pain threshold (PPT) of the epigastric pain(心下痞硬) and calculate the cut-off value, and this can serve as the basis for prognostic diagnosis of functional dyspepsia so we would like to evaluate its diagnostic value. Methods: We investigated 353 patients with functional dyspepsia symptoms who admitted Gangnam Weedahm Oriental Hospital from February 1, 2021 to February 27, 2021. At the time of the patient's visit, an oriental medical doctor measured the pressure at the first pain point on the Algometer of (CV14), twice each, at 1minute intervals. The ROC (receiver operating characteristic) curve and the optimal cut-off value derived through the diagnosis of the (CV14) PPT value for epigastric pain(心下痞硬) and the gold standard of oriental medical doctor, it was evaluated through. Results: In 353 patients, the area under the ROC curve (AUC) was 0.909 (p=0). In addition, the optimal cutting value was 10.05 (kg/cm2), which was statistically significant. Additionally, the sensitivity of the Algometer's PPT measurement was 0.704 and the specificity was 0.884. As a result, if the PPT value of the Algometer exceeds 10.05 (kg/cm²) in terms of the optimal cutting value, it can be seen that epigastric pain(心下痞硬) is lost. Conclusion: Algometer's PPT value measurement can be a reliable test method for quantification of epigastric pain(心下痞硬) diagnosis and can be useful as an objective indicator.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.31-40
• /
• 1978

For the purpose of estimating the status of physical growth of primary school students in Busan area, the author had performed an investigation and analysis on the physical integrated value for past 6 years of random sampled 656 students (male 374, female 282). The summarized results were as follows : 1. The most rapid growth age of body-height was 7-8 years old as 5.9 cm in male and 10-11 years old in female as 6.5 cm, and the growth curve of body-height was crossed at 10-11 years old. 2. The most rapid growth age of body-weight was 9-10 years old as 3.1 kg in male and 10-11 years old in female as 3.9 kg, and the growth curve of body-weight was crossed at 10-11 years old. 3. The most rapid growth age of chest-girth was 8-9 years old as 3.1 cm in male and 9-10 years old in female as 2.9 cm, and the growth curve of chest-girth was not corssed. 4. The most rapid growth age of sitting-height was 6-7 years old in both sex as 3.3 cm and 3.4 cm, and the growth curve of sitting-height was crossed at 8-9 years old. 5. Using the physical integrated value was much simple and desirable at comparing with the areas. And the physical integrated value of primary school students on Busan area compared to Korean standard physical status was relatively good as body-height +0.33, +0.30, body-weight +0.33,+0.35, chest-girth +0.65, +0.57 and sitting-height +0.10, +0.20 with each sex.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03a
• /
• pp.49-52
• /
• 1999

In the present study the tensile test was carried out for steel sheets to offer the database for the material characteristics at various temperature condition. The results are constructed with tensile strength total elongation Lankford vale and the flow curve and these can be employed usefully into the analyzing program as input data for the sheet metal forming processes at warm condition.