• Structural Engineering and Mechanics
• /
• v.43 no.2
• /
• pp.179-197
• /
• 2012

This study presents the findings of the structural health monitoring and the real time system identification of one of the first large scale building instrumentations in Turkey for earthquake safety. Within this context, a thorough review of steps in the instrumentation, monitoring is presented and seismic performance evaluation of structures using both nonlinear pushover and nonlinear dynamic time history analysis is carried out. The sensor locations are determined using the optimal sensor placement techniques used in NASA for on orbit modal identification of large space structures. System identification is carried out via the stochastic subspace technique. The results of the study show that under ambient vibrations, stocky buildings can be substantially stiffer than what is predicted by the finite element models due to the presence of a large number of partitioning walls. However, in a severe earthquake, it will not be safe to rely on this resistance due to the fact that once the partitioning walls crack, the bare frame contributes to the lateral stiffness of the building alone. Consequently, the periods obtained from system identification will be closer to those obtained from the FE analysis. A technique to control the validity of the proportional damping assumption is employed that checks the presence of phase difference in displacements of different stories obtained from band pass filtered records and it is confirmed that the "proportional damping assumption" is valid for this structure. Two different techniques are implemented for identifying the influence of the soil structure interaction. The first technique uses the transfer function between the roof and the basement in both directions. The second technique uses a pre-whitening filter on the data obtained from both the basement and the roof. Subsequently the impulse response function is computed from the scaled cross correlation between the input and the output. The overall results showed that the structure will satisfy the life safety performance level in a future earthquake but some soil structure interaction effects should be expected in the North South direction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.119-132
• /
• 2004

As geographic object is consisted of 3-dimensional, it must be appropriated use the 3-dimensional coordinate system to express for exact representation. To define 3-dimensional+temporal object model we extended 3-dimensional space and valid time from object model of OpenGIS consortium that is limited to 2-dimensional space. This methodology guarantees compatibility with other systems to construct with the open model. Also, it permitted administration for two kinds of object by considering both objects whose position and shape changes discretely over time and objects whose position changes continuously. 3-dimensional+temporal object model was implemented by 3-dimensional+temporal object component using OLE/COM techniques. The interfaces of the component defined based on 3-dimensional+temporal object model. To use this component, we implement the data consumer for 3-dimensional+temporal data.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.64-72
• /
• 2007

Under the AE methods, the valid condition analysis and evaluation the leak etc, resulted by the AE signal pattern on the bottom plate of ground tank at full. In next more, the gradient of accumulation amplitude distribution analysis and comparison the energy, count, and duration time that noise of EMI signal were removed. EMI signal showed height-energy, count, and duration time, it also appeared great gradient of accumulation distribution. Then, with the pure remaining AE signals cluster analysis and location. It would possibly assume of damage with corrosion. Total cluster 20 and energy showed between the maximum 11,990 and 8,565 which is much lower than above figure and event number showed from 8 to 5. Even when it difficult to certify damage by open, as it is raised higher height-sensitivity and threshold by 60 dB. It would possibly presume of location source more accurately.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.43-56
• /
• 2002

Most of works have been performed on representation of spatiotemporal objects from various points of view. Most of them represent spatiotemporal objects using approaches from GIS, temporal databases, object-oriented databases or data type. Spatiotemporal objects can be classified as objects whose position and shape changes discretely over time, objects whose position changes continuously and objects whose shape changes continuously as well as position. Previous works on spatiotemporal model have focused on only one of them. In this paper, we propose a spatiotemporal model that can represent three types of objects in Euclidean plan. For this purpose, we represent both discrete and continuous moving objects by defining temporal model extended from valid time and by defining relationship between two consecutive versions of objects. The proposed spatiotemporal object model is based on open GIS specification so that it has compatibility with existing spatial data model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.536-541
• /
• 2007

