• Journal of Sasang Constitutional Medicine
• /
• v.3 no.1
• /
• pp.151-172
• /
• 1991

Comparative blood analysis was carried out to investigate the change of blood constituent in TAE-EUM-IN group and control group. RBC, WBC, hemoglobin, hematocrit, total protein, triglyceride, phospholipid, total cholesterol, LDL-cholesterol, HDL-cholesterol, BUN, creatinine, ACTH, cortisol and prostaglandin E and $F_2{\alpha}$ were measured. And the following results were obtained: 1. In the change of blood cell, the value of hematocrit showed significant difference, while that of RBC, WBC and himoglobin didn't. 2. In the change of protein, the value of total protein showed significant difference, but that of albumin didn't. 3. In the change of lipid and cholesterol in serum, the value of triglyceride, phospholipid, total cholesterol and LDL-cholesterol indicated significant difference, while that of HDL-cholesterol indicated significant difference, while that of HDL-cholesterol didn't. 4. The value of BUN in serum represented significant difference, but that of creatinine didn't. 5. The value of cortisol in plasma showed significant difference, but that of ACTH didn't. 6. The value of prostaglandin E and $F_2{\alpha}$ in plasma showed significant difference. These results suggest that investigation on hormones and blood constituents enables objectification in differentiation of four types of physical constitution.

• Journal of Climate Change Research
• /
• v.8 no.2
• /
• pp.81-89
• /
• 2017

In this study CALPUFF was used to estimate the influence of temperature rise, according to the observation value of temperature rise based RCP scenario, on meteorological elements (wind direction, wind speed, mixing height) and the change of pollutant diffusion. According to the result. applying estimated value of year 2050 temperature rise, the mixing height is increased as per the temperature rise, so the range of atmospheric diffusion is widened. In summer case, by applying temperature rise of $4^{\circ}C$ and comparing with before applying temperature rise, there was change of diffusion range as per the change of temperature between 10 AM to 11 PM. And the range of diffusion was wider than that of before temperature rise. In winter case, by applying estimated value of temperature rise, $2.3^{\circ}C$, diffusion range has been changed between 8 AM to 4 PM, showing different diffusion aspect from summer. Also, according to the result of air pollution level assessment with temperature rise, it was proved that the ratio of area with increasing air pollution level has been getting higher by increase of temperature.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.3
• /
• pp.91-104
• /
• 2008

This study developed the WSM (weighted scenario method)-AHP method that can optimize the weighting value for multi-criteria to make GIS grid-based potential surface. The potential surface has been used to simulate urban expansion using distributed cellular automata model and to generate land-use planning as basic data. This study formulated the WSM-AHP method in mathematically and applied to test region, Suwon city, which located on south area from Seoul. WSM-AHP method generates potential map for each pair of weighting value for all criteria, which one criterion is weighted with high weighting value and the others use low weighting value, considering that the summation for all criteria weighting values should be "1". The potential change rate to the step of weighted scenario for weighting value of criteria is standardized like AHP intensity matrix in this study. From the standard potential change rate, WSM-AHP intensity matrix is completed, and then the optimal weighting value is calculated from the maximum eigenvector of the WSM-AHP matrix, according to the new WSM-AHP method developed in this study. The applied results of new method showed that the optimal weighting value from WSM-AHP is more resonable than the general AHP specialists' evaluation for weighting value. The another new finding of this study is to suggest the deterministic approach to optimize the weighting value for the distributed CA model, which is used to find new city area and to generate rational land-use planning.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.383-385
• /
• 2010

This study analyzed the change of flowout and suspend solid in Andong and Imha basin according to the climate change to develop evaluation index about turbid water occurrence possibility and to support the countermeasures for turbid water management using GIS-based Soil and Water Assessment Tools (SWAT). MIROC3.2 hires model values of A1B climate change scenario that were supplied by Intergovernmental Panel on Climate Change (IPCC) were applied to future climage change data. Precipitation and temperature were corrected by applying the output value of 20th Century Climate Coupled Model (20C3M) based on past climate data during 1977 and 2006 and downscaled with Change Factor (CF) method. And future climate change scenarios were classified as three periods (2020s, 2050s, 2080s) and the change of flowout and suspended solid according to the climate change were estimated by coupling modeled value with SWAT model.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.355-360
• /
• 2000

