• Plant Resources
• /
• 제5권1호
• /
• pp.70-73
• /
• 2002

To develop an optimal storage method of root of Angelica acutiloba Radix, which has been grown as major herbal medicine material to be cultivated, root of Angelica acutiloba Radix, was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between packing materials but was significantly different between sealing conditions. In conclusion, vacuum packing and complete sealing with polyethylene film appears to be most optimal for storage of Angelica acutiloba Radix.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.870-873
• /
• 2003

We have fabricated a carbon nanotube field emission display(CNT FED) panel with a 2 inch diagonal size by using screen printing method and vacuum in-line sealing technology. The sealing temperature of the panel was around 390 $^{\circ}C$ and the leak test was carried out for 72 hrs after sealing process. When field emission properties of fabricated and sealed CNT FED panel were characterized and compared with those of unsealed panel which was located in vacuum chamber of vacuum level similar with the sealed panel, the sealed panel showed more improved field emission properties.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1016-1021
• /
• 2013

수소혼합가스토치를 이용하여 유리 모서리 접합 시 접합부의 형상은 수소혼합가스의 유량, 토치의 이송속도, 토치와 유리사이의 거리 등 많은 공정변수들에 의해 영향을 받는다. 모서리 접합형상은 유리패널의 단열 및 기밀, 강도성능에 영향을 미치므로, 공정변수에 따른 접합부 형상예측에 대한 연구가 수행되어야 한다. 따라서 본 논문에서는 공정변수 설정 및 실험분석을 통하여, 공정변수에 따른 단면형상을 예측할 수 있는 회귀식을 도출하였다. 도출된 회귀식에 각 공정변수값을 적용하여 접합형상을 예측하고, 실제 모서리 접합 실험결과와 비교하여 회귀식의 타당성을 검증하였다.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1819-1824
• /
• 2014

건축물 에너지 효율등급제도, 건축물 에너지 소비증명제 등 건축물 에너지 관련 법 제도가 지속적으로 강화되면서, 이에 대응하기 위한 고성능 단열재, 기능성 유리를 적용한 창호의 개발이 활발히 진행되고 있다. 에너지 절약을 위한 기능성 유리의 중요성이 크게 부각되고 있음에 따라 진공유리에 대한 관심이 높아지고 있다. 진공유리의 핵심공정 중 모서리 접합공정은 진공유리의 기밀성, 강도, 형상에 있어 매우 중요한 공정이다. 본 논문에서는 수소혼합가스를 이용하여 전기로 내부에서 두 장의 유리를 접합하였다. 공정변수에 따른 접합유리의 강도와 형상을 측정 및 분석 하였으며, 다구치 실험계획법을 이용하여 접합유리의 강도를 예측하였다. 추가실험을 통해 예측 값과의 오차율을 확인함으로서 실험의 타당성을 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.817-820
• /
• 2001

This machine is a high-vacuum exhaust sealing device which makes the inside of PDP element in high vacuum state, blows inactive gases into it and finally seals it. This machine consists of vacuuming parts, heating parts and exhausting parts. Applying the energy saving technology, this machine improves the temperature uniformity of vacuuming and heating parts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1795-1797
• /
• 2001

This machine is a high-vacuum exhaust sealing device which makes the inside of PDP element in high vacuum state, blows inactive gases into it and finally seals it. This machine consists of vacuuming parts, heating parts and exhausting parts. Applying the energy saving technology, this machine improves the temperature uniformity of vacuuming and heating parts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.709-710
• /
• 2012

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.643-646
• /
• 2002

Sealing of two glass plates composing of PDP panel was done in a vacuum chamber by using an auxiliary heating line(AHL). In order to improve the uniformity of sealing temperature and reduce the panel temperature during sealing, the AHL was introduced by a screen printing method inside a frit glass and used as a part of heating source for the frit melting. By using the AHL technology and the specially prepared frit glass, we have successfully sealed a PDP test panel without bubbles and any leak through the frit glass.

• Journal of Information Display
• /
• 제5권4호
• /
• pp.18-22
• /
• 2004

A carbon nanotube field emission display (CNT FED) panel with a 2 inch diagonal size was fabricated through screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20nm. The sealing temperature of the panel is around 390 $^{\circ}C$ and the vacuum level is obtained with $1.4{\times}10^{-5}$torr at the sealing. The field emission properties of the diode type CNT FED panel are characterized. Currently, we are in the process of developing a triode type CNT FED with a self-aligned gate-emitter structure.

• 항공우주시스템공학회지
• /
• 제2권4호
• /
• pp.25-30
• /
• 2008

In general, we utilize momentum wheel to control spacecraft. It needs vacuum test to analyze the effect of space environments. The conventional vacuum connector which is composed of steel has problems for test with built in momentum wheel because of weight, thermal expansion, etc. We suggest possibility to manufacture the vacuum connector using aluminum mount, epoxy and industrial D-Sub considering cost, weight. We verify the performance through vacuum test.