In video coding standard H.264/AVC, motion estimation using multiple reference pictures improves compression efficiency but the efficiency depends upon image content not the number of reference pictures. So, the motion estimation includes a large amount of computation of no worth according to image. This paper proposes fast motion estimation algorithm that removes worthless computation in the motion estimation using multiple reference pictures. The proposed algorithm classifies a block into valid and invalid blocks for the multiple reference pictures and removes the workless computation by applying a single reference picture to the invalid block. To estimate the proposed algorithm's performance, image quality, bit rate, and motion estimation time are compared with ones of the conventional algorithm in the reference software JM 9.5. The simulation results show that the proposed algorithm can considerably save about 38.67% the averaged motion estimation time while keeping the image quality and the bit rate, whose are average values are -0.02dB and -0.77% respectively, as good as the conventional algorithm.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.237-244
• /
• 2015

Export-led policies, FTA signed and economics of scale through a variety of market-oriented policies, such as regulations to improve market grew constantly. Accordingly, the correct decision making accurately analyze the economics market for decision, a problem has been an important issue in predicting. For accurate analysis and decision-making of the most common indicators of the stock market by proposing a number of indicators of economic transformation techniques were applied to the convergence model combining estimation and forecasts problem confirmed its effectiveness. Experimental result, gave the model estimation method to apply a transform to show the valid combinations proposed model state estimation result was confirmed in a very similar exercise aspect of the physical problem and the KOSPI index prediction.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.241-250
• /
• 2016

AVM(Around View Monitoring) is a function of ADAS(Advanced Driver Assistance Systems), which provides a bird's eye view of the surroundings of a vehicle to the user. AVM systems require large bandwidth since they are composed of four input images and require real-time processing for vehicle-embedded environments. Also, the memory bandwidth requirement increases greatly when the resolution of the input data is higher. In this paper, we propose four basic hardware models of AVM systems. The models are decided by whether or not there is a valid data extraction module and an image processing purpose LUT generation module. We analyze the required bandwidth and hardware resource for each model. For verification of the proposed models, we implemented an AVM system using XC7Z045 FPGA and DDR3 memory for VGA and FHD resolution. All four of the proposed hardware model is executed below 33ms, which shows that it can operate in real-time.

• Journal of KIISE:Databases
• /
• v.29 no.5
• /
• pp.335-346
• /
• 2002

LBS(Location Based Services) provide the location-based information to its mobile users. The primary functionality of these services is to provide useful information to its users at a minimum cost of resources. The functionality can be implemented through data mining techniques. However, conventional data mining researches have not been considered spatial and temporal aspects of data simultaneously. Therefore, these techniques are inappropriate to apply on the objects of LBS, which change spatial attributes over time. In this paper, we propose a new data mining technique for identifying the temporal patterns from the series of the locations of moving objects that have both temporal and spatial dimension. We use a spatial operation of contains to generalize the location of moving point and apply time constraints between the locations of a moving object to make a valid moving sequence. Finally, the spatio-temporal technique proposed in this paper is very practical approach in not only providing more useful knowledge to LBS, but also improving the quality of the services.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.573-579
• /
• 2015

Nationwide supercomputing infrastructures in Korea consist of geographically distributed supercomputing clusters. We developed High-Throughput Computing as a Service(HTCaaS) based on these distributed national supecomputing clusters to facilitate the ease at which scientists can explore large-scale and complex scientific problems. In this paper, we present our mechanism for dynamically managing computing resources and show its effectiveness through a case study of a real scientific application called drug repositioning. Specifically, we show that the resource utilization, accuracy, reliability, and usability can be improved by applying our resource management mechanism. The mechanism is based on the concepts of waiting time and success rate in order to identify valid computing resources. The results show a reduction in the total job completion time and improvement of the overall system throughput.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.617-625
• /
• 2009

NAND flash memory is widely used in embedded systems because of many attractive features, such as small size, light weight, low power consumption and fast access speed. However, it requires garbage collection, which includes erase operations. Erase operation is very slow. Besides, the number of the erase operations allowed to be carried out for each block is limited. The proposed garbage collection method focuses on minimizing the total number of erase operations, the deviation value of each block and the garbage collection time. NAND flash memory consists of pages of three types, such as valid pages, invalid pages and free pages. In order to achieve above goals, we use a page rate to decide when to do garbage collection and to select the target victim block. Additionally, We implement allocating method and group management method. Simulation results show that the proposed policy performs better than Greedy or CAT with the maximum rate at 82% of reduction in the deviation value of erase operation and 75% reduction in garbage collection time.