There are many changed while a design is completed. Therefore, if the impact of the design changes is estimated, it may result in the improvement of design efficiency. But, the design changes have various types and affect other parts of the design system. Hence, it is difficult to deal with design changes directly. The purpose of this research is to develop a systematic change propagation tracing algorithm and a method of change impact analysis and then, to implement a change impact analysis system. Process based design is set up for the field of this research. Also the design, composed of design parameters and constraints, is set up for the subject of the research. Change propagation tracing algorithm traces change propagation based on the following concept : If the design parameters are changed, other parameters within the constrains including them may be changed. Using the result of change propagation tracing algorithm, changeable parameters, constraints and tasks can be found. The method of change impact analysis, to calculate change impact value from this changeable tasks, is developed. Change propagation tracing algorithm and the method of change impact analysis are implemented into change impact analysis system and it is applied to the redesign of 2 stage gear drives. It can support different kinds of design activities systematically. especially, at the redesign step, where many design change alternatives exist, change impact value of each alternative exist, change impact value of each alternative is calculated and design change is performed toward direction to minimize the impact of design change. Consequently, it is expected to improve the efficiency of the whole design.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.2
• /
• pp.63-69
• /
• 2016

Objective: To evaluate the effects of sit-to-stand (STS) imagery group training (IGT) on STS movement and balance performance for chronic hemiparetic stroke. Design: Randomized controlled trial. Methods: A total of 30 people with chronic hemiparetic stroke (15 for STS-IGT group and 15 for control) were recruited in this study. The STS-IGT group participated in a videotape-based STS-IGT for 30 minutes a day, five days a week for six weeks, while the control group watched a documentary on television for the same period. The STS-IGT focused on a five-stage protocol. Specifically, external imagery was used during the four phases of the STS movement from the seat of the chair to standing up. All of the participants also participated in a regular rehabilitation program. STS movement and balance performance were assessed using three clinical measures. Results: After training, time to perform the 5-repetition STS test significantly increased in the STS-IGT group (change value, $4.0{\pm}2.0$ sec) compared with the control group (change value, $0.9{\pm}0.7$ sec) (p<0.05). There was a greater improvement in Berg balance scale scores in the STS-IGT group (change value, $0.2{\pm}4.1$ points) compared with the control group (change value, $0.3{\pm}0.9$ points) (p<0.05). There was a greater improvement in Timed Up and Go scores in the STS-IGT group (change value, $2.6{\pm}1.5$ sec) compared with the control group (change value, $0.9{\pm}1.0$ sec) (p<0.05). Conclusions: STS-IGT can be considered as a useful option for restoration of STS movement and balance performance for individuals with chronic hemiparetic stroke who are unable to fully participate in physical activities.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.330-338
• /
• 2016

Phase change memory (PCM) has been studied as an emerging memory technology for last-level cache (LLC) due to its extremely low leakage. However, it consumes high levels of energy in updating cells and its write endurance is limited. To relieve the write pressure of LLC, we propose a delta value indicator (DVI) by employing a small cache which stores the difference between the value currently stored and the value newly loaded. Since the write energy consumption of the small cache is less than the LLC, the energy consumption is reduced by access to the small cache instead of the LLC. In addition, the lifetime of the LLC is further extended because the number of write accesses to the LLC is decreased. To this end, a delta value indicator and controlling circuits are inserted into the LLC. The simulation results show a 26.8% saving of dynamic energy consumption and a 31.7% lifetime extension compared to a state-of-the-art scheme for PCM.

