• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.565-573
• /
• 2006

Acoustic analysis of a moving sound source required that the measured sound signals be do-Dopplerized and restored as of the original emission signals. The purpose of this research is development of beamforming technique can be applied to the rotor noise source identification. For the do-Dopplerization and reconstruction of emitted sound wave, Forward Propagation Method is applied to the time domain beamforming technique. And validation test were performed using rotating sound source constructed by bended pipe and horn driver. In the validation test using sinusoidal sound wave, sufficient performance of signal processing can be seen, and the effect of measuring duration for accuracy was compared. In the prop-rotor measurements, the acoustic source locations were successfully verified in varying positions for different frequencies and collective pitch angle, in hover condition.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3182-3195
• /
• 2021

The implementation and validation of multi-dimensional (multi-D) features in thermal-hydraulic system codes aims to extend the application of these codes towards multi-scale simulations. The main goal is the simulation of large-scale three-dimensional effects inside large volumes such as piping or vessel. This novel approach becomes especially relevant during the simulation of accidents with strongly asymmetric flow conditions entailing density gradients. Under such conditions, coolant mixing is a key phenomenon on the eventual variation of the coolant temperature and/or boron concentration at the core inlet and on the extent of a local re-criticality based on the reactivity feedback effects. This approach presents several advantages compared to CFD calculations, mainly concerning the model size and computational efforts. However, the range of applicability and accuracy of the newly implemented physical models at this point is still limited and needs to be further extended. This paper aims at contributing to the validation of the multi-D features of the system code ATHLET based on the simulation of the Tests 1.1 and 2.1, conducted at the test facility ROCOM. Overall, the multi-D features of ATHLET predict reasonably well the evolution from both experiments, despite an observed overprediction of coolant mixing at the vessel during both experiments.

• 한국보육지원학회지
• /
• 제18권4호
• /
• pp.1-16
• /
• 2022

Objective: The purpose of this study is to test the psychometric properties of the Maternal Emotion Coaching Questionnaire (MECQ, Lim et al., 2018) in order to measure emotion coaching in mothers of preschoolers. Methods: A total of 316 preschoolers and their mothers participated in this study. Maternal emotion coaching was assessed by self-report and child emotion regulation ability was evaluated by the teacher. Data were analyzed with chi-square tests, reliability analysis, confirmatory factor analysis, latent profile analysis, and F-test. Results: Each item of the MECQ showed proper discriminative power. The MECQ and each subscale demonstrated adequate internal consistency and split-half reliability. Evidence of construct validity was provided by confirmatory factor analysis. The five-factor model including maternal attention, awareness, acceptance, empathy, and guidance showed a good fit. Results of the latent profile analysis revealed three profiles of emotion coaching: excellent, good, and poor. Preschoolers with mothers in the poor coaching profile showed significantly lower emotion regulation ability compared to those in the excellent or good coaching profiles, which suggested discriminative validity of the MECQ. Conclusion/Implications: The MECQ presents a reliable and valid tool to assess emotion coaching in mothers of preschool children and can thus be effectively used for mothers of preschoolers.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.400-406
• /
• 2010

This paper deals with parameter tuning of the Power System Stabilizer (PSS) for 612 MVA thermal power plants in the KEPCO system and its validation in a field test. In this paper, the selection of parameters, such as lead-lag time constants for phase compensation and system gain, is optimized using linear and eigenvalue analyses. This is then verified through the time-domain transient stability analysis. In the next step, the performance of PSS is finally verified by the generator's on-line field test. After the field test, measured and simulated data are also compared to prove the effectiveness of the models used in the simulations.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.107-114
• /
• 2021

High penetration of renewable energy generators causes unnecessary investment for power system facilities. Especially with Korean government policies such as Renewable Energy 3020 and Inter-connection support Responsibility of KEPCO for 1 MW DERs, the applications of DER interconnection in distribution system have been increasing. To save the investment, smart control functions for DERs are required and the test bed for the inverters which have not been prepared are necessary to insure DER inter-connection stability. For this, test bed for advanced functions of a smart inverter has been constructed and the tests for necessary functions have been implemented. In this paper, the test bed and environment as well as specifications are introduced and the test results for the validation of the functions are analyzed.

• 정보보호학회논문지
• /
• 제19권4호
• /
• pp.91-103
• /
• 2009

암호알고리즘 및 암호함수를 하드웨어적 또는 소프트웨어적으로 구현한 암호모듈을 암호모듈검증체계 (Cryptographic Module Validation Program, CMVP) 내에서 시험 (또는 인증, 검증)을 받기 위해서는 암호모듈에 대한 유한상태모델(Finite State Model, FSM) 이 개발되고 제공되어야한다. 그러나 FSM을 체계적으로 모델링하고 분석하는 지침은 개발자와 시험자의 경험이므로 잘 알려져 있지 않다. 본 연구에서는 CMVP내에서 암호모듈의 검증을 위해 요구되는 FSM의 모델링, 분석지침, 천이시험경로 생성알고리즘을 제시하고 모델링도구인 CM-Statecharter를 개발하였다. FSM은 UML 2.0의 상태도를 이용해 모델링한다. 상태도는 FSM의 부족한 점 을 보완하고 암호모듈의 FSM을 정형적이고 쉽게 명세할 수 있는 모델이다.