• Journal of Technology Innovation
• /
• v.7 no.1
• /
• pp.14-35
• /
• 1999

This paper presents the relationship between the pace of structural change and the magnitude of employment growth in the manufacturing sector in OECD countries. To measure the pace of structural change, the compositional change index in value-added in manufacturing sector is introduced. For mid to long-term there seems to be a positive relationship between the pace of structural change and the magnitude of employment growth. In those countries with higher value of the compositional index, the employment growth in manufacturing sector was generally higher. To analyse the characteristics of structural change in manufacturing sector, this paper classifies manufacturing industries into groups: one based on technology, one on orientation, one on wages and one on skills. The international comparison of manufacturing sector's employment patterns based on above four classifications are presented. International comparison suggests that Korean manufacturing sector move into jobs with more skills and knowledge The structural change of SMEs and large firms are compared based on above four classification methods. It is shown that SMEs' employment in low value sectors, that is low-technology, labor-intensive, tow-wage, and unskilled sectors, have risen faster than SMEs' employment in high-technology, science-based, high-wage and skilled sectors. Large firms' employment have been mainly increased in high value sectors. However, the employment growth of both large and small firms have been concentrated on production worker-intensively-using sectors, i.e. unskilled sectors. This widened the wage differential of production workers by firm sizes and concurrently led to severe shortage of production workers for SMEs, which has little ability to pay high wage to production workers because they usually belong to low-wage sectors. Korea need to push SMEs forward to high value sectors. The premise of that is, however, to pull large firms out of production worker-intensively-using sectors.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.2
• /
• pp.84-89
• /
• 2006

Objective : The purpose of this study is to compare the outcomes of two methods for stabilization and fusion : Postero-Lateral Fusion [PLF, pedicle screw fixation with bone graft] and Posterior Lumbar Interbody Fusion [PLIF, cage insertion] for spinal stenosis and recurred disc herniation except degenerative spondylolisthesis. Methods : Seventy one patients who underwent PLF [n=36] or PLIF [n=35] between 1997 and 2001 were evaluated prospectively. These two groups were compared for the change of interbody space, the range of segmental angle, the angle of lumbar motion, and clinical outcomes by Prolo scale. Results : The mean follow-up period was 32.6 months. The PLIF group showed statistically significant increase of the interbody space after surgery. However, the difference in the change of interbody space between two groups was insignificant [P value=0.05]. The range of segmental angle was better in the PLIF group, but the difference in the change of segmental angle was not statistically significant [P value=0.0l7]. Angle of lumbar motion was similar in the two groups. Changes of Prolo economic scale were not statistically significant [P value=0.193]. The PLIF group showed statistically significant improvement in Prolo functional scale [P value=0.003]. In Prolo economic and functional scale, there were statistically significant relationships between follow-up duration [P value<0.001]. change of interbody space [P value<0.001], and range of segmental angle [P value<0.001]. Conclusion : Results of this study indicate that PLIF is superior to PLF in interbody space augmentation and clinical outcomes by Prolo functional scale. Analysis of clinical outcomes showed significant relationships among various factors [fusion type, follow-up duration, change of interbody space, and range of segmental angle]. Therefore, the authors recommend instrumented PLIF to offer better clinical outcomes in patients who needed instrumented lumbar fusion for spinal stenosis and recurred disc herniation.

• Journal of Distribution Science
• /
• v.16 no.10
• /
• pp.55-64
• /
• 2018

Purpose - The most important goal of corporate management is the maximization of firm value in the market. Executives of companies are making effort to increase corporate value and initiate various management strategies, which is to develop the products or service with value. Through these efforts, consumer satisfaction grows and loyalty increases, which leads to the positive change of customer satisfaction index. The purpose of this research is to find out the abnormal return after the KCSI(Korean Customer Satisfaction Index) is announced. Research design, data, and methodology - This research data is collected from 11 years' stock price in KOSPI market and KCSI. The authors analyze the abnormal return triggered by the announcement of KCSI through the event study. Results - First, newly enlisted companies in the KCSI show statistically significant short-term abnormal rate of return. Second, the value of the customer satisfaction index is not the level of customer satisfaction but the direction of the change in the CSI. Conclusion - Customer satisfaction has the important intangible asset in the marketing area. However, firms' investment for CS is not an easy decision, because of the difficulty to measure the effect on corporate market value. This research investigates the change of the market value after the announcement of KCSI. Based on the results, firms have to keep trying to increase KCSI relative to the previous year. And the small company has to struggle for being newly listed in the KCSI.