• 방송공학회논문지
• /
• 제26권6호
• /
• pp.790-798
• /
• 2021

본 논문에서는 기존의 도래각을 활용한 블루투스 기반의 측위방식에 각도 및 거리 유효성 검사를 추가하여 측위의 정확도를 개선하는 방식을 제안한다. 기존의 측위방식은 비 가시거리 환경에서 유발되는 다중경로 현상 등에 의하여 측위 값에 오차가 발생하는 현상이 발생한다. 제안된 방식은 피 측위 장치의 이동속도를 고려하여 측정될 수 있는 최대 도래각과 최소 도래각을 도출한 후 측정된 도래각이 최대 도래각과 최소 도래각 범위를 초과하는지를 검사하는 각도 유효성 검사와 측정된 피 측위 장치의 위치 및 측위 장치와의 거리가 유효거리를 초과하는지 검사하는 거리 유효성 검사를 시행하여 측위의 정확성을 제고한다. 제안된 방식과 기존 방식과의 측위 성능을 분석하기 위하여 모의실험을 실시하고, 모의실험 결과를 통해 측위 오차가 증대되는 상황에서는 기존의 방식에 비하여 각도 및 거리 유효성 검사를 통해 측위 성능이 개선됨을 확인한다.

• 한국항공우주학회지
• /
• 제44권11호
• /
• pp.933-940
• /
• 2016

본 연구에서는 MW 용량의 풍력터빈 블레이드용 에어포일의 설계 단계에서 성능 검증기법에 대한 비교 연구를 수행하였다. 이를 위해 5~10 MW 해상풍력터빈용으로 설계된 21%와 30% 두께비의 에어포일을 사용하여 풍동시험을 수행하였으며, 레이놀즈 수 $1.0{\times}10^7$ 조건에서의 XFOIL의 해석결과와 상호 비교하였다. 풍동시험은 자유흐름 속도 50 m/s, 시위 기준 레이놀즈 수는 $2.2{\times}10^6$에서 수행되었으며, 표면거칠기 효과는 지그재그 테이프를 사용하여 모사하였다. 비교 결과 풍동시험과 XFOIL 해석에는 차이를 보이지만, 풍동시험을 통해 받음각 변화에 따른 에어포일 표면에서의 압력분포 변화와 기본적인 공력 성능 및 표면거칠기 효과를 확인 할 수 있었다. XFOIL은 설계조건에서 기본적인 양항비와 표면거칠기 효과에 의한 양항비 변화 등을 확인 할 수 있었다.

• 아동학회지
• /
• 제9권2호
• /
• pp.1-28
• /
• 1988

The purpose of this study was to develop a behavior rating scale for the evaluation of children's development for utilization by preschool teachers. The procedures for the study included content validation, pilot test, and main study. A total of 97 items were retained after the content validation and pilot test. The items of the scale were grouped into five areas (physical, language, cognitive, emotional, and social development) and 11 sub-areas. The resulting "Behavior Rating Scale for Preschool Children" was administered to 479 boys and girls, 3-6 through 6-5 years of age, selected from 10 different kindergartens and early education centers in Seoul, Pusan, and Chonju. The analysis of data was done with SPSS computer programs, including item analysis, Cronbach's ${\alpha}$ for reliability, factor analysis to test construct validity, two-way ANOVA to test age and sex differences, and percentile norms. The 97 items of the scale were found to be satisfactory in terms of item discrimination with indices ranging from .31 to .73. Cronbach's ${\alpha}$ was .98 for the total scale and ranged from .87 to .93 in specific domains, which was considered satisfactory. The factors extracted from each area were consistent with the educational objectives of the Yonsei Open Education Program except for emotional development. The intercorrelations among the domains were relatively high, ranging from .56 to .81. Age differences were significant in cognitive, physical, and language development, but not significant in social and emotional development. Sex differences were significant in all areas with girls higher on the average than the boys. Percentile ranks were drived from the total score for each age group and quartiles were calculated for sub-scores in each domain.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1638-1645
• /
• 2006

This paper proposes a modeling technique which is able to not only reliably and easily represent the hysteretic characteristics but also analyze the dynamic stress of a taper leaf spring. The flexible multi-body dynamic model of the taper leaf spring is developed by interfacing the finite element model and computation model of the taper leaf spring. Rigid dummy parts are attached at the places where a finite element leaf model is in contact with an adjacent one in order to apply contact model. Friction is defined in the contact model to represent the hysteretic phenomenon of the taper leaf spring. The test of the taper leaf spring is conducted for the validation of the reliability of the flexible multi-body dynamic model of the taper leaf spring developed in this paper. The test is started at an unloaded state with the excitation amplitude of $1{\sim}2mm/sec$ and frequency of 132 mm. First, the simulation is conducted with the same condition as the test. Then, the simulations are conducted with various amplitudes in a loaded state. The hysteretic diagram from the test is compared with the ones from the simulation for the validation of the reliability of the model. The dynamic stress analysis of the taper leaf spring is also conducted with the developed flexible multi-body dynamic model under a dynamic loading condition.